I saw another thread on this, but it went unanswered, so I am going to ask it with some better information.I installed inventor pro 2012, and it was working fine for a few days, but it now is missing the input boxes for the Precise Input window. URL....
View 5 RepliesOne of my students has moved their precise input toolbar. How do I bring it back?
View 5 Replies View RelatedIn V2013 i make a 3D sketch and choose spline. I don't see the precise input toolbar and don't know how to bring it.
View 6 Replies View RelatedI am using Autodesk Inventor 2013 and for some reason I cannot access the precise input option. I can find the icon in the draw box, but it is grayed out and not clickable.
View 9 Replies View RelatedMy need is to create up to 50 points from the same origin in a three dimensional Cartesian coordinate system but I’d also like to have a labels for each point that show up in the feature tree.
Are there Inventor 2013 plugin (i.e., add-on, 3rd party, AP) to convert a list 3D Cartesian coordinate system locations (i.e., points) to Inventor to work points(x, y, z)?
I found that I cannot create 3D points in the assembly. Is this correct? I did find that an Inventor part may be used to create a 3D sketch that creates points in 3D space. In the past few days, I found two ways to create 3D points within a iPRT; the batch way uses an Excel file but it then does not allow me to name the points in the feature tree. The second way is to create them one at a time but that take way too much time.
Since a few versions (I have Illustrator CC), my cursor in Illustrator input fields flashes extremely fast when i drag the cursor over such field. This could be a regular text input field or anything similar where you can type in something or adjust a value by clicking and dragging.
What happens is that the cursor changes to the Illustrator cursor and then back to the Windows arrow cursor in an extremely fast manner. It happens so fast, that it completely slows down the mouse interaction and the cursor movement lags behind my interaction.
I have Win 7 x64 with the newest display drivers. This problem occurs only in Illustrator and Flash.
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
View 4 Replies View RelatedI have made an animation that after it completes, it displays an iFrame which has some input fields. The input fields behave great on a laptop pc or mac but when I use an Apple iPad, the cursor positions are way off outside of the input fields as I type.
Here is the website page: URL...Here I have the same iframe, one inside of edge and the other outside of edge. Both work fine on a pc or mac but if you try to use an Ipad, you will see that the edge one shows the input field cursor down and outside of the input field.
You can see for yourself, I have set this up for you to test and see this error.The animate oam file is: URL....
Here is a link to the edge files, the .an and java files files: URL.....
when i used to use the polyline edit (double click a polyline) the options came up on the tooltip but now i just get them in the command line
is it me or have i unticked a box somewhere?
I can't seem to turn on the dynamic input. I followed the advice to go through Tools-Application Options - Sketch Tab, but then it references a 'Settings' box that doesn't seem to exist (see the attached screen shot). Is there some other option that needs to be turned on?
View 1 Replies View RelatedI need to put in the polar equation r=e^theta. Is this even possible in autodesk? How can I do it? Should I spline through points instead?
View 4 Replies View RelatedI have almost got my ilogic part working the way I want it. I have to go into the parameters and choose from a Multi-Value list.
Is there a way in ilogic to get a input box to come up when I place my part in an assembly (like an ipart)?
how to input square root in a dimension.
I have tried sqrt(5)
IV 2014 returns "expected [in] but found [ul^0.500]
M6700, Nvidia K3000M, 32GB, 512 SSD
Win 7 Ultimate 64
Inventor 2014
Is there a way in iLogic to set the input list box width?
View 7 Replies View RelatedI am currently running Inventor 2009 64-bit SP2 and periodically (and only recently), I have had the problem of my keyboard keys not displaying what I am typing. This is only affecting Inventor and no other program to my knowledge. To make matters worse, it happens absolutely randomly. In fact, it happened just 4 minutes ago, which prompted this post! I was typing some words out and in the middle of the word, it changed what the inputted keys were. To give an example, the letter P comes in as L. The letter S, comes in as the letter G. The letter M comes in as semicolon. Catch my drift? At first I thought it changed to a Dvorak key setting, but even if that were the case (which it is not), why would it do it randomly?
View 2 Replies View RelatedWhen I create a rectangular box in Autodesk Inventor 2008, shell it, and create a new sketch on any face and press E I expect to be greeted with the extrusion options. This does not happen, and a command alias input dialog appears in the status bar.
I really want to turn this off, since it has happened on other occasions as well. Since there's no other way to get to the extrusion feature, it completely halts my work.
Usually when I don't know what a feature is for and I'm not attempting to use it I expect to not see it- especially when I perform actions that don't usually bring it up. I'm not sure why the behavior has been put there. Hopefully it's not put into later versions (I've seen 2010 complaints as well) so someday an upgrade will remove the annoyance.
I'm having a real problem with a part I'm trying to develop:
I'm attempting to have a single timber part that has several draft face features within it, so I can control the bevelsa on the part with iLogic at a later date. The problem I'm having is that when the "running bevel" changes direction it throws out the bevels on the ends. (I've attached the file, it's very difficult to put into words.
But basically: When the running bevel is "forward" the end bevel measures 20degrees (as it should) When I flip the running bevel to "backwards" the same end bevel now measure 19.7degrees while the input parameter still says 20.
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
Currently have an iLogic rule in my drawing template that base on user input brings up the Drawing View dialog box (as though you click on base view). I want to know if there is some coding I can do to control or handle what happens if the user clicks the cancel command inside this dialog box. Possibly show a message box. Or even run another rule after the cancel button has been clicked?
View 1 Replies View RelatedActually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
The second line of fields for text are missing for one half of the welding symbols - See attached picture. my paint scrawling.
View 2 Replies View RelatedNo matter whether Dynamic Input is on or off, input needs to be @X,Y in order to draw with relative coordinates.
Many students have installed recently AutoCAD LT 2012 Educational version and this problem appears only with one of them. Dyn Input Settings seems to be equal on all computers.
How to input mdb files thru ogr provider but can't seem to find it anywhere. I had my computer setup to do this but now it doesn't work and have to redo this again. Is the ogr provider the best way to input mdb files (ESRI) personal geodatabase file. Have 2011 civil 3d running windows xp.
View 3 Replies View RelatedI am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI used to be able to open up 'Windows Explorer'-style boxes to select files and type in file names to save. Now, I must have toggled some option to only do this through the keyboard and mouse.
View 3 Replies View RelatedI'm writing because I need to disable the dynamic input in AutoCAD.
It's irritating to me, because I'm more used to a much older version of AutoCAD.
Upon searching through the internet I found a thread here that says that I have to set DYNMODE to "0" to turn off the dynamic input. Alas, I have no clue as to at which subfolder of the registry this variable should be.
dynamic input.jpg
A while ago my dynamic input method went from aligned to some sort of midpoint angled method. Not even really sure. What this is / how to change the input method?
Attached is a shoulder sub I am trying to complete.
My sticking point is defining the "slope", which I want to be an input parameter, from P6 to P7.
L7 needs to tie to this slope while maintaining the superelevation.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
I'm using AutoCAD 2012LT and have somehow lost the text command input box, that shows what commands I am typing in, at the bottom of the screen.
I am using the program in Classic View rather than Ribbon view. I've been unable to log into the subscription help center due to the organisation I work for not being on subscription.
I want to be able to see angles in Dynamic Input with the base line set where I need it to be.
In the red is where AC puts the baseline in the DYN command.
Is there a way for me to "tilt" the baseline so i can use it in ANY angle, like in the blue?
* I am referring to the baseline as where 0 degrees begins*
I need to change the radial acceleration value in Civil3d when designing for super elevated bends to shorten the transition of a track. I can calculate the transition manually but is there a way i can input this data in the design criteria while carrying out the alignment geometry design in Civil 3d.
View 1 Replies View Related