GIMP :: Remove Small Islands Without Having To Rub Them All Out Manually
Mar 9, 2013
I have a map. I would like to remove small islands without having to rub them all out manually (its a very big map).
I'm not too bothered about the criteria for selecting small islands - I would just like to specify an approximate threshold diameter or something.
The sea is one uniform color. And this color doesn't appear on land. Sort of like a noise removal filter, but I don't want the coastline of surviving islands to be smudged. I.e. islands that are not removed must not be touched and the removed islands must be removed completely.
I have tried selecting all the sea and then growing the selection to swamp small islands and then shrinking the selection again but this didn't work very well.
See attachment to clarify. I have colored islands that I would like to get rid of in red (very roughly). This is part of the full image. The actual image has just water round the boundary (no land touches the image edges) (Also there are some islands within lochs - ideally these would be selected also, but the majority are within the sea,)
View 5 Replies
ADVERTISEMENT
Sep 30, 2011
In contrast to version PSPPX3, the new PSPX4 has implemented a tool that will remove all necessary keys and folders from your system. It works on all supported systems without problems.
follow the description below if you want to remove PSPX4 from your system.
How to remove PSPX4
Go to Start - Control Panel - Add and remove (XP) / Programs and Features (Vista, Windows 7) and remove PSPX4.
Restart the system if you want to reinstall it.
Additional note: No further action is required. Using other uninstall tools is neither good nor necessary.
View 14 Replies
View Related
Jun 24, 2013
My problem is My PSP X2 stopped working so I tried a repair all to no avail ..I then tried removing it via windows add and remove which it said it had done ..I then tried reinstalling it But a message came on the screen saying I already had PSP X2 installed on my computer still? I then used Revo unistaller program which found I still had it on my computer and which removed it (according to Revo) and again I tried to do a fresh install only to yet again get the message I had PSP X2 installed ..So somewhere in my computer PSP resides
View 2 Replies
View Related
Mar 6, 2014
I am having constant issues with PSE 12 crashing and support is absolutely worthless and non responsive.
I want to manually completely remove PSE 12 in order to attemp to re-install it. Where can I find the complete steps to manually remove PSE 12?
View 1 Replies
View Related
Jul 19, 2013
How to draw along a path I created. But everything that I've found seems to be telling me to use the "Stroke Path" tool. But I don't want the program to actually draw the line for me. It doesn't provide the same style as if it was done by hand.
Is there any way to 'lock' my cursor along a path I created so that I can draw along it manually?
View 5 Replies
View Related
Mar 15, 2011
How do I remove a small section from the middle of a clip? The help section tells how to shorten a clip or split it in two but not what i want to do.
View 3 Replies
View Related
Aug 2, 2011
I realize this will be a ridiculously basic question for most of you since I'm very new to Paint Shop Pro, but I've been trying all sorts of tools today trying to find the most efficient way to do something.
I sell clothing online, and I'm looking for the best way to quickly remove the price from an image of the retail tag. Everything I've tried seems to be tedious, so I don't think I've got the right tool so far. I just want to be able to do what was called a "Smart Erase" in my old Digital Image Pro program -- I simply drew a quick outline around the area to be erased, and then clicked on the erase button, and the price was gone off the tag (it inserted the same background area there).
View 2 Replies
View Related
Dec 9, 2012
I know that to merge different sections they have to be on the same layer / sublayer then you should cut them so they merge or rather it's not closed. That is exactly what I did and the little gap you see in the image, I can't get those two to merge together as one seamless object ?
View 8 Replies
View Related
Dec 18, 2013
I am trying to create islands of surface by multiple enclosed polylines as boundaries.
Each enclosed polyline has several 3d lines as drawing objects.
After creating the surface from the 3d lines I use "Select similar" to select all boundaries(enclose polylines) and add them as boundaries using the "Show" option.
However, it is not working and I do not see the islands of a surface.
View 2 Replies
View Related
Sep 27, 2011
I have prepared a video and a sdf-file for you to reproduce my problem, and that is:
I have two polygons in my sample-sdf, one having an island. I start the command _MAPFEATUREMERGE to join two polygons. Having done that the island is lost. I can't believe that this (losing the islands) is "as designed".
I have tried this with:
WinXP(32bit) Map3D2012 (32bit)Win7(64bit) Civil3D2010 (32bit)Win7(64bit) Civil3D2011 (64bit)Win7(64bit) Civil3D2012 (64bit)Win7(64bit) Map3D2012 (64bit)
I have tried this with:
SDFSHP
View 9 Replies
View Related
Feb 6, 2007
just test my code about create a stair 3D,still running the program and then appeared a display box,with said "Error analyzing internal islands",what meaning it said?.at attach file with "Error Analysing-1.jpg is the result that program.
View 1 Replies
View Related
Jul 26, 2012
I am trying to export very small (490 x 121) 1-bit graphics out of GIMP as .pcx files. With my working .xcf pulled up, I go to Mode> Indexed and select "Use black and white (1-bit) palette" from the Indexed Color Conversion box. Then I export my graphic as a .pcx, but the graphic is not 1-bit, it is 8-bit, the file size is around 10k, instead of being around 3-4k like it should be.
I am using GIMP 2.8.0 on a Windows XP box. I've attached my .xcf for reference.
View 3 Replies
View Related
Jul 13, 2012
We would like to use Gimp for a small set of image conversion experiments. Unfortunately, the system where we want to install and run Gimp belongs to a US Govt agency, the environment is secure and their data is extremely sensitive. So we need to get their approval before we can install Gimp. To get it, we need to provide information on whether Gimp is "US-based" or "foreign-origin". We don't have a strict definition of what either of these terms means, but I am wondering if you have encountered these questions before. Can you tell me what the geographic origin of the tool is? Do you know of any specific instances of your tool being installed at any US Govt locations with sensitive environments?
View 2 Replies
View Related
Oct 21, 2012
I have a small logo (92x80 image) that I want to round the corners on. There seems to be two ways to do this. One is the filter/decor method, but this is greyed out in my menu. The other is select/rounded rectangle; I can do this one but I can't get it to complete the procedure. After selecting "rounded rectangle", I can see the dashed lines going around the rounded corners. But I can't get the rounded image to save - it saves as the original rectangle not rounded.
What am I missing? The on-line GIMP manual does not explain what needs done. I tried carriage return after selecting rounded rectangle, but that does nothing. I also tried every crop method I could find. I've spent about three hours trying to get the rounded corners.
I am probably missing something simple. Do I need to create layers - a transparent layer? I am not sure exactly how to do that.
View 2 Replies
View Related
Jul 13, 2012
I would like to know which tools to improve the border of a small image after rotation. Something like sharpening.
The picture is around 25px wide. When magnified, it shows like this :
The original image pure red and pure white.
The white line, that is a ~1 px from the border is at some points too much polluted by the red color. And the red color is locally too much polluted by the white color.
There is also some aliasing that I want to remove.
View 4 Replies
View Related
Apr 12, 2012
I want to enlarge a small photograph with the zoomtool.And when I try to save it on the desired percentage of 100% or so it returns back to it's original size ;After I have saved it as a new copy (image) with a new name.I have tried all the possibilities to save it within the larger size. Even by printer. Everything was in vain.But once it is transferred to the documents files it goes back to the original size.
View 4 Replies
View Related
Apr 30, 2013
even on gigantic images I seem to get this error EVERY TIME NOW! it doesn't matter what image and I DO NOT know what this 'input texture' that the error is talking about! there is NO option for an input texture!
View 3 Replies
View Related
Jan 18, 2014
I would like to repeat the following procedure on a large number of images but I am unable to find a way of batch processing to do this for me. The idea is to end up with a small plain boarder around the original image. This is to prevent any image being lost when I order prints due to cropping.
1) open image
2) copy the image
3) create a new image 0.5" larger than the original
4) paste the copied image into the larger new image
5) resize the new image to a given size for example 10x8 for printing
6) Save the image under new name or in a different folder to the original.
View 6 Replies
View Related
Oct 3, 2012
I recently downloaded gimp and am in the process of getting used to it.
I have discovered something that is a bit of annoyance to me. when adding text to an image, I get the following dialog box over where I want to put the text.
I have set it to use editor under the text tool, but it doesn't remove the on-screen floating dialog box, also selecting use editor doesn't seem to stick, and it reverts back to being unticked upon restarting the program.
is it possible to remove this dialog box, as well as make the use editor method the default?
View 11 Replies
View Related
Aug 25, 2012
My beautiful baby has light glare in her eyes.
[URL]
View 4 Replies
View Related
Jan 21, 2013
I have a drawing that is 720X596 px and I have used the rectangular tool and select - invert, cut out a 222X444 px part that I need to save as a jpeg. However, I can not figure out how to either : delete the 720X596 drawing to leave the 222X444 drawing: or, select the 222X444 drawing to save it.
View 2 Replies
View Related
Sep 25, 2012
When i brought up my brushes dock, among the brushes was a little design I had cut out! How it got there but it is definitely not a brush. The drop-down menu for the dock had "delete" but it wasn't active/useable. How to get rid of that non-brush?
View 3 Replies
View Related
Jun 29, 2011
it is possible to remove a reflection (that is basically a duplicate of an already existing image, if the angle is good) from a photo. I have a feeling it might be possible, and involves layers and cloning, however I do not know how to get this done. Almost like a reverse-cloning tool. Sample picture provided.
Obviously a lot of factors are involved like glare and angle, but say you could see through the glass, and the reflection angle is a perfect 45 degrees or almost a exact duplicate of existing image, just flipped, is it possible to remove the reflection image and obtain more of the other side of the glass?
View 4 Replies
View Related
Jul 20, 2011
I have a bunch of images that look like and I want to 'restore' them like
Unfortunately that took an inordinate amount of pixel-fiddling to do and I have over 80 more of them.
Even more unfortunately, that was an 'easy' image compared to some of the others:
Another easier one
I know basically nothing about image processing and my current workflow looks like:
irfanview: convert to grayscale
ms photo editor: adjust contrast
ms pain: clean-up what's left Obviously this is inadequate for the task.
Source images ...
View 14 Replies
View Related
Aug 3, 2006
I jsut got gimp, and I am using it to make wallpapers for myself and my family. I have a few pictures of my favorite baseball player and I would like to make myself a wall with them, but they all have a watermark on them. I would generally try and find pics without the watermark, but I can't find anything because he is not a big name. How to remove the watermark from the images.
View 12 Replies
View Related
Nov 19, 2011
While drawing with a tool, normally you have:
1. the brush shape2. the mouse pointer
3. a little image representing the tool in use.
Is it possible to disable both 2 and 3?
View 2 Replies
View Related
Apr 8, 2013
remove couple annoying white edges around the transparent PNG.
[URL]
Solution :Here is what I did in GIMP (how to do it in PS):
Open the image
Add another layer underneath the first.
- sample the green and paint the new layer with it
Select the original and do "Alpha to Selection"
"Merge Visible Layers"
Add Layer Mask -> Selection
Apply Layer Mask
Save as PNG
- Important: In GIMP there is a checkbox option to save transparent colors. Make sure it is checked!Reimport into the SketchUp material and it should work (did for me).I want to remove all white edges , i'm okay with black edges.
View 1 Replies
View Related
Oct 15, 2012
I am trying to remove the person in the background of the attached image. I believe I have finally installed the resynthesizer plug-in but am not successful in removing the person behind the couple shown.
View 1 Replies
View Related
Nov 30, 2013
I have a nice .jpg, but the subject has stubble on his face. How can I make him look clean-shaven? Can I do that with GIMP?
View 2 Replies
View Related
Nov 9, 2011
I have a black text image. It has a dotted cut line (ex - - - - - - - ) boxed around the image. How do I remove it ?
View 3 Replies
View Related
Jan 30, 2014
I am trying to create a form with a watermark image in Publisher 2013 and the text I want to overlay on the watermark is cut from an image I screenshot, so it has a white background, making overlaying a watermark impossible. There are boxes and bubbles and other items that I really do not want to re-create so that's why I am trying to do this first, before re-creating the entire forms from scratch.
Anyway, what I want to do is A. remove all of the white from the background (even in the spaces between the e's an B's and everything; yes I know it is insane, but I like things to be perfect) and B. I would like to darken the text. Currently is is almost gray-ish and I want it to be black.
View 3 Replies
View Related
