I have a Genius 8x6 tablet, and it worked fine with 2.6. 2.8 doesn't register the pressure on my tablet. I checked another thread about 2.8 not registering tablets, and it said to configure input devices and change the pen setting. I don't have a pen option on the devices list. All that shows up is is the core pointer/ mouse.
View 12 RepliesI am using GIMP 2.8, and the brush dynamics do not seem to work. Whenever I use Pressure/Opacity, no matter how hard or light I press, nothing happens to the opacity.
I tested my tablet's pressure sensitivity using the built in pressure test. Everything seems fine. It works fine with Photoshop CS2, but I want to use GIMP.
Everything seems fine when I use Speed/Size & Opacity.
Additional Information:
OS: Mac OSX 10.6.8 Snow Leopard
Tablet: Huion H690
GIMP: 2.8.2
I have Wacom Bamboo Fun with latest drivers, use Vista 64 and run PS in 64bit mode. I uninstalled CS3 before installing CS4. The tablet worked in CS3 as expected, but CS4 ignored pen pressure - it always worked like mouse - with maximum pressure. In order to fix this problem I uninstalled and reinstalled Wacom drivers and cleared PS preferences by starting PS with Alt-Ctrl-Shift. Now Photoshop ignores the tablet completely - the cursor won't move and I need to use mouse to navigate in Photoshop.
View 4 Replies View RelatedI recently bought a Gateway M280 tablet laptop, and it works great. The pen pressure works with the default painting programs, but for Photoshop (7) and Painter, the pen pressure won't work at all. Even after I toggle the brush settings.
View 2 Replies View RelatedI have a Wacom Intuos 3 tablet, photoshop CS6 and Windows 7. The pressure sensitivity of my tablet won't work anymore. Roughly, it said to uninstall my wacom driver, unplug the tablet, reboot, install driver, plug in the tablet and reset my preferences in photoshop. I've done this last night and it worked, I was thrilled but it was late, was exhausted,When I turned it back on and went in photoshop this morning it didn't work anymore, pressure sensitivity was gone again. I get this little warning in my brush settings when I try to put it on Pen Pressure or tilt or other setting that requires pressure sensitivity, The only way I can get it to work is with the process I mentioned (uninstalling driver, unplugging tablet, rebooting etc...) but I'd need to do this every time I shut down my computer and that's a bit of a pain..I've also tried installing different drivers, the latest one first, when that didn't work I tried older ones to see if it would make a difference to no avail.
View 11 Replies View RelatedI own a Wacom tablet and I've used it for about a year now.. and now that I mostly use my Laptop, I use the wacom tablet as a mouse pad (using the mouse that comes with it). I opened up photoshop today on my laptop and I was trying to erase some things using the brush command and it didn't work.. after an hour of panic and googleing I had the idea of using the pen.. which works.
I've deleted preferences, reset tools, and everything.. but its not working. No brush commands work (Clone, Brush, Eraser, etc.) but everything else will work.
I don't get it.. Is it something with pressure maybe?
Thats the only difference between mouse and pen.. pen adds pressure sensitivity.
I can't use the pen for pixel editing as well as I can use a mouse.
I just updated to GIMP 2.8, and my tablet -a digipro WP5540- does not work with GIMP unless it is in disabled mode under input devices. When "disabled", it works except with no pressure sensitivity. When "enabled", the tablet can be used to click on menu options and the brush will follow the tablet position at random intervals only when the cursor is not on the canvas.
View 1 Replies View RelatedI have been using bamboo fun with gimp(2.6 or older) for ages without any problems with either one. Today I finally managed to make it into the store and upgrade my tablet to bamboo pen and touch. Also found a new gimp version and decided to get that one as well. I uninstalled all old drivers and the old gimp before installing the new ones
So I got my pen tablet working and gimp 2.8 installed. Everything seemed to be just fine until I tried to add my tablet as an input devise. Gimp just does not show tablet on the list, it wont recognize it's pressure sensitivity or any similar things the tablet is supposed to do. I restarted my computer between installing the drivers and the latest gimp, I restarted after installing gimp. Heck, I've restarted my computer about a dozen times today and still nothing gimp wont find my tablet. I've deleted my old profile data from the .gimp2.6 folder in the uninstalling process so it cant be about that
I tried searching fixes and things that worked for 2.6 but none of those worked for me so here I am. I tried using both the latest drivers and the ones that came with the tablet but neither made gimp recognize the tablet that is working just fine with every other program in existence
I'm running win7
Recently I have been noticing that while I am drawing on gimp using my tablet at times the brushes start to freak out and just keep rotating constantly.
I cant make a straight line using a rectangle shaped brush. And this happens to all the brushes. It just makes everything look really messy.
My graphics tablet is Wacom CLT-470/K (pen) without buttons on tablet. But my pen have two buttons and i want to know, how to set up them. For example i want that when i tap first button, undo the last change occurred. Of course i can set in properties of tablet driver (then tap first button, ctrl+z occured), but GIMP (!) still understand that first button (near the pen tip) is right mouse button, and second is middle mouse button, ever after reload GIMP. In old version GIMP, like 2.2.17, gimp understand pen button in accordance to properties of tablet driver, but old verstion is too unstable.
View 1 Replies View RelatedAfter updating to GIMP2.8.4 I am seeing a constant problem with the canvas not updating after any change unless I move the cursor out of the image area. It starts updating immediately but if I move the cursor back it stops even if it hasn't finished redrawing. This is not just for image changes; the selection outline does not update either unless I move the cursor out of the image area! There's another problem with the selection outline - sometimes it just stops displaying, period, and I ave to use quick mask or save and close GIMP.
View 1 Replies View RelatedI had to restore my laptop to factory settings, which means I needed to re-install GIMP too. So I went to download GIMP on the site, and 2.8 was the only version there so I went for it. Installed my tablet too, with driver. GIMP recognizes the tablet, but whenever I try to draw, I get a semi see-through line, instead of a bold one - and there is no change in this when I change the pressure on the pen. When I used it before, it always changed the opacity of the brush in accordance with the pressure on the pen. But I don't know how to change this in GIMP now?
View 1 Replies View RelatedUsing:
TB-5300 Slimline Design Tablet
Windows 7 (32 and 64 bit, problem occurs on both)
The problem I am having is that the X-coordinate for my pen tablet is incorrect. The paint brush appears to the left of the screen and doesn't move as far left/right as my pen does. By moving the position of the drawing area I have found that pressure works correctly. Strangely, the position of the mouse when being controlled by the pen tablet is correct, it's just the paint brush which is wrong.
I can correct this problem by uninstalling the pen tablets drivers, but then the pressure sensitivity stops working.
This problem fixed itself for about a few days, but then came back without anything apparently having changed in that time.
It's occuring in both a 32 and 64 bit version of windows.
[URL]
tablet is good for sketching and mouse is good for pathing, but i cant use both at the same time. What can i do?I need to point out that disabling the pen doesn't work I need the pressure feature on...im using gimp 2.8 on windows 7 32bits, usng an acteck di-pen5500 tablet pen.
View 6 Replies View RelatedI'm trying to get the pressure levels for my tablet working right. I want it to increase hardness when I press harder, but instead hardness DECREASES. Is there a way to flip it around? The matrix just seems to be booleans, with only checkmarks or no checkmarks.
Actually, scratch that. Now the pressure levels aren't detecting AT ALL. I have the tablet enabled in Input Devices, and the pen is Pressure-Opacity but nothing changes based on pressure.
I tried this video but the fix did not work.
I'm having the problem with pen cursor when i use dual-monitor.
Before I run GIMP everything work fine, The pen cursor can move in both monitors.But when I run GIMP, It lock my pen area into only the main monitor, even if I close GIMP. So I need to restart my PC to use both monitor with my pen.
It seems to be fine locking pen cursor area in a single monitor, But GIMP cursor IS NOT CORRECT with pen cursor. They both should be the same, But they are not. As you can see in the photo.
I've tried changing the input mode for tablet to Screen and Window. But it still doesn't work.
PS.I'm running GIMP in Window 7 (32Bit), My tablet pen is Kanvus Life H85
I have a new computer that has Windows 8. I have attempted this with BOTH Gimp 2.8 AND 2.6. I have a regular Wacom Bamboo Tablet.
I've been hunting online for HOURS, and all I find are the same answers that don't work for me. What I find are answers like "Enable the pen and eraser in the Devices menu" and such and such. No, that does not work. Only the core pointer shows up in the devices menu, and there is NO WAY to change that. In the Input Controllers menu, what show up are DirectX DirectInput, Mouse Buttons, Keyboard, and Main Mouse Wheel. All of these are activated. Despite every attempt I've made, nothing changes. The tablet pen and eraser DOES NOT SHOW UP AT ALL.
Again, Core Pointer is the ONLY device that appears in the Input Devices. All available controllers are active. The tablet is plugged in, and YES, I opened Gimp WITH the tablet. I'm an artist who uses Gimp, so not having the ability to draw is like not having my lifeblood.
If there is a way of testing the pens sensitivity to pressure in real-time. I can hear it now. "Draw a line dummy."
To be more specific, any tool that can test number of levels of pressure sensitivity that a pen is capable of. I thought for sure I would find some downloadable software somewhere but no luck.
I'm using a Bamboo Pen and interested in how to verify it is in good working condition and reaching it's whopping 512 levels of sensitivity and also whether I'm pressing harder then I need to.
I'm having one really annoying problem and that its that gimp is not re-sizing the size of brush accordingly to the pressure level it just changes the opacity from low to 100%. I tried going to preferences and configuring but it resets back to previous state and in photoshop tablet works fine.
Tablet is Genius MousePen i608X
Windows xp service pack3
As a new gimp and tablet user, I'd had some difficulty making my tablet feel like I wanted it to. After looking at numerous tutorials, I spent a day customizing a brush that would respond well to my tablet's innate pressure sensitivity. The brush worked perfectly that day! Since then, however, I've needed to customize my brushes everyday, and mess with my tablet until the brushes actually respond to pressure sensitivity.I guess the big question is: how do I cause Gimp to recognize my tablet as being pressure sensitive each time I launch it?
View 2 Replies View RelatedI'm having a problem with my Wacom tablet. The stylus tool works fine (gradients, pen, paint) except for the erase tool - it won't erase to full transparency when I select the erase tool then drag my stylus. This is weird, since the actual eraser end of the stylus works fine: I just hate using that end of the tool, and much prefer using the stylus' pointed end to do all my work.
View 3 Replies View RelatedI have a tablet NB which has no keyboard, so I need to save my file byclicking the "Save" dialog with my tablet pen.Sometimes the "Save" dialog has no reponse when I was using tablet pen, butother input devices like usb keyboard and usb mouse worked fine. I foundthe "Save as" and "Save a copy" dialog had the same problem.
View 6 Replies View RelatedOS: Ubuntu 11.04
Arch: AMD64
Desktop Manager: Gnome 3
I recently blew away my Ubuntu 10.10 and installed 11.04. Not liking Unity, I figured I would try Gnome 3. After getting Gnome 3 set up, I downloaded babl,gegl, and gimp tarballs and proceeded to install all sorts of dependencies(required and many optional ones) via apt-get packages.
I then compiled babl(0.1.4), gegl(0.1.6), glib(2.29.8) gtk+(2.24.5) and finally gimp 2.7.3(note that all the above are from the gimp.org ftp site. Prior to compiling gtk+, gimp failed on the make with some really strange errors, which is why I compiled my own copy. Also note, ALL of the above were compile into a different prefix with :
./configure --prefix=/home/joefrazierjr/opt
Once I finally got GIMP compiled, I can see my tablet in the input devices, but they are greyed out along with all of the below:
SynPS/2 Synaptics TouchPad
Virtual core XTEST Pointer
Wacom Bamboo Fun 6x8 cursor
Wacom Bamboo Fun 6x8 eraser
Wacom Bamboo Fun 6x8 pad
Wacom Bamboo Fun 6x8 stylus
The ONLY thing that is NOT greyed out is Core Pointer.
The main reason I complied is because for whatever reason,the PPA package available does not also install Python(but does let the tablet work).
Note that I am comfortable with "using" the shell, but am a power user in linux, so assume that I know nothing about linux in any replies. Also, if I need to remove, any of the compiled code and recompile, I assume running "make clean"will fix it up correctly?
Note, my Bamboo Fun works fine in MyPaint(with pressure sensitivity,etc), so the issue is with either GIMP compile itself or GTK appsin general(If MyPaint is GTK or not). Also, I still have the build folders, so if I need to link to any of the config.log files, I will put on my dropbox.
I don't know if the section I'm posting this question in is certainly correct but I just can't figure out one thing that "my" GIMP used to possess years ago, while I was using it for the first time. And which doesn't seem to occur anymore after some more releases.
Now, to the point:
I'm using a WACOM Bamboo tablet and -- I need to make my core pointer use decent brushing parameters than my tablet rubber and stylus. The effect I'm seeking is to enable using my mouse pointer as a rubber with increased brush size comparing to the thin brush I'm using while drawing with the tablet. The brush size seems to be the same regardless of which tool I'm using at a time, and it stinks, because if I could use them in a decent way, my work would be way enhanced. I just need to know how to make those two mediums behave adversely.
Is their a way to get the pressure sensitivity of my Wacom Bamboo Capture tablet working with GIMP. Is tablets pressure sensitivity still unavailable to GIMP 2.8.2 Mac OS X?
View 9 Replies View RelatedWhen I upgraded to 2.8, UFRaw didn't come along for the ride.
I tried installing UFRaw into the GIMP2.8 folder, but I get an error message saying "The program can't start because libgdk-win32-2.0-0.dll is missing from your computer. Try reinstalling the program to fix this problem.
I just started using GIMP last week
I'm trying to put a watermark on an image using the opacity bar for the text. However, the text remains 100% opaque until I get down to 50% opacity, at which point it completely disappears. I thought there may be something wrong with the text layer (not sure if that's the right term.. layers and paths, etc. are all new to me), so I tried it with other tools such as the eraser and the same problem occurs. Is there a bug in my program or am I just really new at this?
So I've finally upgraded to GIMP 2.8, finding that .abr was native. I've downloaded thousands of brushes, only a hundred work, MAYBE. I'm confused because even the brushes that are not in .abr form do not work. Also, sometimes if I try to fix the brushes by uninstalling and reinstalling there will be random ones that work and then old ones disappear?
View 2 Replies View Relatedbasically I have a Genius MaxFire G-12U Vibration joypad controller, I wanted to map to certain actions and plug-in calls, but unfortunately this appears at the status of the device in "Configure Input Device" menu:
IDirectInputDevice8::SetDataFormat failed: incorrect parameter
When the actions have been mapped to the different buttons, and after GIMP has been reset, the actions do not happen after pressing the associated buttons.
GIMP website did not show an entry for such menu.
Using GIMP 2.6.12, Windows Vista 32 bit, 4 core Intel processor.
I've saved a file with paths as .xcf and I can call up the paths again in the paths dockable dialogue. But I can't actually see the anchors or edit the paths. How can I continue working on a path I was working on before?
View 2 Replies View Relatedi have just installed GIMP 2.8 on to my computer running UBUNTU 12.04, everything seemed to go ok with it opening up, but when i tried to select a tool, the tool icons go through the motions of selection, but non of the tools will work.
View 5 Replies View Related