Loading Bar Tutorial requires the Script Fu Filter. The Gimp download I have does not have this feature. How do I apply the Script Fu to the Gimp download that I have in my computer? Gimp 2.8
View 1 RepliesI am using gimp 2 to make a cartoon/rotoscope video. I used a separate program to remove each individual frame (2400+ frames) from a video as still images that can then be edited in Gimp. What I do is open the image, add two filters, then I save the image. The problem is repeating this over and over for each frame is getting to be very cumbersome and annoying. Is there a way to have the filter apply themselves automatically each time I open a new image? It would make things a lot easier and it would make the process go by much faster. It's annoying having to choose the filters from the drop down list every single time, especially when i keep applying the same 2 filters with the same exact settings every time. The same goes for the size of the image. Is it possible to just set gimp to a certain size and have it open at that same size every single time? It keeps asking me what size I want every time I open a new file. Gimp does remember the last size I typed in, but it still asks me to confirm it every single time i click new.
View 14 Replies View RelatedI have an image I am trying to create that I want to fade from right to left. In other words, I want the right side of the image to be full clarity, color, etc., and have it generally fade to almost gone by the time it gets to the left edge. Think of it as a gradient for an image.
Any way to do that with Gimp?
I found a blur tool. If I cannot do this with some kind of gradient tool, is there a "fade" tool?
I'm, using GimpShop (downloaded two days ago) on Windows 7. I've created a text layer and tried setting the font to Webdings, but the font doesn't get applied. Other fonts seem to work fine, but although Webdings appears in my drop-down of available fonts, GS doesn't seem to know about it.
View 5 Replies View RelatedBasically what I'm wanting to do is curve the text around the image...which I already know how to do...but have the texture and color of the image its around be applied to the text. I've included the file.
View 6 Replies View RelatedI want to apply curve to number of images using script-fu in Gimp.
View 1 Replies View RelatedI am having a problem with my Text to Path, specifically, I want to apply a gradient to my text, however when I make my path and select my text, the outline only appears over part of my text and thus I am not able to apply the gradient to the entire block.
Edit:
It seems like there is a character limit for this type of text, because I added some characters and it shrunk my selected area further.
I was just wondering if there is any way to effectively apply a normal map to a texture in gimp?
View 2 Replies View RelatedIs there any way I can type in text, and put it in the same place in each layer without having to go to each individual layer and putting it in?
View 4 Replies View RelatedWhen I create a curve to apply to an image, GIMP gives me only two choices: a freehand curve and a smooth curve. I need to apply a stepping curve (piecewise flat) and I am out of luck because there is no such option.
View 12 Replies View RelatedI'd like to know how to apply a "filter" to a bunch of images. By "filter" i mean a grid for sharing image in equals parts. How to be able to locate elements in a image. And to "apply" this grid to all the images of a directory even by script-fu if necessary.
View 2 Replies View RelatedWhen useing my old favorite graphic software MS Picture-It i often need to apply overall or border transparencies to many patches. Since im enjoying the pleasures of GIMPs select definitions which absolutely cause no distortions im often thinking - this be the only missing thing. Am i correct or do such functions like previewable halfways restoring of the previous look plus border fading indeed already exist in the new GIMP?
View 10 Replies View Relatedi've got the latest version of gimp and ufraw.
i have a folder with about 100 jpg files in it that i want to apply a general brightness contrast setting to.
Using the main interface to do each one I would need to go to Tools > Colour > Brightness Contrast and set a Brightness value of 16 and leave the contrast at 0
What i would like to do obvious is to run a batch command to do this operation on all files in a folder
I've tried guessing at a few command lines to do it but all have failed and basically how to do it.
I'm an infrequent and relatively unskilled GIMP user. I have used drop shadow in the past, and have been using it this afternoon with no problem until I started working on one image where I can't seem to apply the drop shadow to some text. I've got a 3-layer image, a background, a smaller image on a separate layer, and a text layer. Whenever I try to apply drop shadow to the text layer or the smaller image layer, it applies it to the background. I've tried everything I can think of...deleting and recreating the text layer, changing the "level" of the layer, closing then reopening the image...closing and restarting GIMP.. I select the text layer, click "Filter > Light and Shadow > Drop Shadow", and apply and it always applies it to the background.
View 1 Replies View RelatedI would like to apply a gradient inside closed path with black at the outside transitioning to white at the center. I
View 2 Replies View RelatedWhen I am editing text, GIMP will no longer apply italic nor bold effects. (Underline works though.)
I just upgraded from 2.8(.2?) to 2.8.6, and now I have this problem. I also just upgraded from Win XP to WIn 7 and upgraded from 32-bit to 64-bit, so I don't know if that is a factor.
I have files I created with the last version of GIMP that I can open and see the text properly formatted, but if I adjust the text the formatting disappears and WILL NOT come back.
GIMP won't print anymore either. My printer is set up correctly and I can print from other programs, but when I print from GIMP, it LOOKS like it went through, but the printer fails to do anything. I wind up having to tell GIMP to print to the microsoft xps writer (which DOES work) and then open the xps file I just made and have windows print it.
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
Is there a relatively simple, automated tool in gimp to apply one picture's environment lighting properties to another picture?
So for example if i cut out an object from one picture that has pretty warm lighting environment, and put it in a cold light background it will look pretty out of place obviously, and this is what I would like to resolve.
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
I would like to apply my own texture to the model i've done into 3ds max 2012, but I only know how to apply a texture from 3ds max... I have looking for tutorials, but they do not speak of how to apply a texture witch is not in a library, or, at least, how to create your own library..
View 2 Replies View RelatedI have a shade in a photo I want to duplicate in another. One post I found somewhere said to use the Info Window, hold mouse over spot you want to duplicate, and get the RGB numbers. Then Use the Channel Mixer and apply the numbers.
Problem is, the RGB colors from the Info Window are not presented in percentage of RGB, whereas the Channel Mixer uses percentages.
So, for example, my RGB may be 239/123/57. I can't figure out how to apply that. I tried dividing it to get a %. IN the above example, I would divide 239 by 255, and use that as the % for red. But that doesn't come close.
Am new to CS5 and I discovered something quite accidently. In Essentials under styles I learned of these little boxes with dots around them and you could drag that over to your picture and a nice screen would appear over your photograph--much like the comic book effect if you did sketch and stamp and sketch and half tone, but this was an already made screen.
I went down the styles looking for how those dots formed into a screen where it would lay over your entire photograph. I'm not sure how I was able to get that effect, but any of those boxes I clicked on would have that screen with different sized dots. How do you do that with some skill?
As I load photos into the video track, some of them allow me to apply panning and zooming (either auto p&z or customized), and others don't allow it.
For about half my images, the auto p&z is grayed out, and on the Photo Options panel, the P&Z option is gray and the radio button can't be activated.
For both images that work and images that don't work, they are all .tif files of varying sizes. I can't see any logic in why some images allow P&Z and others don't. I'll drag and drop an image onto the video track, and if the P&Z is grayed out, I'll delete it, drag and drop another image, and boom, no problems.
P&Z is active.What's the problem?
I am presently taking the The LAB Frontier course by Dan Margulis at Kelby Training and I am having difficulty with the Apply Image command working the way Dan said it would.
I am using CS3 on an PC.
Dan makes extensive use of this command in sharpening and other functions as follows:
Be in LAB color mode.
Start with a Background layer and duplicate.
Oversharpen Layer 1.
Have Layer 1 selected and go to Apply Image.
Apply the lower layer Lightness channel to the top layer reducing opacity to 50%.
CHANGE THE MODE TO DARKEN. This is my problem as Darken is not an available choice.
I have tried this on two different PCs with the same unfavorable result. why Darken mode is not available to me?
Is there a tuto on how to apply 2 materials to the same object, not creating sub-objects..but to the same object, so i can make one material get some transparency and the other one is fully visible under the other one.
View 4 Replies View RelatedCan you apply a jpg to the side of a 3-D box in AutoCAD? I think I remember doing this with Rhinoceros before, but unfortunately I don't have access to that program right now.
View 4 Replies View RelatedI was having trouble with _copyclip/_pasteclip and I found a link at Autodesk with a hotfix, which I downloaded. It has these instructions:
"However, drawings that were previously saved in these formats from AutoCAD 2007 will continue to have the problem unless they are resaved with the hotfix applied"
How do I apply the hotfix?
I recently starting using 4.2, first time using any Lightroom application, and I found how to set the watermarks but no way to actually apply them to my photos.
View 1 Replies View RelatedI'm using CS4 photoshop on my iMac 2008. When I try to apply image adjustments like 'posterize' or 'Brightness/Contrast' or 'Levels' to my image, I can adjust the settings in each dialog box, and I see the changes on my image because the 'Preview' box is checked. But when I click 'OK', the image reverts to its original and no changes are applied to the image.
I started out by importing a .jpg into photoshop. I've tried working on this .jpg, and I've also converted to Photoshop file format .psd, and still the same problem occurs. The original image had colour, but I converted it to grayscale. I also tried not converting to grayscale, and still the same problem. I am trying to make the image high contrast, with only black and white (no grey).
The same problem also occurs when I apply my adjustments on adjustment layers. Here I am able to modify each adjustment layer. The image changes and looks the way I want. But when I go to save the image, no matter what format I save as (.jpg, .psd, or .tif) the resulting image has none of the adjustments. It's still the original.
how to apply UCR (Under Color Removal) to my Photoshop file? I will then be importing to a page make up program and making a print PDF for Newsprint?
View 5 Replies View Related i edit lots of software video tutorials inside Photoshop CS6 and overlay the videos with lots of red circles and keyboard keys. All these overlays need a short fade-in and fade-out. How can i apply these fade-ins and fade-outs more efficiently?
- If have to drag every single fade-in and every single fade-out to every single object, these are two actions per object. I believe there is no keyboard command for this and also i cannot create my own keyboard command here.
- Often i *copy* an object with Ctrl-J which already *has* the fade-in and fade-out. But the newly *copied object* does *not* sport the fade-in and fade-out; so i have to apply those manually again.
Is there any way to speed up the procedure of applying transitions? (Bulk-apply transitions? Keyboard ways?)I already tried to activate the special time-frame keyboard commands. (applying transitions). What's more, with special time-frame keyboard commands active, the arrow keys get new tasks then; but i need the arrow keys for *regular* keyboard commands in connection with the move tool (to precisely move the overlay objects to their desired position).
If you know any *advanced* tutorials on video in Photoshop CS6 (written or video), i would be interested. I am very familiar with general Photoshop including general video there. I don't need any introduction.
I have also tried to do my tasks in Premiere Pro CS6, but found it a bit overwhelming and went back to edit the video tuts in Photoshop. Even though after some getting-used-to-it, Premiere might be better for me. I *do* have to import lots of smart-objects and vector-objects with transparency from Photoshop all the time, and Photoshop is my natural habitat.