I have a new computer that has Windows 8. I have attempted this with BOTH Gimp 2.8 AND 2.6. I have a regular Wacom Bamboo Tablet.
I've been hunting online for HOURS, and all I find are the same answers that don't work for me. What I find are answers like "Enable the pen and eraser in the Devices menu" and such and such. No, that does not work. Only the core pointer shows up in the devices menu, and there is NO WAY to change that. In the Input Controllers menu, what show up are DirectX DirectInput, Mouse Buttons, Keyboard, and Main Mouse Wheel. All of these are activated. Despite every attempt I've made, nothing changes. The tablet pen and eraser DOES NOT SHOW UP AT ALL.
Again, Core Pointer is the ONLY device that appears in the Input Devices. All available controllers are active. The tablet is plugged in, and YES, I opened Gimp WITH the tablet. I'm an artist who uses Gimp, so not having the ability to draw is like not having my lifeblood.
I recently blew away my Ubuntu 10.10 and installed 11.04. Not liking Unity, I figured I would try Gnome 3. After getting Gnome 3 set up, I downloaded babl,gegl, and gimp tarballs and proceeded to install all sorts of dependencies(required and many optional ones) via apt-get packages.
I then compiled babl(0.1.4), gegl(0.1.6), glib(2.29.8) gtk+(2.24.5) and finally gimp 2.7.3(note that all the above are from the gimp.org ftp site. Prior to compiling gtk+, gimp failed on the make with some really strange errors, which is why I compiled my own copy. Also note, ALL of the above were compile into a different prefix with :
./configure --prefix=/home/joefrazierjr/opt
Once I finally got GIMP compiled, I can see my tablet in the input devices, but they are greyed out along with all of the below:
SynPS/2 Synaptics TouchPad Virtual core XTEST Pointer Wacom Bamboo Fun 6x8 cursor Wacom Bamboo Fun 6x8 eraser Wacom Bamboo Fun 6x8 pad Wacom Bamboo Fun 6x8 stylus
The ONLY thing that is NOT greyed out is Core Pointer.
The main reason I complied is because for whatever reason,the PPA package available does not also install Python(but does let the tablet work).
Note that I am comfortable with "using" the shell, but am a power user in linux, so assume that I know nothing about linux in any replies. Also, if I need to remove, any of the compiled code and recompile, I assume running "make clean"will fix it up correctly?
Note, my Bamboo Fun works fine in MyPaint(with pressure sensitivity,etc), so the issue is with either GIMP compile itself or GTK appsin general(If MyPaint is GTK or not). Also, I still have the build folders, so if I need to link to any of the config.log files, I will put on my dropbox.
The problem occurs since the GIMP requires GTK+ version >= 2.24.7 (Around November 25).
Currently I have to date the latest versions from Git of babl, gegl and GIMP. Gtk +-2.24.8, glib-2.31.2, pango-1.29.5.In Edit > Preferences > Input Devices > Configure Extended Input Devices only shows "Core Pointer". Do not show my mouse or my Genius tablet, which before the version I had mentioned they appeared and everything worked.
In Gimp 2.6 everything works tooI tried deleting the ~/.Gimp-2.7/ folder but the new generated "device.rc" file only shows "Core Pointer".My distribution is Kubuntu Oneiric 11.10 64bit.xserver-common, xserver-xorg-core = 1.10.4
how to turn off the brush pop up menu when you hold the wacom pen on the canvas for a couple seconds. this makes drawing a circle impossible as it creates a small straight line first because the program is thinking if i want this menu to pop up or not. I have tried disabling it in my wacom preferences with no success,
get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
I have a Genius 8x6 tablet, and it worked fine with 2.6. 2.8 doesn't register the pressure on my tablet. I checked another thread about 2.8 not registering tablets, and it said to configure input devices and change the pen setting. I don't have a pen option on the devices list. All that shows up is is the core pointer/ mouse.
I just updated to GIMP 2.8, and my tablet -a digipro WP5540- does not work with GIMP unless it is in disabled mode under input devices. When "disabled", it works except with no pressure sensitivity. When "enabled", the tablet can be used to click on menu options and the brush will follow the tablet position at random intervals only when the cursor is not on the canvas.
I have been using bamboo fun with gimp(2.6 or older) for ages without any problems with either one. Today I finally managed to make it into the store and upgrade my tablet to bamboo pen and touch. Also found a new gimp version and decided to get that one as well. I uninstalled all old drivers and the old gimp before installing the new ones
So I got my pen tablet working and gimp 2.8 installed. Everything seemed to be just fine until I tried to add my tablet as an input devise. Gimp just does not show tablet on the list, it wont recognize it's pressure sensitivity or any similar things the tablet is supposed to do. I restarted my computer between installing the drivers and the latest gimp, I restarted after installing gimp. Heck, I've restarted my computer about a dozen times today and still nothing gimp wont find my tablet. I've deleted my old profile data from the .gimp2.6 folder in the uninstalling process so it cant be about that
I tried searching fixes and things that worked for 2.6 but none of those worked for me so here I am. I tried using both the latest drivers and the ones that came with the tablet but neither made gimp recognize the tablet that is working just fine with every other program in existence
Recently I have been noticing that while I am drawing on gimp using my tablet at times the brushes start to freak out and just keep rotating constantly.
I cant make a straight line using a rectangle shaped brush. And this happens to all the brushes. It just makes everything look really messy.
My graphics tablet is Wacom CLT-470/K (pen) without buttons on tablet. But my pen have two buttons and i want to know, how to set up them. For example i want that when i tap first button, undo the last change occurred. Of course i can set in properties of tablet driver (then tap first button, ctrl+z occured), but GIMP (!) still understand that first button (near the pen tip) is right mouse button, and second is middle mouse button, ever after reload GIMP. In old version GIMP, like 2.2.17, gimp understand pen button in accordance to properties of tablet driver, but old verstion is too unstable.
After updating to GIMP2.8.4 I am seeing a constant problem with the canvas not updating after any change unless I move the cursor out of the image area. It starts updating immediately but if I move the cursor back it stops even if it hasn't finished redrawing. This is not just for image changes; the selection outline does not update either unless I move the cursor out of the image area! There's another problem with the selection outline - sometimes it just stops displaying, period, and I ave to use quick mask or save and close GIMP.
I had to restore my laptop to factory settings, which means I needed to re-install GIMP too. So I went to download GIMP on the site, and 2.8 was the only version there so I went for it. Installed my tablet too, with driver. GIMP recognizes the tablet, but whenever I try to draw, I get a semi see-through line, instead of a bold one - and there is no change in this when I change the pressure on the pen. When I used it before, it always changed the opacity of the brush in accordance with the pressure on the pen. But I don't know how to change this in GIMP now?
Using: TB-5300 Slimline Design Tablet Windows 7 (32 and 64 bit, problem occurs on both)
The problem I am having is that the X-coordinate for my pen tablet is incorrect. The paint brush appears to the left of the screen and doesn't move as far left/right as my pen does. By moving the position of the drawing area I have found that pressure works correctly. Strangely, the position of the mouse when being controlled by the pen tablet is correct, it's just the paint brush which is wrong.
I can correct this problem by uninstalling the pen tablets drivers, but then the pressure sensitivity stops working.
This problem fixed itself for about a few days, but then came back without anything apparently having changed in that time.
It's occuring in both a 32 and 64 bit version of windows.
tablet is good for sketching and mouse is good for pathing, but i cant use both at the same time. What can i do?I need to point out that disabling the pen doesn't work I need the pressure feature on...im using gimp 2.8 on windows 7 32bits, usng an acteck di-pen5500 tablet pen.
I'm trying to get the pressure levels for my tablet working right. I want it to increase hardness when I press harder, but instead hardness DECREASES. Is there a way to flip it around? The matrix just seems to be booleans, with only checkmarks or no checkmarks.
Actually, scratch that. Now the pressure levels aren't detecting AT ALL. I have the tablet enabled in Input Devices, and the pen is Pressure-Opacity but nothing changes based on pressure.
I'm having the problem with pen cursor when i use dual-monitor.
Before I run GIMP everything work fine, The pen cursor can move in both monitors.But when I run GIMP, It lock my pen area into only the main monitor, even if I close GIMP. So I need to restart my PC to use both monitor with my pen.
It seems to be fine locking pen cursor area in a single monitor, But GIMP cursor IS NOT CORRECT with pen cursor. They both should be the same, But they are not. As you can see in the photo.
I've tried changing the input mode for tablet to Screen and Window. But it still doesn't work.
PS.I'm running GIMP in Window 7 (32Bit), My tablet pen is Kanvus Life H85
If there is a way of testing the pens sensitivity to pressure in real-time. I can hear it now. "Draw a line dummy."
To be more specific, any tool that can test number of levels of pressure sensitivity that a pen is capable of. I thought for sure I would find some downloadable software somewhere but no luck.
I'm using a Bamboo Pen and interested in how to verify it is in good working condition and reaching it's whopping 512 levels of sensitivity and also whether I'm pressing harder then I need to.
I am using GIMP 2.8, and the brush dynamics do not seem to work. Whenever I use Pressure/Opacity, no matter how hard or light I press, nothing happens to the opacity.
I tested my tablet's pressure sensitivity using the built in pressure test. Everything seems fine. It works fine with Photoshop CS2, but I want to use GIMP.
Everything seems fine when I use Speed/Size & Opacity.
I'm having one really annoying problem and that its that gimp is not re-sizing the size of brush accordingly to the pressure level it just changes the opacity from low to 100%. I tried going to preferences and configuring but it resets back to previous state and in photoshop tablet works fine.
Tablet is Genius MousePen i608X Windows xp service pack3
As a new gimp and tablet user, I'd had some difficulty making my tablet feel like I wanted it to. After looking at numerous tutorials, I spent a day customizing a brush that would respond well to my tablet's innate pressure sensitivity. The brush worked perfectly that day! Since then, however, I've needed to customize my brushes everyday, and mess with my tablet until the brushes actually respond to pressure sensitivity.I guess the big question is: how do I cause Gimp to recognize my tablet as being pressure sensitive each time I launch it?
I'm having a problem with my Wacom tablet. The stylus tool works fine (gradients, pen, paint) except for the erase tool - it won't erase to full transparency when I select the erase tool then drag my stylus. This is weird, since the actual eraser end of the stylus works fine: I just hate using that end of the tool, and much prefer using the stylus' pointed end to do all my work.
I have a tablet NB which has no keyboard, so I need to save my file byclicking the "Save" dialog with my tablet pen.Sometimes the "Save" dialog has no reponse when I was using tablet pen, butother input devices like usb keyboard and usb mouse worked fine. I foundthe "Save as" and "Save a copy" dialog had the same problem.
I don't know if the section I'm posting this question in is certainly correct but I just can't figure out one thing that "my" GIMP used to possess years ago, while I was using it for the first time. And which doesn't seem to occur anymore after some more releases.
Now, to the point:
I'm using a WACOM Bamboo tablet and -- I need to make my core pointer use decent brushing parameters than my tablet rubber and stylus. The effect I'm seeking is to enable using my mouse pointer as a rubber with increased brush size comparing to the thin brush I'm using while drawing with the tablet. The brush size seems to be the same regardless of which tool I'm using at a time, and it stinks, because if I could use them in a decent way, my work would be way enhanced. I just need to know how to make those two mediums behave adversely.
Is their a way to get the pressure sensitivity of my Wacom Bamboo Capture tablet working with GIMP. Is tablets pressure sensitivity still unavailable to GIMP 2.8.2 Mac OS X?
I am trying to make some changes to a graphical text menu on a web site and it looks terrible. I can't figure out what I'm doing wrong. I'm using the same font, size, background etc. Font is Baskerville Old Face, Regular, 14pt Strong on a transparent background.
I get an error telling me that in order to access help, I need to be connected to the internet. I AM connected to the internet (otherwise, I would not be able to post this question). All I am trying to figure out is where in the heck "Text Wrap" moved to since I cannot find it under "Window" or "Text," but realizing I have NO access to help in the program suddenly made THAT the bigger issue here. Do I need to trash my preferences file or something? I'm on a Mac, running Mountain Lion, Illustrator CS6.
We just installed 2012 and the new 'select other' pop-up window worked for about 2 days and just quit. Is it controlled by a setting I somewhere inadvertently changed?
