I need to change the radial acceleration value in Civil3d when designing for super elevated bends to shorten the transition of a track. I can calculate the transition manually but is there a way i can input this data in the design criteria while carrying out the alignment geometry design in Civil 3d.
View 1 RepliesI had an issue[URL] with draping that turning off hardware acceleration sorted out.
It seems many issues are overcome by turning HA off or turning it on or toggling the setting so the question is what is HA for and why is it so problematic in Civil 3D?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
how to get C3D 2014 to label a radial bearing? I guess I could dream up an expression using the start Northing and Easting and the Center Northing and Easting, then converting from decimal to DMS
View 9 Replies View RelatedI dont have it in my custom shapes and was wondering if i would be able to download it from some where.... anybody know where? need the radial blur like in this background.
View 7 Replies View RelatedAny way to add a (R) to the Bearing dislpay, to indicate a radial bearing, in a Line Table?? This would only apply to certain lines, not all of them. I can specify which line. That function does not need to be automatic.
View 9 Replies View Relatedwhy I get these unusual radial lines showing up in my plot preview. The drawing looks fine on the screen but when I go to plot I get hundreds of lines that converge to a point in my preview.
View 5 Replies View RelatedI am wanting to draw lines from gun setup to the back sight, and then from the gun to all the radial shots that were taken from that setup. I would like to do this as automatically as possible. (i.e. a bunch of radial lines from the gun to each individual shot from that setup).
Our raw files are in TDS format. I could do it manually by using the transparent command 'PN, but I would have to draw a line from the setup to the shots individually.
Otherwise, I could write a lisp that asks me for the setup pt number, and I could give it a range ot pt #'s and have it draw lines from the gun to each of the pts in the range. (that is, if 'PN works in lisp).
why a line drawn perpendicular to a spiral curve in C3D is not radial? If so, what is it perpendicular to? It can result in several feet of difference.
Also, labeling an alignment along a spiral using the automatic routines appears to run perpendicular (whatever that is - not radial).
Perhaps I'm not looking at the math right (its been awhile since spiral curves in college) but it seems to me that a curve of diminishing radius should be labeled radially. Is that not how C3D sees it?
The only other thing I can think is that C3D is running perpendicular to the small tangents or arcs that it puts in to approximate a spiral curve.
C3D - 2014, Sincpac Addon
I want it to be "Angle Right" instead of "Azimuth".
View 6 Replies View RelatedHow to get a tangent bearing or radial bearing to show up in the legal description writer? All I can get are their opposites. Is there some code that I can add that will swap their direction (say NE for a SW)?
The convention out here (OR/WA) is to show a radial bearing (from the PC to the radius point) or a tangent bearing (into the beginning of a curve) for any non-tangent curves. So far, I haven't been able to figure out how to do this automatically.
Also, any good guide or list of variables for using the Parcel Reporting for legal descriptions in c3d? I really want to know what ALL the different pieces of data are that I can use in the legal writer, and how to manipulate them.
My need is to create up to 50 points from the same origin in a three dimensional Cartesian coordinate system but I’d also like to have a labels for each point that show up in the feature tree.
Are there Inventor 2013 plugin (i.e., add-on, 3rd party, AP) to convert a list 3D Cartesian coordinate system locations (i.e., points) to Inventor to work points(x, y, z)?
I found that I cannot create 3D points in the assembly. Is this correct? I did find that an Inventor part may be used to create a 3D sketch that creates points in 3D space. In the past few days, I found two ways to create 3D points within a iPRT; the batch way uses an Excel file but it then does not allow me to name the points in the feature tree. The second way is to create them one at a time but that take way too much time.
I saw another thread on this, but it went unanswered, so I am going to ask it with some better information.I installed inventor pro 2012, and it was working fine for a few days, but it now is missing the input boxes for the Precise Input window. URL....
View 5 Replies View RelatedAttached is a shoulder sub I am trying to complete.
My sticking point is defining the "slope", which I want to be an input parameter, from P6 to P7.
L7 needs to tie to this slope while maintaining the superelevation.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
I want to use the "Profile Sample" program supplied with C3D to create an alignment and profile. I am creating the stations and elevations in LISP and want to send them to the "Profile" program. I have seen in a C# program the use of an Array to send the data. I would like to do the same. eg.
LISP - (profile_sample sta1 elev1 sta2 elev2 sta3 elev3 ...etc)
VB - What is the code to pass this data to the Profile Sample program?
I am VERY new to VB programming. I have trouble giving up LISP.
I want to try the point inverse report but I am stumped on how to get to this dialog box?
I type 'cogo' and get to a cogo traverse box but nothing shows up about inverse report.
Is there a non-ribbon method?
Im so green at the ribbon that I type "ribbon" but still cant find it.
I'm trying to use an expression for text height and everytime I enter the name of the expression I get "Invalid Input". Is there a trick to doing this?
I even changed a style that "HAD" allowed me to use an expression, to a number then tried to reenter the same expression name that was there and get "Invalid Input".
Civil 3D SP2.1
64 bit
windows 7
I just learned the input formats of points (like PENZD, PNEZD, etc.). I want to know the input format of Survey. Need information of input format of Survey.
View 9 Replies View RelatedI've been working in C3D for about 5 yrs now, and one thing that drives me absolutely nuts about it is how to get the correct layers to display when plotting different sheets out of the same drawing, regardless of the layer state of my model. I worked in Terramodel for about 5 years prior to coming back to AutoCAD and became spoiled by the ease with which layers displayed on different sheets in the same drawing. You assigned a layer state to the viewport and that viewport always plotted that way.
It didn't matter what layers were on or off, frozen or thawed in the model view, once you jumped over to the sheet it always looked the same once you set it up. In C3D I've tried viewport overrides, jumping into the viewport and setting the layers then saving the layer state... All sorts of different approaches, but I've never found anything that really works. My projects are typically small enough that I have all of my sheets in the same drawing but want different layer settings on different sheets.
I have the following 8 points of XYZ-coordinates:
Location SampleID X Y Z Depth Elevation FGACDC-SS01 FGACDC-SS01-S1 -77.055876 39.00845 314.5 0.5 315 FGACDC-SS01 FGACDC-SS01-S2 -77.055876 39.00845 297 18 315 FGACDC-SS02 FGACDC-SS02-S1 -77.055886 39.008643 319.5 0.5 320 FGACDC-SS02 FGACDC-SS02-S2 -77.055886 39.008643 302 18 320 FGACDC-SS03 FGACDC-SS03-S1 -77.056203 39.008736 311.5 0.5 312 FGACDC-SS03 FGACDC-SS03-S2 -77.056203 39.008736 294 18 312 FGACDC-SS04 FGACDC-SS04-S1 -77.056203 39.008491 304.5 0.5 305 FGACDC-SS04 FGACDC-SS04-S2 -77.056203 39.008491 287 18 305
These 8 points are for 4 sampling locations with 2 depths for each sampling location. I used AutoCAD 2012 a little bit before and I am new in using AutoCAD Civil 3D 2013. What are the key steps and tips of using the values of XYZ-coordinates listed the above-mentioned table to input manually into the AutoCAD Civil 3D 2013 program. Note: 4 sampling locations are in the 4 corners of a square lot and the 8 points should look like 8 corners of a box.
I've created a simple cutdown kerb in Subassembly Composer 2013. I can't add Point, Link or Shape Codes & get the error message " The code (Flange for example) is not a valid input parameter or variable.
View 1 Replies View RelatedIs there any way to allow user input in an expression for a profile label?
View 5 Replies View RelatedIs it possible to create subassembly from C3D Stock Subassemblies.dll programmatically using .NET? I need call procedure (Basic Lane for example), set all input parameters and create subassembly in drawing.
View 7 Replies View RelatedI have an irregular shaped polyline in civil 3d that needs to be 31.5 acres. It is currently 32.8 acres. Without manually rescaling this polyline over and over again in order to achieve a polyline that represents 31.5 acres, can Civil 3D automatically draw the polyline to represent 31.5 acres for me?
View 9 Replies View Relatedwhen trying to input the bearing in degrees minutes and seconds I have to input (for example) 89%%d49'38". how do i change it so i can input ddmmss?
View 5 Replies View RelatedI am receiving an invalid input message when trying to create a curve between two lines. My drawing units are set to architectural. The problem is summarized as follows:
1- In Lines/Curves menu, select curve between two lines.
2-Select first tangent
3- Select second tangent
4-Select radius option
5- Enter 8'6"
6- After entering the radius I receive an invalid input message.
7- But if I enter the radius as 102 (102 inches) the curve is created without any problem.
I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedI'm getting this error in the middle of launching Civil 3D2014 x64 hotfix1 from the uncustomized Civil 3D 2014 Imperial icon (see command history):
Loading AEC Base...
Loading AECC Base...
Loading AECC ETransmit...
Loading AEC Base Extended...
Loading AEC Core...
Loading AEC Application...
Loading AEC Project Base...
Loading AEC Base GUI...
Loading AEC Project UI...
Loading AEC Utilities...
Loading AEC Layer Manager...
[code]....
Civil 3D appears to run o.k., no error messages upon opening a drawing...
When I created my subassembly with subassembly composer, it's difficult to change the sequency of the input/output parameters. Do we have an easy way to do that, Like moving?
View 4 Replies View RelatedIs there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
View 4 Replies View Related1)the design acceleration tab in Inventor 2012 is missing, the problem is still persist eventhought i reformatted and reinstalled the product
2) In windows explorer, when i right click on the inventor assembly file, the dialog box doesn't appear the ''pack and go'' adn ''design assistant''