I added text to a new layer on a photo, I was able to adjust the angle to fit what I wanted but I am unable to move the text to where I want it on the photo. I would expect that there would be a select tool so that I could select objects and move them around but all I find is tools to paint with and such. Surely there is a way to move a text box around.
View 2 Replies
Yesterday I download Gimp 2.8 and after eyedropper bug I found out that can´t move text layer during editing it. I don´t think to move layer tool.
I can´t move the layer during editing. I can move only with the borders of the text range. When I want move with active text layer, I must do it through the "move layer tool".
On a new transparent layer, I have drawn a straight line with the pencil tool. I select the Box Selection tool to select the whole line that I just drawn. I switch to the Move tool and made sure to move just the selection.
At this point, I would think that I would be able to move the line but only the box that is shown by the Box Selection tool moves. The line doesn't move at all. However, when I tell the Move tool to move the selected layer, the whole canvas moves, including the line. Why can't I just select just the line and move it?
I am trying to move a layer with photo or adjust and then I get to see this sign. What am I doing wrong?Can you explain to me what I should do differently.
View 3 Replies View RelatedWhen I move my mouse over the drawing area, the brush simply freezes at the corner next to the rulers, the regular cursor continues to move and I can click on the buttons, tools and menu, but my mouse is not functioning in the workspace, I can use my wacom tablet fine, but I still need my mouse to be functional for lassoo tools etc.
It is a very recent install, I may have some how buggered the mouse input when configuring my wacom.
I'm running Arch Linux, with KDE.
I try to move text in a layer with the move tool. I highlight the text layer, select the move tool, and move the tool to the text. As soon as I click on the layer with my mouse, the highlight moves to an image layer below the text layer. I can move the text using the arrow keys, but that takes forever.
View 3 Replies View RelatedI've croppsed and resized an image
I try to put text over it and then move that text
I just can't move the text
Instead the image layer moves
How do I move text to a different area of the photo?
View 3 Replies View RelatedIs it possible to move the text box? Because it's ANNOYING how whenever i want to move the text somewheres else, it just makes a pop-up screen that edits the text....can't i, MOVE IT? And can i change the font and color to text too?
View 7 Replies View RelatedI am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
View 1 Replies View RelatedI am trying to move a text layer from one open file to another. I left-click on a text layer in one file and drag it to the tab of the other file. It seems to be successful, but there is no layer added to the other file.
If I try copy and paste then there will be another layer in the other file that I have to anchor or set as a new layer. If I anchor it then it becomes a part of the default layer. If I set it as a new layer then there is some sort of success, but I can’t edit it with the text tool as I can if I copy it within the same file.
Is it not possible to copy text layers between open files and continue to edit it with the text tool?
So, I'm trying to make moods for forums like this: and I don't know how to make my text move vertically or horizontally. The person who made this uses Gimp as well, so I know there is a way.
View 1 Replies View RelatedI am clicking on a layer in GIMP, and when I click on the text tool, this dialog pops up"CONFIRM TEXT EDITING" "the layer you selected is a text layer but it has been modified using other tools. Editing the layer with the text tool will discard these modifications. You can edit the layer or create a new text layer from its text attributes."
with 3 options, Create New layer, Cancel, and Edit
however, no matter what I click, it doesn't let me create new text anywhere.
ALSO, it seems to jump from the layer i selected to another layer whenever I click "EDIT."
What is weird is that I was able to create new text prior to this, but not anymore. I am editing a photoshop document, but it's now saved as XCF. Also, it's gimp 2.8.0
With Photoshop 11, when I Share a photo through Email attachment I am unable to add any text to the Email. Can this be fixed? If I purchase Photoshop 12 will I eliminate this problem?
View 4 Replies View RelatedI use 2.8.2. I have some words on a picture, in a text layer. I didn't make anything with the text, it is pure text. I want to edit it. I open the layer and click on the text. As soon as I click, I get a new text field, and if I write something, a new text-layer opens. The old one is untouchable. What can I do?
Here is a screenshot:
[URL].......
I can't rotate a text box in my XCF file. When I create a new XCF file, I can easily create and rotate a text box.
I've attached the problematic XCF file. See if you can rotate the text box.
I have created my own graphics from scratch with GIMP, but the resolution to this issue is eluding me.
I imported a GIF map and want to add red labels. I have no problem adding the labels, but I cannot seem to get the text colored red. Before I create the text layer, the text tool shows the color is red, but it still creates it black. All of the suggestions I've seen (yes, I've read the fine manual) reference the same things, including dragging the color from the foreground color (which I've also changed to red). Nothing I've tried seems to work. I've even saved the image as an XCF, but I have the same problem.
I have written a few words and created also a transparent background (I think...)
What I would like to do now is to place a photo as a background to the text I already have. Is that possible or do I have to start with the photo?
Can Gimp superimpose text in landscape orientation on photo?If so, I can not find in the documentation how to do this.
This is my first posting. I hope I am asking through the correct list serve?
while trying to type a text in Greek language on a photo. I have to tell you that i have done in the past many times this job (type Greek letters on a photo for watermarks etc) with the same program and the same computer until two days ago!
I checked the input method, i resetted the values inside the options from gimp preferences , i uninstalled the program twice and reinstalled it, i removed all the app Data for the specific software but still doesn't work. When i try to type Greek letters , i get strange symbols that i cannot paste here! It pastes normally the characters that i wrote on. I use gimp 2.8.3 and my OS is Mac OS Lion 10.7.4
I'm trying to label parts of an engine photo with the text feature in GIMP. However, after I have typed my text and press enter or escape, it always leaves a yellow and black hyphenated rectangular frame around the text. How do I get rid of this frame so that only the text will be left?
View 4 Replies View RelatedI did put a real photo in the background of my website to fit entire page. So the text of my webpage is black, and sometimes other colors. So what happen is that some times the text is hard to read when it come on top of dark places of the photo (for example hear of people). So i want to adapt the photo to make it more unicolor, more whiten (increase whiteness) so the black text will appear even better.
What tools and filters in gimp that give me this ability to do that ?
On one machine, we can´t move the pivot point of an object. On another machine it´s no problem.
View 7 Replies View RelatedI just cannot move any polygon that I've created using the Polygon Tool. After making polygons, I ensured they had not been locked and selected the Move Tool to move them to no avail.
View 2 Replies View RelatedAfter making a selection in Photoshop CS6 I cant move the selection? I am using a Windows 8 PC. AMD A6-3670 Radeon HD Graphics 2.7 GHz. 64 bit OS.
This seems to be a new problem over the past couple of weeks.
I'm having issues in a particular drawing with moving a single polyline. I'm trying to move one polyline, but it instead moves all connecting polylines and some nearby polylines.
My specific example: I have a layer for the existing house, a layer for a hedge, and a layer for a fence. The polyline for the hedge is currently touching the polyline for the house and the fence polyline is next to it (but not touching). When I click on the hedge and try to pull it away from the house (whether from the end grips or midpoint) it will also try to move the polyline of the house that it's touching and the polyline of the fence that is closest to the hedge. When I try to move it using the MOVE command, the same thing happens.
I've tried shutting down CAD and turning it back on, opening it on another computer, flattening the entire drawing, and copying everything and pasting it into a new file. Nothing has worked so far.
I have downloaded Issue 4.2 but am unable to manipulate any photos. When in 'Develop' mode the sliders are greyed out (I can't move them. I have downloaded the programme twice but with the same result.
View 4 Replies View RelatedThis process works fine on my desktop but when I try to move an image from LR4.4 to CS6 on my new Lenovo laptop (Windows 7) nothing opens and I freeze up.
View 5 Replies View RelatedWhen I attempt to move a folder into another folder, I get the message that it is already present in that folder ( but it is not there)
View 2 Replies View RelatedI am new to GIMP.
I want to import a photo, trace geometric shapes over the photo like circles and lines, and then remove the photo. I have a very basic understanding of LAYERS. I have viewed a few tutorials. But I don't know how to import a photo or how to get rid of it once I have drawn the geometric shapes over it.
After creating a duplicate layer of a stroke, I then click the thumbnail of an existing layer (where I want to move the copied layer to) while holding the control key, I see the image with marching ants border, and attempt the move the copied layer. I get the following message ' the request could not be completed because the sourse and the destination documents are the same.
View 7 Replies View Related
