Is it possible to move the text box? Because it's ANNOYING how whenever i want to move the text somewheres else, it just makes a pop-up screen that edits the text....can't i, MOVE IT? And can i change the font and color to text too?
View 7 Replies
I've croppsed and resized an image
I try to put text over it and then move that text
I just can't move the text
Instead the image layer moves
Yesterday I download Gimp 2.8 and after eyedropper bug I found out that can´t move text layer during editing it. I don´t think to move layer tool.
I can´t move the layer during editing. I can move only with the borders of the text range. When I want move with active text layer, I must do it through the "move layer tool".
I added text to a new layer on a photo, I was able to adjust the angle to fit what I wanted but I am unable to move the text to where I want it on the photo. I would expect that there would be a select tool so that I could select objects and move them around but all I find is tools to paint with and such. Surely there is a way to move a text box around.
View 2 Replies View RelatedI am trying to move a text layer from one open file to another. I left-click on a text layer in one file and drag it to the tab of the other file. It seems to be successful, but there is no layer added to the other file.
If I try copy and paste then there will be another layer in the other file that I have to anchor or set as a new layer. If I anchor it then it becomes a part of the default layer. If I set it as a new layer then there is some sort of success, but I can’t edit it with the text tool as I can if I copy it within the same file.
Is it not possible to copy text layers between open files and continue to edit it with the text tool?
So, I'm trying to make moods for forums like this: and I don't know how to make my text move vertically or horizontally. The person who made this uses Gimp as well, so I know there is a way.
View 1 Replies View RelatedIs there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedWe are using autocad 2012.
Is there a way to move all 3.5mm text to layer text3.5 and move all 5mm text to layer text5.
Although I'd like to move all of my layers at once, because I resized my canvas..
I can't even get one to move. What am I doing wrong? I followed these instructions.
[URL]
I have problem with moving layers , i cannot move with them , the same thing in Photoshop, - recently everything was normal
View 3 Replies View RelatedI have read numerous tutorials, etc about Gimp, but I see nowhere how to move an image into Gimp in the first place. I have pics in my computer, but i must know how to put them into Gimp for editing, etc.
View 2 Replies View RelatedI bought a new computer - still have access to the old one through ssh.The old computer running suse11.3 has many gimp brushes that I made.New computer running suse11.4, gimp 2.6.11How can I get my brushes (the ones I made) over to the new computer/newGimp?
View 6 Replies View Relatedi installed it shows up in my python i click it, it shows my brushes i choose the brushes BUT it does not load at all and i even try moved all of my brushes to another folder....is it because of the preferences?
View 3 Replies View RelatedWorking on a book cover but it seems that once something is down and saved - like my title - I can't just go back and tweak it with resizing and moving. How to simply rearrange the layout?
View 4 Replies View RelatedI need to move layers exactly on the very corners of a background, without going over them. How do I do it?
View 2 Replies View RelatedHow would I go about making certain text and/or layers to gradually move throughout a video? Can I not do that in Gimp 2?
View 1 Replies View RelatedI need to move one color channel from one image to anther and completely replace the channel.
View 3 Replies View RelatedI need to cut a part of one path and paste it as a part of another path. Is there a way in GIMP for doing this? Currenty, all what I can do is to select required anchors of the source path. Then, all I can do with this selection is moving it as a whole. The commands "Copy path" and "Paste path" ignore selection and work with entire path.
View 2 Replies View RelatedOnce i have 'selected by rectangle' and copied its innards how then can i move rect-image to where i want to place it? I am used to just clicking the 'pointer tool / move tool', and move it.
View 2 Replies View RelatedI have a question for tools in GIMP. Now I see that the tool moves in a certain grid. Now, I want the other tools to move like that too. What I'm saying is that the pencil tool moves by pixels in my document. Since I like to do pixel art, it'd be nice if the other tools also moved like that, by pixel not free form. I'm working on a 32x32 grid and it's good that the pencil moves like that. I just want other tools to move like the pencil, pixel by pixel, now it might be different pixel movement for me since I have my grid set up at 4x4 spacing, I'm a newbie at GIMP and would like if you can answer this question.
How do I make other tools move like the tool. My grid's set up at 4x4 and the pencil moves pixel by pixel. I like that how can I get other tools to move like that?? I just noticed grid doesn't matter, but I want to make other tools move like the tool.
Just did a beginning drawing and placed it too close to an edge. Tried figuring out how to move it away from the edges. When I select it with one of the select tools, and then use the move tool, it moves the whole canvas (right word?). I did not want to move the canvas, just the object on the canvas, or layer, or background, whatever it is called.
Perhaps there is no way to move this. If that is the case, then how to I make the background bigger, and keep the object where it is so I can draw around the object?
THERE I'D LIKE TO ASK ABOUT CUTTING ... SO I'VE DONE THE SCISSORS THING ,CLOSED THE SELECTION AND IT APPEAR IN A FRAME , HOW DO I MOVE SELECTED AREA ? ALSO HOW TO MAKE THE FRAME ITSELF DISAPPEAR ?
View 4 Replies View Relatedi switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
I am using Gimp version 2.6..At the start-up it has the "Paintbrush Tool." I want it to have the "Move Tool" immediately after or when the program starts.
Having the Paintbrush Tool at start-up is inconvenient because if I click on the image it paints where I click. Then I have then got to undo the paint.How can I set GIMP so that the Move Tool is the default mode when it starts?
I am trying to move a layer with photo or adjust and then I get to see this sign. What am I doing wrong?Can you explain to me what I should do differently.
View 3 Replies View RelatedI'm using Gimp 2.8.4, Win8.
I also noticed the "Left Endpoint's Color" is not available.
I'm fairly familiar with Gimp in general, but never needed to get this deep editing gradients. Of course, if those sliders would move I could have figured out the rest...
How can I move (rotate or otherwise transform) a Selection.
1. Suppose I have a single Layer, on which I draw an image.
2. Now I activate a Selection Tool (Rectangular, Elliptical, Lasso, etc.) and make a Selection.
3. Then I activate the Move Tool and click on the "Move Selection" option, not the "Move Layer" option. [Oddly, when the "Move Selection" option is activated, there are two greyed out (unavailable) sub-options, both indication "Move Selection".]
4. With the Move Tool, I am able to move the Selection, but not the contents of that Selection.
The Gimp Documentation guide says:"If you click-and-drag the selection without handles, you create a new selection! To move the selection contents, you have to hold down Ctrl+Alt keys and click-and-drag the selection. This makes the original place empty. A floating selection is created. The required key commands may differ on your system, look in the status bar to see if another combination is specified; for example, Shift+Ctrl+Alt."
I have tried every combination of Shift, Ctrl and Alt (Shift+Ctrl, Ctrl+Alt and Shift+Alt). None of these allow me to move the contents of the selection. Further, there are no "handles" on the Selection. I suppose the key is to get the handles to appear, but I have not been able to discover the secret combination of keys to make that happen.
I am running Windows XP Pro.
It would be nice if there was a way to import all the Move Path settings for a project from an Excel-type spread sheet. It would reduce the irksome data input errors that I seem to make all too often. Plus, you could use the power of the spreadsheet to calculate different points/frames.
View 3 Replies View RelatedI opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
I've created a New image and selected Open Layer to bring another image in, however the 'other' Open layer image' appears in the center of the newly opened image space. How can I move the Open layered image around?
View 1 Replies View RelatedHow could I select and move two or more images (different layers) together?
Is it possible to align one image considering the position of the other?
