AutoCAD Map 3D :: How To Fill In Polygons In 3D Space
Jul 16, 2013
For my job here I have a contoured map of a sand structure. I have converted that entire 2D map into a 3D map. Showing the elevation of the contours relative to the surface. I need to know how you can hatch or fill in with color the 3d polygons that are shaping the subsurface. When i try to hatch it, it works but it just pastes it at the surface at Z:0 and even if i bring that hatch down it won't form to the multidimensional polygon that i am trying to cover. Here is a pic of what I am trying to do.
The green / blue is the fault plane i have been able to plot as well as shade in using 3D Face, but the problem I run into for the RED contour lines is that they are arcs and when i use 3D Face it doesn't allow it to bend to conform with the arc shape.
View 1 Replies
ADVERTISEMENT
Jun 16, 2012
I have a drawing (.dwg) file. It is having so many polygons created by polyline. I want to fill up those polygons by a color. How can I do the same in AutoCAD?
After that How can I generate .svg from .dwg?
View 4 Replies
View Related
Feb 23, 2013
I have Ai CS5, and I was wondering how can I use fill for a country without creating polygons.
For example I have a map in Ai and then I outline it in pen. Now how can I fill each state without having to trace each individual state in pen..because when I do this the state lines overlap and look bad. Like if I trace Washington and Oregon, the borders overlap unless I just trace the border line once in pen...but then I cannot fill the states because they are not separate polygons but a continuous line.How can I fill the states if they are not selectable polygons??
Or how can I make the states selectable polygons without having the borders overlap and look messy?
View 3 Replies
View Related
Aug 20, 2012
I am building some geometry and need to fill in this area, (ie fill hole with polygons then clean up with split polygon tool) but I am new to nurbs and am trying to do this model with nurbs. I usually use hull mode and move the hull down into the piece of geometry, but it won't move correctly that way.
So in the picture below i am trying to fill the red area and have it go into the green surface. The curvature of the green area makes it not line up correctly(ie fitting to the curvature of the green surface) when using the "moving hulls" approach. I was seeing if there was an easy way to go about this.
View 1 Replies
View Related
Dec 22, 2012
I am working on a project and figuring out a way to fill a concave space I have with a seperate solid that takes up the exact amount of space. I would like for this new solid to be its own part. I will post a picture so you can understand what I am reffering to. As you can see, there is a concave space in the middle of the design; what I am looking to do is fill this area with a type of foam, so I need to model something that fills all the spaces up to the top plane.
I have tried using the thicken/offset tool but it gives me errors on vertexs and such and I have tried many different selection variants. I did get the space to fill in but then ran into the problem of it being all one solid, not something I could take out and make a different part, which is what I am looking to do.
View 2 Replies
View Related
May 1, 2011
My drawings appear small in paper space than they do in model space. How do i get them to fill the paper space?
View 9 Replies
View Related
Oct 11, 2012
a)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
View 2 Replies
View Related
Feb 13, 2013
i have an image, roughly human shaped, rendered in hundreds of tiny circles. how can i make a separate outline of the whole image, so that i can then fill it with white? i want to be able to put the original image on a black BG but have the empty space between the circles show up as white.
View 5 Replies
View Related
Mar 5, 2014
I am just starting to learn Illustrator and am having an issue with filling an object. I am creating a box and when I fill that box the top acts as if there is a straight path even though there isn't. Also the right side of the box cuts only fills diagonally.One with the paths, two with the incomplete fill.
View 7 Replies
View Related
Jul 29, 2008
I am trying to fill the blank space (center) in this header with the existing background, how do i go about copying and pasting the red area into the blank area.
View 1 Replies
View Related
Aug 27, 2013
So I am trying to use "fill hole" for this empty space on my mesh but it isn't working. I know I can figure out another solution to this problem but I want to know why it won't work.
First of all, when I double click the edge around the hole it doesn't just select the hole, it selects a huge ring that goes around the whole head for some reason (I'm attaching a picture).
Then when I select the edges around the hole one by one and select "fill hole" nothing happens and I get a message at the bottom of the screen that says "polycloseborder2" (I am also including a pic of this).
View 2 Replies
View Related
Aug 16, 2011
In Coreldraw 12, I often use combine to end up with a one solid shape with many holes in it. Often I want to add a color inside one of the holes, much like a coloring book, but there is no shape there, it is just empty. What is the quickest way to create a solid that fills that hole exactly?
View 2 Replies
View Related
Feb 26, 2013
My question concenrs this photo: [URL] ... (this is my own photo by the way). Just so you know what I mean with 'sky' later on: you're looking at balconies.
I want to extend it on the left so I can make it a desktop wallpaper. However, the original photo does not extend far enough to allow me to just crop differently. How can I, using GIMP, fill up the new space so that it looks like the sky that's already there?
I have GIMP for Mac version 2.8.3.
View 5 Replies
View Related
Sep 7, 2013
Okay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
View 9 Replies
View Related
Feb 13, 2012
I'm working with a SHP file that contains 56,000 polygons, but I want to export 18 of these that are relevant for my area. Is there an easy way to do this if I create a filter based on a unique data field?
View 1 Replies
View Related
Jun 21, 2011
I have a drawing with 2 Data Connections: 1. Census Block SHP file from the Census Bureau and 2. an SDF file I created from GPS point locations. The question: Is there a way I can query the relationship between these 2 layers and have it report which census block each point is in?
View 9 Replies
View Related
Feb 28, 2011
I have this .sdf-file with 5 patches of forest. When i try to export this file to a .shp-file only 3 of the 5 polygons are exported. For the export i used the bulk copy command. why only 3 polygons are exported?
I have included a .dwg with polylines of the 5 patches. The .sdf file could not be attached.
View 2 Replies
View Related
Sep 20, 2012
On my file I have some polylines that are the streets. So, they look like rectangles and curves, etc. I am working also on a 3D Model, and what I have to do next is to extrude them. The problem is that those polylines are not polygons, and so, they are not solids when I extrude them. I tried to use the command BO but it says that the lines are not closed, and I checked with OSNAP and they are! Is there any way to convert those polylines into polygons?
View 2 Replies
View Related
Jun 20, 2012
When I plot to PDF, polygons plot with dark lines radiating from points along it's boundary, (see attached). If plotted correctly, the polygons should have a uniform appearance. What I have learned so far:
It only happens with transparency turned down in the style.I tried several methods including Adobe, DWG to PDF, PDF Report Writer, and Vadim PDF Writer.It was plotted from a different machine, same result.It was plotted by a different user, same result.It happens with other drawings.It also happens with solid hatches, but does not seem to be as bad.It does plot to the plotter correctly, at least!
View 3 Replies
View Related
Apr 17, 2012
Is there a way of trimming an SDF or SHP file with multiple polygons within a boundary buffer zone, but keep the entire of all of the crossing polygons.
I have managed to create a feature overlay for the trimming selection but the 'Union' command creates a new layer with all of both SDF files I'm comparing, not just the ones within the buffer zone.
View 8 Replies
View Related
Sep 26, 2003
Is it possible to offset multiple polygons collectively, at a predifined distance to offset and towards the center of the polygons?
View 6 Replies
View Related
Jan 25, 2013
There are two polygon topologies in the dwg attached. The 'Parcels' topology is a source while the 'RoW' topology represents an overlay topology. Both are reported correct and complete, nevertheless an intersection overlay operation
does not show the expected result. Instead, a rather painful error message comes up: Can't create polygons.Some links could be lost. Frankly, I have never known any of the messages before...
Ironically, this sample is a part of a greater drawing and the rest of the topologies work just fine.
View 5 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Feb 1, 2012
after discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
View 2 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
