AutoCAD Map 3D :: Joining FDO-Polygons Loses Islands (MapFeatureMerge)
Sep 27, 2011
I have prepared a video and a sdf-file for you to reproduce my problem, and that is:
I have two polygons in my sample-sdf, one having an island. I start the command _MAPFEATUREMERGE to join two polygons. Having done that the island is lost. I can't believe that this (losing the islands) is "as designed".
I have tried this with:
WinXP(32bit) Map3D2012 (32bit)Win7(64bit) Civil3D2010 (32bit)Win7(64bit) Civil3D2011 (64bit)Win7(64bit) Civil3D2012 (64bit)Win7(64bit) Map3D2012 (64bit)
I have tried this with:
SDFSHP
View 9 Replies
ADVERTISEMENT
Dec 18, 2013
I am trying to create islands of surface by multiple enclosed polylines as boundaries.
Each enclosed polyline has several 3d lines as drawing objects.
After creating the surface from the 3d lines I use "Select similar" to select all boundaries(enclose polylines) and add them as boundaries using the "Show" option.
However, it is not working and I do not see the islands of a surface.
View 2 Replies
View Related
Feb 6, 2007
just test my code about create a stair 3D,still running the program and then appeared a display box,with said "Error analyzing internal islands",what meaning it said?.at attach file with "Error Analysing-1.jpg is the result that program.
View 1 Replies
View Related
Mar 9, 2013
I have a map. I would like to remove small islands without having to rub them all out manually (its a very big map).
I'm not too bothered about the criteria for selecting small islands - I would just like to specify an approximate threshold diameter or something.
The sea is one uniform color. And this color doesn't appear on land. Sort of like a noise removal filter, but I don't want the coastline of surviving islands to be smudged. I.e. islands that are not removed must not be touched and the removed islands must be removed completely.
I have tried selecting all the sea and then growing the selection to swamp small islands and then shrinking the selection again but this didn't work very well.
See attachment to clarify. I have colored islands that I would like to get rid of in red (very roughly). This is part of the full image. The actual image has just water round the boundary (no land touches the image edges) (Also there are some islands within lochs - ideally these would be selected also, but the majority are within the sea,)
View 5 Replies
View Related
Dec 9, 2012
I know that to merge different sections they have to be on the same layer / sublayer then you should cut them so they merge or rather it's not closed. That is exactly what I did and the little gap you see in the image, I can't get those two to merge together as one seamless object ?
View 8 Replies
View Related
Oct 31, 2012
C3d 2011 updated to all service packs
39 meg overlot design file
I have had this issue at least 3 times and twice on the same drawing. I create a surface from corridor and add several polylines and feature line as well as a boundary to the surface. Randomly it will lose all definition (breaklines and boundary) and i will have to "select similar" (and hope I get everything) and add all of my definition back.
It seems to only occur on large files and when my frequency is tight on curve and vertical curves.
View 4 Replies
View Related
Feb 9, 2005
I place and fully constrain two components in an assembly them mirror them. To my surprise, the mirror parts are not constrained. I grab them and move them anywhere I want. I closed without saving, reopened and grounded the mirrored components.
View 5 Replies
View Related
Apr 28, 2011
I have many short lwplines on separate layers. I need to join them by layer and then add fit or spline smoothing depending on if they are closed or open. The plines are produced automaticaly in code, so there is nothing else on the layers besides the pline. I am using this code to create a selection set of plines for each layer.
'''If sset Is Nothing Then Set sset = ThisDrawing.SelectionSets.Add("ss1")End Iflifiltertype(0) = 8v(0) = "jhl_11.00_begin"sset.Select acSelectionSetAll, , , lifiltertype, v
I think that I have to use SendCommand to do this. I would like to know the proper syntax to Join, Fit or Spline the plines using my selection set.
View 4 Replies
View Related
Mar 25, 2013
I have two halves of a rod that I want to join. They're both objects. What's the best way to fill in the gap between the two halves of the rod? It currently looks like this:
Using the LOFT command obviously just creates a surface between them, however, it doesn't become one model.
View 2 Replies
View Related
Oct 18, 2011
Joining lines into polylines in autocad 2007. Basically, I got stuck when joining several lines together using PEDIT and then Join. At the start, it was very smooth process with no drama. Then, I came across two polylines and wanted to join them together, it just did not work. It works most of the time. Why I can't join certain lines together or two polylines together. This is a 2D drawing CAD.
View 3 Replies
View Related
Mar 9, 2012
im after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
View 5 Replies
View Related
Oct 6, 2013
Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies
View Related
Jan 14, 2013
I have a VB program that auto updates the size of a door and frame assembly, and in turn, updates the shop drawings to reflect this change. I have a view on my shop drawing that I have drawn a sketch in. I start the sketch, add my dimensions, and I use 'Project Geometry' to project the edges of the actual part around the sketch to constrain my sketch and keep it in place. The problem is, as the program runs, and the door/frame changes height, the sketch loses it's dimensional references to the projected geometry. When I go back and reopen the drawing after running the program, all the dimensions that went to the projected geometry are gone.
Is there another way to anchor a sketch to a drawing view part instead of dimensioning to projected geometries? This doesn't seem to be working, and I've tried it every which way I can think of. Oddly enough, I have another sketch in a different view that is set up the same way, and it never misses a beat.
View 4 Replies
View Related
May 8, 2013
why when i try to plot a scale drawing my profile loses it scaled size and all texts and images are huge.
See attached.
Doc1.pdf
View 8 Replies
View Related
Apr 24, 2013
I have a compost pad and retention pond to design, I set my back Pad line to surface and then graded to elevation so the slope to the pond will have no cuts
I created a pond and left out the grading to surface on the up hill side towards the pad which will be paved one day. I now created two side feature lines to enclose the whole pad and graded by distance and slope.
My problem now is the two side and back seem to blend together as I attached the feature lines together but I can not figure out how to blend into the pond create as it has side slopes to EG and the front which must join to the side slope crest to enclose the pad to drain into the pond.
View 9 Replies
View Related
Mar 20, 2012
Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
View 4 Replies
View Related
Apr 26, 2011
Another little problem off the big list. Up until now i have been using Autocad Architecture 2009 but recently upgraded to 2012. For some reason though, my hatches are now no longer linking on wall corners like the attached drawing shows.
View 2 Replies
View Related
Feb 6, 2012
Im creating plans for a new entryway and so that I have some perspective on how it will all join together i'm also creating a 3d model of my entry idea. In order to move things around to get a better view of how im planning on building this entry, I joined studs together so that I can move things around in the viewport without having to select each object. I know I can grab all the objects at the same time to move but I was wondering IF there is a way to union objects so that they dont lose the lines between joining objects. For example if 2 - 2x8 studs are next to each other and I were to union them, then they would plot as a 4 x 8 instead of 2 - 2 x 8's OR is there a way to maintain lines after union?
View 2 Replies
View Related
Nov 8, 2012
I got a few boreholes in a test drawing and i want to join the various strata horizons (with 3d polys or something) to create surfaces.
Each borehole has several points organised in groups (input via the Borehole Importer Tool) I have gone into a SW isometric view but cannot snap to any of the points that are "below ground". I have got Node OSNAP on but can only select the topmost point every time
Whilst I could create surfaces based on the point groups this will give rise to geologically suspect surfaces so there is a bit of manual interpretation work needed.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Feb 13, 2012
I'm working with a SHP file that contains 56,000 polygons, but I want to export 18 of these that are relevant for my area. Is there an easy way to do this if I create a filter based on a unique data field?
View 1 Replies
View Related
Nov 26, 2012
when I join pdf's that I have exported from Inventor with ones exported from word and other programs. Both files are fine when seperate but once they are joined the other pages text becomes all distorted. This also happens when I join pdf's exported from Inventor with ones exported from AutoCAD.
Using: Autodesk Inventor 2013, Acrobat Pro 9 and AutoCAD 2012 on Windows 7.
View 1 Replies
View Related
Apr 16, 2013
I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
View 6 Replies
View Related
May 16, 2011
I'm new to VBA in AutoCAD I've played with Inventor VBA a bit, but the API appears to be drastically different.
I need to manipulate existing splines on a drawing by joining them together via VBA. To achieve this manually, the user would use the command SPLINEDIT and go from there. What is the equivalent, or how do I access the command in VBA?
View 2 Replies
View Related
Feb 11, 2013
I'm having a bit of trouble getting my polygon closed without changing the dimensions of the polygon.The drawing attached or at URL....
However I do not know the radius of the angles A, B and C. I know that all the lines have to be the dimensions marked.
Can Autocad automatically bend the angle say, at A without changing the dimensions in order to complete the polygon? I tried this URL.... but found it wasn't what I wanted.
View 4 Replies
View Related
Jul 13, 2007
how to join line or polylines with ellipse arcs or circle arcs and now.. I give up! Here is my problem: What I would like to draw can be compared with a pear: a succession of circle arcs ellipse arcs and maybe polylines. Once the profile done, I was planning to use REVOLVE or (EXTRUDE + FLLET) to finish my drawing... the problem is that I can't join 2 ellipse arcs from different ellipses (which means neither with a circle arc. How would you proceed to draw a pear?
PS: I'm using autoCAD 2006 z.54.10 version
View 7 Replies
View Related
Apr 18, 2012
I want to join a couple of lines with arcs. Unfortunately I have got a dxf created with CATIA. When I try to join them with pedit it does not work.
If I move the end point of the circle away and snap it back to the line, I can join them. Blending the Curves together is working (this shouldn't if the endpoints match, right?)
You can see it in this screenshot:
(On the left the circle and line are joined after I snapped them together, on the right they are connected using "Blend Curves" as you notice the tiny white connection)
So here it leads to my question:
Those lines seem not to be lying end to end together so I can join them. Is there a function to snap them together or to automatically ignore/fill such a little gap?
View 8 Replies
View Related
Mar 30, 2012
I used the "break" command to split some lines into segments, but now I can not join them again using PEDIT. They are all on the same elevation. What is preventing me from joining them? I've attached the file in question, I'm trying to join the red (metal layer) lines.
View 3 Replies
View Related
Jun 21, 2011
I have a drawing with 2 Data Connections: 1. Census Block SHP file from the Census Bureau and 2. an SDF file I created from GPS point locations. The question: Is there a way I can query the relationship between these 2 layers and have it report which census block each point is in?
View 9 Replies
View Related
Jul 16, 2013
For my job here I have a contoured map of a sand structure. I have converted that entire 2D map into a 3D map. Showing the elevation of the contours relative to the surface. I need to know how you can hatch or fill in with color the 3d polygons that are shaping the subsurface. When i try to hatch it, it works but it just pastes it at the surface at Z:0 and even if i bring that hatch down it won't form to the multidimensional polygon that i am trying to cover. Here is a pic of what I am trying to do.
The green / blue is the fault plane i have been able to plot as well as shade in using 3D Face, but the problem I run into for the RED contour lines is that they are arcs and when i use 3D Face it doesn't allow it to bend to conform with the arc shape.
View 1 Replies
View Related
Feb 28, 2011
I have this .sdf-file with 5 patches of forest. When i try to export this file to a .shp-file only 3 of the 5 polygons are exported. For the export i used the bulk copy command. why only 3 polygons are exported?
I have included a .dwg with polylines of the 5 patches. The .sdf file could not be attached.
View 2 Replies
View Related
Sep 20, 2012
On my file I have some polylines that are the streets. So, they look like rectangles and curves, etc. I am working also on a 3D Model, and what I have to do next is to extrude them. The problem is that those polylines are not polygons, and so, they are not solids when I extrude them. I tried to use the command BO but it says that the lines are not closed, and I checked with OSNAP and they are! Is there any way to convert those polylines into polygons?
View 2 Replies
View Related
