I'm using Gimp 2.8 to change print size to 6 x 4. Original image is 1600 x 1200. So I go to „Print Size“ and change size in inches to 6 x 4 (naturally unlinking „chain“ symbol). I then save the image but when I reopen its at 6 x 4.5 and of course it prints this size.
I have a photo in PE Organizer/Editor which according to the document size it is 6.6667 inches x 8.917 inches. I know to select image from the menu but not sure whether to select image size or canvas size?
I select Print, choose the print settings, print size 4 x 6 inches, image only - don't want a border, then this message appears: the following images will be rendered at less than 220 dpi at the requested size.
This can't be done in PE and I have to use crop to resize. I surprised that PE cannot resize to inches.
I searched further and found a video on Youtube that demonstrated that PE will resize to inches. The steps in the video were:
1. Select resize, image. 2. Document size: Enter 6 for width, 4 for height and 300 for resolution (for printing) Check Scale Styles, Constrains proportions, Resample image, Bicubic 3. The pixel dimensions automatically changed to 1800 width and 1200 for height.
In the video the above steps worked. In my PE, I followed the same steps but the Document size for width changed to 2.99 after I had entered 6 and the Pixel size for width changed to 897.
First, PE change resize to inches but for some reason my PE 11 changes the width after entering 6.
I', using CS4 on Windows 7. I'm making a 24x36 poster with lots of images on it. Each image is it's own layer. Some of the images are too big and I need to make them smaller.
Instead of just using Control+T and holding shift to make them smaller, I'd like to be able to specify in inches what the resized image should be (like 5" wide for example). Is there a way to do this? I see the % boxes, is there something similar for inches? I can't figure it out. I've got Options turned on under Windows.
I have a client who has a set of .ai files they need resized to meet various epub layout specs. Apple and Kindle both are different sizes so I need to know the best way to resize an .ai file 11.25 x 5.65 inches into a smaller dimension in pixels while retaining the layers.
I created a new image with the dimensions 11x8.5 inches and now when I scale ANYTHING it uses inches and I want it pixels, I CANNOT figure out how to convert the units into pixels!! it is NOT under 'units' in the menu!
Out of nowhere my AutoCAD commands such as line, offset, circle, etc will only work if i type in the amount in inches. I use feet / inches when i use these commands. It says specify second point... Not sure what this means. For example I want to offset a line 15'-8". It won't let me do that. If i offset a line at 146" it lets me do it.
I have a picture that is approximate 5 inches, by 10 inches. I want to blow the picture up to approx. 19x7 inches. But my question is, after I blow it up, and place it on a new image template, how will I know the "final" product will be proportioned correctly (with exact correct proportions as original pic) when I print it out.
Does GIMP "automatically" proportion the image correctly, or is there some mathematical equation/something to figure out the correct equation.
I am completely new to gimp I have an image that is 8in x 6in. It was previously edited in Photoshop on another computer thats how I know the actual size. When I load it into gimp, the image size is in real life the same, I can take a ruler to the screen and it measures 8in x 6in at 100% zoom. However, according to gimps rulers, the image is over 11in x 7in. So I measured what is one inch on gimps ruler and it is actually 3/8in in real life. When I create a grid to overlay the image, through Filters-Render-Patterns-Grid and I make the settings to be 1in x 1in, it too shows up based on gimps ruler measurements. I have the ruler set up in inches but a gimp inch is not a real life inch, and this shows up when I scale the image to 8in x 6in it actually makes the image 5 1/2in x 3 3/4in in real life when printed out. How can I get gimp to display a real life inch and how can I get my images to print out based on real life inches.
I enlarged a photochrom image (which gimp converted to rgb) to twice its original size, but when I wanted to see its dimensions in inches the image scale showed 6.667 x 4.887, which is half the original size. This can’t be possible, the enlarged image is quite big. I set the resolution at 300, if that makes a difference…
Just starting using GIMP today and want to do what I thought should be very simple. I have some images for which I have words that need replacing. I therefor want to take a slice of the background colour and copy that overtop of the text. I have tried to use the rectangle tool to copy and paste the slice. However I am unable to workout how to expand the slice (expand the width) overtop of the text.. I thought it should be a simple matter of dragging the rectangle out to the desired width. I have also tried changing the pixel amount in the Tool options section. how to expand a rectangle?
I recently acquired a new Macbook Pro laptop and installed GIMP on it. I have been using GIMP for years on a PC but for some reason I cannot figure out how to resize tools (The smudge tool particularly). I have GIMP 2.6.
Using GIMP 2.8.10 in Windows 8.1. The two default dialogs open are Layers and Brushes. The Layers dialog takes most of the space. I want to shrink it vertically but when I try to drag up the cursor with the two vertical arrows it moves by itself without resizing the dialog. When I do the same horizontally it works fine. I would like to see less of the Layers dialog and more of Brushes dialog. How do I do this?
The size of my picture is 383 x 473 . I have to change the size for dvlottery to 600 x 600. How can i resize my picture to 600 x 600 in gimp without changing the picture?
I usually plug a drawing tablet and it works great with GIMP on a Ubuntumachine.
What I want to ask is this:
I want to plug a mouse. Normally movements either of the pen on the tabletor of the mouse are mapped to the cursor.I want to keep the mouse plugged while unattaching it from the cursor. Sothe cursor is only tablet driven. Then I want the brush size to be driven by the Y value of the mouse, whileI drow with the tablet.
Maybe editing the input devices editor? Or will I have to operate on Xserver also?
My end goal is to create simple bitmaps that only contain a bit of text in them in black and white.
To do this I am creating a new image and some default size. I then add the text , set the background colour to black and the text colour to white and create my text.I am using the snap to canvas edge and sit it up in a corner.I then want to resize the who canvas to be the same size as the text block created and save the image. How to do this?I have seen the crop tool and can select the area I want but cant figure out how to save this as a new canvas/image sized only to the size of the text.
I have a netbook Acer AspireOne D255e, which max resolution is 1024x600. When I try to run GIMP, it's impossible to use it, because all the tools disappear on the window.
Is there the possibility to resize the GIMP window to fit on my screen?
Regarding Gimp version 2.8.2, I'm posting text to a picture, the trouble is when I highlight and try to resize the text it disappears. The text layer is still on top and the eye is still visable, so the text should be visable.. I have tried different fonts and colors and sizes with no success.
Is there a way to just splice my image up into 16 512x512 squares? like a tile set (which by the way I'm sure my math is screwed up on that so how many squares I need to cut out a 2048x2048 image for 4 on top and 4 on the sides that'd be great. I suck at math)
I tried copping and stuff but I can't seem to use the tools right. I wrote a lengthy detailed version of this but figured it was too much to read so I am editing/cutting all the details out
Also the resize part. nevermind I got it figured, I just had to resize the image and the canvas follows suit. I didn't know that, thought I had to resize canvas first then image like in photoshop.
When Rotating or Resizing an image I have recently run into an issue. This is new behavior so I think I either have something set incorrectly, or it came in with a recent re-install.
When Rotating or Resizing, and setting Clipping to Adjust, it always Crops the image.
In other words: If I were to attempt to stretch an image bigger than 1000x1000 to say 1500x1500 it appears to do all the correct calculations, and does stretch the image, but anything outside the original 1000x1000 disappears.
Likewise if I were to attempt to rotate an image that were say, 1000x1500, 90°, I would end up with a rotated image 1000x1000 in size, and transparent/background for the balance of the original 1000x1500 sized image.
I've tried uninstalling/reinstalling (it remembered all my settings, so I don't know how much good this might have done), setting the Clipping option to Clip, then Crop and back to Adjust again (also with no result).
I've been trying to resize an image and tried Gimp 2's interpolation method but nothing happened. I increased the size to 150% with 153 pixels (I think). Did I do something wrong or is Gimp just not good for interpolation?
I want to know how to resize one of my photos to 190px wide by 147px high? When I do it becomes super blurry and I need it to be crystal clear...am I correct in assuming that it has to be a landscape picture? Are there special sharpening tools that I need to use, etc.?
I have to use the Image > Canvas Size option to resize the size of my canvas to a wanted size. However this means a lot of trial and error to get the canvas size the same size of my current selection. Is there a quick function that would resize the canvas size to my current selection?
is it possible for gimp to have those windows with text(small in layers) to keep same height-width..
its very annoying to make something in gimp with a lot of layers, they become small! too small, and then when i want to delete many layers, they stay small.