is it possible for gimp to have those windows with text(small in layers) to keep same height-width..
its very annoying to make something in gimp with a lot of layers, they become small! too small, and then when i want to delete many layers, they stay small.
I want to be big windows all the time.
Im new to gimp and wanted to make a GIF. I watched a few Youtube videos and followed all the steps until saving as a GIF. On the versions they used (i am using 2.8) there was a box to stop it merging layers but i can not see this on 2.8.
Now whenever i save as a GIF and try and use it, it only shows the last layer.
PS i know you need to export to save as a GIF.
I am having problems with Gimp windows freezing and the resize buttons disappearing. I am not able to move the windows around, change window etc.
View 1 Replies View RelatedI'm creating a drawing with multiple layers, but I keep dragging the background layer by accident. I've tried selecting the layer I want to move before dragging with the move tool, but this doesn't stop it. I've tried selecting the chain in the layers toolbox, but this just locks the layers into one group which gets dragged off the edge of the canvas. Is there any way to render the background stationary?
I'm using GIMP 2.8.0
Can you resize a layer?
View 2 Replies View RelatedMy end goal is to create simple bitmaps that only contain a bit of text in them in black and white.
To do this I am creating a new image and some default size. I then add the text , set the background colour to black and the text colour to white and create my text.I am using the snap to canvas edge and sit it up in a corner.I then want to resize the who canvas to be the same size as the text block created and save the image. How to do this?I have seen the crop tool and can select the area I want but cant figure out how to save this as a new canvas/image sized only to the size of the text.
How can I resize a image and layer once I have created the image? When I print the image, it always come out the same size .
View 1 Replies View RelatedI am trying to re size my text layer so that the borders would align with the edges of the text, but every time I adjust the upper part of the layer the text itself would shift downward, cutting off the lower part of the text. Is there a way I can conveniently adjust the layer so that it looks like the text fits the layer.
Example I am trying to achieve is something like this.
The problem I keep getting is this.
This just started happening after I downloaded DWG TruViewer. I am working on LT 2008 using Fusionware on a MacPro. I needed the viewer to convert newer drawings from an architect. Now, when I double click on a drawing in Explorer a separate AutoCad window opens for each drawing I need open. I prefer to just go up to Window>and click on the one I need at that time, especially if I have several to switch between because it is easier to see the file name I want.
SDI is set to 0
Taskbar is set to 0
Relaunched the program
I can't open files using File>Open because the program crashed each time and Autodesk is not issuing anymore fixes for 2008. (Yes, we should upgrade but there is no money budgeted)
Right-click on any .dwg file and go to Properties>General>Change> and select the AutoCad LT launcher as the preferred program
Since I am in Window 7 instead of XP the File Types tab has been removed from Folder Options so I can't fix it that way.
So, why did this change? FYI that stupid TruViewer made lots of unnecessay changes to my AutoCad and Explorer programs that I am still trying to sort out like changing the file icon and hiding the file extensions. Are they trying to make it hard to find files or what?
And next, how can I reset the default so that double clicking on a .dwg in Explorer opens in already open AutoCad window?
A friend of mine got a new computer with Windows 8 (64).Intel Core i7-4770, NVIDIA GTX 645...Now he has installed GIMP from GIMP-org Everything works well, but it can not rearrange the layers with the mouse.Even he can not adhere Register to other docks with the mouse. He also tried it with GIMP Portable and Partha GIMP Portable (64) with the same effect.
View 11 Replies View RelatedWhen I resize canvas my 3d text also resizes.How do you stop the 3d text from resizing when canvas resizes?
View 5 Replies View RelatedWhen I resize canvas my 3d text also resizes. How do you stop the 3d text from resizing when canvas resizes???
View 4 Replies View RelatedI have installed photoshop CS on a Dell Latitude e6520. The installation completes successfully and I was able to active the product via the telephone. However when I go to launch the product it get all the way to the work area and then when I attempt to click anyhwere in the application it says "Not Responding" and then closes the application.
I have updated the nVidia Driver thinking it maybe a grahphics driver issue but still no luck. I have already uninstalled and reinstalled the product about a dozen times with no luck. What can I do to fix this problem.
I made a wax seal on Photoshop with a lot of embossment, bedevilment and a Smart Filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize it (Ctr + T) It pops up a message that reads:
______________________________________________
Adobe Photoshop CS6 Extended
"Smart Filters applied to layers contained in this group will be turned off temporarily while the transform is being previewed. They will be applied after committing the transform."
OK
[] Don't show again
______________________________________________
I click OK and I re-size the layer with free transform, and then hit enter. The Layer is resized but my Smart Filter which creates a wavy affect around the seal is totally distorted.
How do re-size my layer with smart filter without affecting the smart filter aspect of the layer.
I would like to make a composite image with source images making up the various layers (so I can work my magic on each layer indepent of the others). The problem I have is that not all of the images I'm using are to the right scale. What I want to do is resize those layers that are too big. Here's an example...
Let's say I have 5 pictures that I want to use to make one composite image from. The main background layer will be made from an image that is, say 800x600.
Another picture (let's call this subject 1) is 600x600 and is already at the right scale if I cut out the portion I want to keep and lay it on top of the background layer.
Yet another picture (subject 2) is huge (think 2000x2000). I would like to cut out the portion I would like to use and drop it in as a new layer and then obviously re-size it down to the correct scale. I'd prefer to do this directly in the composite image I'm making on its own layer to ensure I get the size right (and without manipulating the image guess-work style before I cut/paste it in).And so on...
I've found ways to make the canvas bigger (not what I want to do)... but not anything on how to resize the images on individual layers without impacting the other layers. Is there a way to do this?
On my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies View RelatedI try to run Photoshop.exe, but it doesn't respond. I get this error message. How to fix it? I have no idea where is a problem? I had no problems with it earlier.
ERROR MESSAGE:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Photoshop.exe
Application Version: 8.0.0.0
Application Timestamp: 3fce5708
Hang Signature: 1875
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1063
Additional Hang Signature 1: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 2: 848c
Additional Hang Signature 3: 5c7261f725b6a443e8327138a3fe0208
Additional Hang Signature 4: 1875
Additional Hang Signature 5: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 6: 848c
Additional Hang Signature 7: 5c7261f725b6a443e8327138a3fe0208
To start with, I've never even seen this option before, but I've come to understand in looking for a way to fix my irritation, that it's been around in every version of Photoshop. My understanding of the keyboard shortcuts for Zoom has always been this. Ctrl + : Zoom in without resizing the window.Ctrl - :
Zoom out without resizing the window.Ctrl Alt + : Zoom in AND resize the window to fit.Ctrl Alt - : Zoom out AND resize the window to fit.Ctrl Alt 0 : Go to 100% and resize the window to fit. One way or another, I believe in my initial setup of Photoshop CS4, I toggled the Resize Windows to Fit option off. So using any of my keyboard shortcuts, wasn't working. The exception being if I manually resized the window first (ie: drag it out so window is larger than the image, then zoom). Doing that makes it all work properly. Tonight I go looking for why, and I find that option. I turn it back on, try my shortcuts again....
and it still fails completely unless I use my exception. The Zoom Tool, on the other hand, works like a champ. At this point I've tried restarting the program multiple times, but haven't attempted to reboot yet. I doubt rebooting will accomplish anything restarting the program hasn't. What's going on here? Is this a bug? A feature? Does "Ctrl Alt whatever" not work anymore in regards to resizing windows?
I found a PDF of CS4 shortcuts that indicates otherwise. I've found plenty of articles about turning this option off, but only two or three about turning it back on, and absolutely nothing about my problem. As an aside, I'd like to know why everytime I minimize Photoshop it feels the need to collapse all my pallets. This is irritating. In fact, it's starting to feel like every new revision is plagued with more irritations for me than added benefits. Anyone able to tell me what's going on here? If it makes a difference, I'm working with the X64 version.
On a Mac -- CS6..All of a sudden my document windows refuse to resize. I was sent an Illustrator file by another artist and now all windows only open to the size of his window. Can't change any of them.
Tried restarting the program twice and thought I reset my preference.
It's duplicating the layer style along with the layer which is fine but now when I change the style on one layer it changes all of those other layers as well. Is there a way to turn this off? I even tried removing the style and adding it new and it still changes the original!
View 1 Replies View RelatedI want to edit on a certain layer, for example layer 1: My current layer happens to be layer 2, so: I click on layer 1 to make it current. I do the editing & it isn't quite what I want, so I undo theaction. As I undo the action, CS6 also undoes my layer change (i.e makes tolayer 2 current again) even though I want layer 1 to remain the current one. Is there any way to change this in edit preferences or somewhere?
View 6 Replies View RelatedI am using 2013 C3D with SP1. After I publish sheets using the sheet set manager my layer filters stop working (will not filter layers, it will just display the last layer filter used prior to running the sheet set manager).
View 3 Replies View RelatedI have supposedly disabled all the "snap" features in Photoshop, however, whenever I try to make minute transforms with the skew tool it always "snaps" (often closing a huge gap) to either it's previous vector, or one of the other points.
How do I stop this before I hit my head on the desk repeatedly in frustration?
Ctrl, etc., like with the move tool, does nothing differently.
While opening new picture with gimp, it asked me if i want gimp to change the orientation of picture. I accidently marked "Do not ask again" and pressed "YES" button. So now, every time i open new picture, it automatically changes orientation(rotates whole picture 90deg). How to stop it?
View 1 Replies View RelatedI don't want my images to default to "snap to guides." I have guides up on most of my files because I use them for spacing my comic; I work from a template so I can have consistent sizing. But I only rarely ever want to snap to those guides.
Yes, I can turn off the snapping, but I have to do this EVERY F***ING TIME. Open a file I've been working on already? Gotta disable the snapping. Open a new file? Gotta disable the snapping. Restarting GIMP because it just crashed? Gotta disable the snapping. Every freaking time for each freaking image. Gimp won't save the setting to the file nor to my preferred settings.
How can I get GIMP to stop setting the guides to snap by default?
Just got my Wacom draw tablet working with GIMP....but now I have a whole new set of issues GIMP will not respond to either the Wacom pen or mouse then stops responding to my main keyboard and main mouse ., lets me draw a little on one layer and then just stops working. Today when I tried to configure the tablet settings in the tool box it didn't read the tablet at all. And yes the tablet was plugged in. I think I am starting to hate GIMP.
View 1 Replies View RelatedI'm having a bit of an annoying issue regarding the text tool. I have a bunch of text layers in an invisible layer group. When I try to create new text in a layer that's outside of this layer group, it will select an existing text layer located wherever I click -- even though the selected text layer is invisible and in another layer group. I simply want to create new text on a new layer wherever I click and not worry about selecting invisible text.
View 2 Replies View RelatedI use the GIMP all the time and I love it! I'm not a realexpert, but can do mostly what I like.
I'm using Gimp 2.6 on Ubuntu. I open the GIMP, and I'm going along just fine, then all of a sudden I can't get the dialog box for a tool I'm using and I can't view the layers tool box. If I close everything and open GIMP again, it will work for a while.
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedIs there something I can do to stop the appearance of random straight lines? They appear to randomly leap out from the tablet pen curser to the edge of the screen. Pressure sensitivity does seem to work--everything works perfectly with the exception of these bizzare lines!
View 1 Replies View RelatedI can no longer make changes to one of my gimp files. Everytime I select a tool such as pen, pencil sprbrush, the mouse icon changes, but when i try to draw nothing happens. It seems like all the other tools work, i tried the following
1. made sure the correct layer was selected
2. exit gimp and re-run it.
I'm stuck.
