I try to save a .jpg or .png, the image file is corrupted. With JPEG's, it'll display most of the image, and then the rest will be just grayed out. With PNG's, I will get just a Red X in Internet Explorer, and a "image cannot be displayed because it contains errors." in Firefox.
View 1 RepliesGIMP closed while I was in the middle of saving an image and is now telling me that the xcf is corrupt and that there is no usable data in it even though the file is the same size as it was before the crash. This is the third or fourth time it's done this to me. I'd include the file but this is the first time I've posted here and I don't know how
View 6 Replies View RelatedProgramme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
When I try to add a rating to an image, i get an error message: the requested change could not be completed because the catalog is corrupt. You can attempt to repair in file - catalog.
View 1 Replies View RelatedI'm using an iMac with CS6. I have an external Maxtor 1TB drive that is 13 months old. when I attempted to access a PSD file from the drive and received an error message telling me that the document was not a valid photoshop file. I looked at the directory at this point and noticed that the preview icons for many of the photoshop and jpg files on the drive were disabled. In each of these cases, the files will not open.
I have:
1. Repaired permissions and volumes on the external drive.
2. Changed the file extension and attempted to open.
3. Opened the file in a hex editor and looked for extra lines of code, or text, or whatever.
4. Copied the file to a different drive.
5. Attempted to open in a different program (Preview, Illustrator)
Â
In no cases will the files open, and I'm stumped. The drive itself seems to be working fine. Not every file is affected, and the files that are affected are both in a variety of locations on the drive and were created over a period of years.
I am evaluating x6 and considering upgrading. I have been a daily Corel user since the 1990's and usually do every-other upgrades.
Anyhow, I am having a problem exporting TIFF images. The bottom part of the image is corrupt. White band. Interesting, if I open the TIFF in Corel PhotoPaint it's perfectly fine and fancy, but If I preview in Explorer I get the band, emailing it the recipient complains about the white band which obliterates the bottom 100px or so.
As far as I know the Adobe TIFF spec has not changed since 1991, maybe 1996..
So is this a limitation with the trial upgrade or a bug or a weird harold situation?
Everything else seems great, I'm excited about running corel 64 bit on an 8 core machine with 16 gb, It does seem like there have been some things removed which were previously very useful for production, and now they are gone or perhaps just missing. For example, how do i pop out the pallette and see all the colors at once? I think now I have to scroll at the bottom and it's annoying as heck.
I have a nice image that has lost the red channel histogram data for about half of the image. It can still be viewed, and the preview is correct.
Can I copy the histogram data from the red channel of the non-corrupt portion of the image? I know it's the red channel because when I open the color data from the corrupted portion the red channel is literally non-existant.
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI want to save this image as a circle to import into adobe after effects or magic unfortunately it save into a rectangle or square on my pc and so when I save it has the border and white bitsand if I import it into Magic the round football effect is lost is there anyway I can save this and import it into Magic or Adobe as a circle and not a square?
View 9 Replies View RelatedAfter saving my business card design as a .pdf, when I open it in acrobat it look wonky. All the lines are squiggly, when I zoom in it changes, sometimes it looks like it should other times it looks worse
Â
Is this like in photoshop when you zoom in, sometimes it looks stairstepped and other times it looks like it should? I'm sending these to print and I want to make sure everything is good.
What size do I save images. They will be put onto a usb stick for a client, which will use them for printing and social media
View 2 Replies View RelatedLevel: Newbie'ish  OS: Win7 64bit  PS: CS6
Â
 I have been making a simple image of a 300 by 100 rounded rectangle and then adding various layer styles. Basically I am makeing mobile headers which will be used for mobile websites.
Â
Today I was reviewing a few that I have made and noticed that when I open them in their .png format and then create a selection around one (Ctrl + Click) that the lower right coner is not being selected as rounded but as a point and so when I copy and then paste it into a new document it has three rounded corners and one somewhat visible pointed corner. ?? ??
Â
The file has a BG layer and two shape layers (or sometimes just one shape layer). I select the layers and then merge them together and turn off the BG layer beofore I save them for the web. I have also tried just saving the file as a .png w/out merging the layers but no matter how I go about saving the file(s) most of the time one corner is saved w/that annoying and imperfect sharp corner.
I installed Photoshop CS6 extended full version on Mac Os 10.7.4. When I try to save an image as a tiff I get a .raw, if I choose jpg I get .dcm, for pdf .jcm and so on. I already deleted CS6 prefs.psp,
View 2 Replies View RelatedWhat do I have to do in order to make white color transparent and save a transparent image?
View 4 Replies View Relatedwhen i "SAVE FOR WEB" an images, on the preview screen to adjust the settings, the image is noticably lighter in tone. i have changed the settings in that screen to .gif, .png, and .jpg and no difference is seen.
View 3 Replies View RelatedI have some third-party presentation software that requires all images be 8-bit. So I used Photoshop for all photo editing and made sure my PSDs were 8-bit before exporting stills (PNGs) for my presentation. 50+ PNGs were successfully created this way, but i'm having problems with a single file. When I open the correct files in Windwos Pic/Fax View, right click, show properties, go to Summery (advanaced), all the correct files have a bit depth listed as 24.
My problematic PSD says it's in 8-bit, but the PNGs that I create from it are consistently listed as having 32 bit depth in Windows Pic/Fax View. As a test I exported other images formats (TIFFs, JPEGs, etc...) and they all came out as 32 bit depth. How do I fix this? I tried opening the PSD, saving as different name, switching to 16-bit and then back to 8-bit, still didn't work.
I have sliced up my image, and optimized it using save for web and devices,
but when i save it out to a folder, i do not get a seperate image folder with all my pics in. My images and html file are all in the same folder.
If i create my own image folder and drag the images into it, then it breaks the link in the html page.
how to save an image in photoshop so I can open it in Illustrator? I want to the image to open with it's outline to be the image, and not the bounding box. I know it has to do with making a selection around the image in Photoshop, and making that selection into a path, but then I'm lost..
View 7 Replies View RelatedI'm using CS6. For example I change the image size to a 4X6 and then save it. Then when I open the file it will be 7.5X5. What's the fix?
View 5 Replies View RelatedI tried to save a few pages as one PDF.But it was an epic fail. However, i must have cganged a vital setting, for now when i save PSD files to PDF, the image reduces massively in size, but the file size increases a lot. What have I done and how can i change it back?
View 3 Replies View RelatedMy image in photoshop has thin lines, but when I save it, the jpeg shows the image with very thick dark lines, looking not like the image in photoshop. Why does it do this? How can I stop PS from doing this to my image? I want the image to look as it does in Photoshop when I save it as a Jpeg.
This is in Photoshop CS4
As it should be (using the snipping tool (I can't use the snipping tool as my only option, because it will only capture the size as it is on the screen, not the actual dimensions in Photoshop)
Â
Saved as a Jpeg; the lines are thicker, and now there is little variation in line weight.
I am using PS CS3. I would like to know if it is possible to save the edit history of a file - for example if I open a file I worked on a week ago I want to be able to find out what work had been done to it (eg levels, sharpening, curves etc). As far as I know, history is lost after a file is saved (in a flattened image).
View 1 Replies View RelatedI have a series of actions that copy a document, apply a colour profile, resize and then save as - so I can export as jpeg. These actions work individually but currently I have to enter a file name.
What I'd like to do be able to do is select an action which runs say three or four of those actions - say export at 600, 800, 1200 pixels dimension and also suffixes the file name with that number.. so IMG0001.JPG becomes IMG001_800.JPG, IMG001_1200.JPG etc etc.
try to save an image in IMAGE READY, I get this message:" Could not complete this operation because an assertion has failed" What's this? What can I do? Should I re-install Photoshop 7.0.1?
View 2 Replies View RelatedI have saved several hundred images from a jpg format to jpg for web, (optimized), but it loses it brilliancy to colors. I am using the Sharpen filter and Shadow/Highlight to edit the image. But it loses that little bit of edge once it goes to save for web.
View 9 Replies View RelatedI created a logo in photoshop. It has no background. When I save the logo in another format for use in other programs it saves a square white background. This is bad when i want to paste the logo ontop of an image. How do i save the logo without the white background?
View 3 Replies View RelatedWhen saving a file with a solid, dark blue background as a JPG in PS CS4, it's producing a very faint border around it. On a web page, it needs to blend into a background that has the same color as that of the JPG; but it shows the faint borders. It also shows it when saving the file as PNG-24. How do you get rid of the border? What's causing this?
View 7 Replies View RelatedI'm trying to save the image in Photoshop under Save for Web. However, the optimised images always have a slightly yellowish tint.
View 2 Replies View RelatedI recently got a new computer. I use CS3 to edit. For some reason, whenever I resize the image, save it as a Jpeg and post it to the web, it loses image quality. Severely. I've never had this problem before....until this new computer. I usually resize the image to 800, then simply click on Save as Jpeg. Â
View 2 Replies View RelatedI am trying to save all the layers I have in my PSD file as separate layers in a folder that I created. I trying to do this by going to File- Scripts- Export Layers to Files but when I set it up and do this I get an error message saying:
Â
"General Photoshop error occured. This functionality may not be available in this version of Photoshop. -The command "Duplicate" is not currently available."
Â
I am not sure why this is saying "this version" considering I installed it not too long ago and the document has been made a few days ago meaning I never even used another version of photoshop. I have all the layers visible too and even selected them. I am using Photoshop CS6 by the way.
I have a png image, of 256x128 size. It has 8bits per pixel for color. Now this image's size is 97kB. I open it in photoshop, I save it as different png file, and then... this image is 7kB of size.
View 7 Replies View Related