basically I have a Genius MaxFire G-12U Vibration joypad controller, I wanted to map to certain actions and plug-in calls, but unfortunately this appears at the status of the device in "Configure Input Device" menu:
When the actions have been mapped to the different buttons, and after GIMP has been reset, the actions do not happen after pressing the associated buttons.
GIMP website did not show an entry for such menu.
Using GIMP 2.6.12, Windows Vista 32 bit, 4 core Intel processor.
even on gigantic images I seem to get this error EVERY TIME NOW! it doesn't matter what image and I DO NOT know what this 'input texture' that the error is talking about! there is NO option for an input texture!
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
Almost all of the common shortcut keys stop working when input language is set to Māori. eg. ctrl-n, v, b pretty much everything apart from ctrl, alt and space.
One minute it was working, and then suddenly I can not use the "down arrow" to access the additional dynamic input options. It must be a profile setting, because it works in all my other profiles.
I`m trying to use max with DirectX 10. Dunno if i should or not but here`s the problem, there`s a tick box in the Viewport Config options for DirectX10 that says `Display All Triangle Edges`. Obvious I uncheck that because i don`t to see wireframe spaghetti. However it looks exactly the same, the wireframe triangle edges are still there. How else can I get rid of them as wireframe performace is actually a little better but useless because all of the extra edges visible.
Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 11 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.
I recently bought a graphics tablet. Sometimes it works perfectly, and sometimes it doesn't do pressure sensitivity. I've narrowed it down to a single thing. This window here:
When it works, the Stylus is selected, when it doesn't work, the Core Pointer is selected. So how can I switch the currently selected one? Clicking doesn't work, there's no button in the configure input device dialog.
Things I've tried: - Plugging in the tablet before starting gimp - Plugging in the tablet after starting gimp - Rebooting (this seems to work, for the first time I open gimp after a reboot)
No matter what I do, it seems mostly random as to which is selected.
Just installed Elements 9 from old PC to a new one which runs with windows 8.1. Elements Organizer does not work. Message: DirectX could not be initialized. Download of directx 11.2 however still does not work.
The problem occurs since the GIMP requires GTK+ version >= 2.24.7 (Around November 25).
Currently I have to date the latest versions from Git of babl, gegl and GIMP. Gtk +-2.24.8, glib-2.31.2, pango-1.29.5.In Edit > Preferences > Input Devices > Configure Extended Input Devices only shows "Core Pointer". Do not show my mouse or my Genius tablet, which before the version I had mentioned they appeared and everything worked.
In Gimp 2.6 everything works tooI tried deleting the ~/.Gimp-2.7/ folder but the new generated "device.rc" file only shows "Core Pointer".My distribution is Kubuntu Oneiric 11.10 64bit.xserver-common, xserver-xorg-core = 1.10.4
So I recently got my graphics tablet and have been playing around with it on GIMP, getting the eraser and pressure sensored stylus configured. But I'm having a weird issue- the two side buttons on my stylus already have inputs from GIMP (that being pan and image menu), regardless of what I select for it on the control panel's 'Bamboo Preferences'. I'm not sure how to change it after looking around into the programs preferences window, including 'Input Devices'. Uh, I've checked that my drivers are up to date and I have Windows 7 Home Premium x64 on a crappy laptop, if that means anything... This is really irritating me as the input GIMP determines and the ones I choose from the control panel happen simultaneously and I just want my own inputs.
I recently blew away my Ubuntu 10.10 and installed 11.04. Not liking Unity, I figured I would try Gnome 3. After getting Gnome 3 set up, I downloaded babl,gegl, and gimp tarballs and proceeded to install all sorts of dependencies(required and many optional ones) via apt-get packages.
I then compiled babl(0.1.4), gegl(0.1.6), glib(2.29.8) gtk+(2.24.5) and finally gimp 2.7.3(note that all the above are from the gimp.org ftp site. Prior to compiling gtk+, gimp failed on the make with some really strange errors, which is why I compiled my own copy. Also note, ALL of the above were compile into a different prefix with :
./configure --prefix=/home/joefrazierjr/opt
Once I finally got GIMP compiled, I can see my tablet in the input devices, but they are greyed out along with all of the below:
SynPS/2 Synaptics TouchPad Virtual core XTEST Pointer Wacom Bamboo Fun 6x8 cursor Wacom Bamboo Fun 6x8 eraser Wacom Bamboo Fun 6x8 pad Wacom Bamboo Fun 6x8 stylus
The ONLY thing that is NOT greyed out is Core Pointer.
The main reason I complied is because for whatever reason,the PPA package available does not also install Python(but does let the tablet work).
Note that I am comfortable with "using" the shell, but am a power user in linux, so assume that I know nothing about linux in any replies. Also, if I need to remove, any of the compiled code and recompile, I assume running "make clean"will fix it up correctly?
Note, my Bamboo Fun works fine in MyPaint(with pressure sensitivity,etc), so the issue is with either GIMP compile itself or GTK appsin general(If MyPaint is GTK or not). Also, I still have the build folders, so if I need to link to any of the config.log files, I will put on my dropbox.
I am having a serious problem with gimp on my mackbook pro, running os x mavericks, but the problem also existed in mountain lion.
When any dialog box appears where there is a text box for keyboard input, the keystrokes go to the background gimp main window instead of the foreground dialog box. So it's impossible, for example, to type in a new file name on a save as dialog box. Another example is it's impossible to type in an image width in the scale image dialog box. This is true of all the dialog boxes I've checked.
This makes gimp practically unusable on a mac, and is therefore a serious problem. I know of a workaround that involves typing in data into the mac text editor and pasting it into gimp dialog boxes, but that's ugly and unacceptable.
My need is to create up to 50 points from the same origin in a three dimensional Cartesian coordinate system but I’d also like to have a labels for each point that show up in the feature tree.
Are there Inventor 2013 plugin (i.e., add-on, 3rd party, AP) to convert a list 3D Cartesian coordinate system locations (i.e., points) to Inventor to work points(x, y, z)?
I found that I cannot create 3D points in the assembly. Is this correct? I did find that an Inventor part may be used to create a 3D sketch that creates points in 3D space. In the past few days, I found two ways to create 3D points within a iPRT; the batch way uses an Excel file but it then does not allow me to name the points in the feature tree. The second way is to create them one at a time but that take way too much time.
I saw another thread on this, but it went unanswered, so I am going to ask it with some better information.I installed inventor pro 2012, and it was working fine for a few days, but it now is missing the input boxes for the Precise Input window. URL....
When I upgraded to 2.8, UFRaw didn't come along for the ride.
I tried installing UFRaw into the GIMP2.8 folder, but I get an error message saying "The program can't start because libgdk-win32-2.0-0.dll is missing from your computer. Try reinstalling the program to fix this problem.
I have a Genius 8x6 tablet, and it worked fine with 2.6. 2.8 doesn't register the pressure on my tablet. I checked another thread about 2.8 not registering tablets, and it said to configure input devices and change the pen setting. I don't have a pen option on the devices list. All that shows up is is the core pointer/ mouse.
I'm trying to put a watermark on an image using the opacity bar for the text. However, the text remains 100% opaque until I get down to 50% opacity, at which point it completely disappears. I thought there may be something wrong with the text layer (not sure if that's the right term.. layers and paths, etc. are all new to me), so I tried it with other tools such as the eraser and the same problem occurs. Is there a bug in my program or am I just really new at this?
So I've finally upgraded to GIMP 2.8, finding that .abr was native. I've downloaded thousands of brushes, only a hundred work, MAYBE. I'm confused because even the brushes that are not in .abr form do not work. Also, sometimes if I try to fix the brushes by uninstalling and reinstalling there will be random ones that work and then old ones disappear?
I've saved a file with paths as .xcf and I can call up the paths again in the paths dockable dialogue. But I can't actually see the anchors or edit the paths. How can I continue working on a path I was working on before?
i have just installed GIMP 2.8 on to my computer running UBUNTU 12.04, everything seemed to go ok with it opening up, but when i tried to select a tool, the tool icons go through the motions of selection, but non of the tools will work.
After pasting in a PNG, and it's made into a Floating Selection layer, she wanted to scale it down using the Scale tool. So she clicked and dragged till she got the right size, but upon clicking on Scale (in the little dialog that pops up with the Scale tool), the dialog box vanishe ... and the layer went back to its original size. She tried multiple times and got the same problem.
I even got her to click on "Cancel" rather than Scale in case it was a traslation error, like the translator mixed up the Scale and Cancel buttons, but nope.
Been using GIMP (2. for a while now, it's been nearly a year on this PC (Windows 7 64 bit, relatively recent hardware, 8 Gb of RAM, etc.) and it's worked smoothly up until a couple of days ago when it stopped working as intended all of a sudden for some reason.
Whether I use my Wacom tablet or the mouse none of the tools that normally allow you to draw (pencil, brush, airbrush, etc.) work anymore (cropping, distorting the image and the likes work fine though), doesn't matter if it's a brand new document or an old file. The funny thing is that when I go to the "Edit" menu it'll allow me to rollback and undo whatever I did with the aforementioned tools, even though there's no trace of it on the empty canvas itself.I tried to uninstall and install the software back but it didn't do the trick.
when i open gimp, the file formats listed at the open file dialog includes .eps but when i open any .eps file an error appear that says "could not interpret postscript file".
Having a problem in Gimp 2.6.11 on Windows 7 x64 system. You can watch the video, linked below, but the basics are: I do a selection, scale the selection, make a new layer out of the floating selection result. I try to run a RGB Noise filter on the new layer and no preview shows in the filter dialog or it doesn't show correctly. If I anchor the floating selection into the original layer, instead of making a new layer out of it, the preview shows correctly. Is this a bug... or?
I've got a real problem here with the Script-fu Gradient Overlay. Every time I try to use it and click on any of the buttons - see screenshot for full list - it shuts Gimp down. There's no warnings, Gimp just suddenly vanishes and if anything is being worked on then all the changes are lost.
When I try to use the smudge tool in gimp (2.6.2). I click on it and I try to smudge the image. But gimp seems to ignore the tool. So I decided to play with the Opacity, Rate and even the scale. No luck.
So then I thought, ok maybe the changes are to small for me to see. So I decided to zoom all the way in and try the smudge tool. No change at all.
The odd thing is it is a single layer image. I just tried an experiment, I opened the photo I wanted to smudge with clicked on the tool and tried blending the area. Then I closed it, it didn't ask me if i wanted to save the "changes" I just made.
The smudge tool does not have an circular with an line across it saying I cant use it. Here is the image I am trying to fix up .
This tool lets you extract foreground from the active layer, using the SIOX method. To create a selection, set roughly foreground you want to extract. Select as little of the background as possible. As soon as you're finished (the selection is closed) the rest of the image goes dark. Now draw the line trough the foreground, going through all colours that will be used for extraction. Then after releasing the mouse-button, only the actual foreground is selected.
