My wife is designing some tote bags that she will have screen printed. I use CorelDRAW at work for manual publishing, and she is having me draw out her designs. I was wondering if there is a way to cut out the white objects from the black object behind in the graphic below. It would save having to add a white color, instead just showing the natural color of the bag.
On another note, I'm getting tired of having to do this for her, but she says the screen printers only take .cdr or .ai files. She's been using iDraw on my iPad to come up with her designs, then I replicate them in Corel. She has a Mac laptop, and I'm wondering if there are any reasonably priced programs that would export to .ai or .cdr so I don't have to do this anymore.
Question: How can I get the objects to appear in the Object Manager?
I have the CorelDraw 6X suite. The objects in the Object Manager window are not showing up. It's supposed to have curves, images, and text there. Instead, it has got just the following:
Master Guides (all pages)
Desktop Guides Layer 1 Document Grid
I have been using CorelDraw since about 1999. My first CorelDraw program was CorelDraw 9. Then about six or eight months ago I purchased CorelDraw 6X
This is the first time anything like this has ever happened.
Just as of today, as I begin adding objects &/or text to a graphic, absolutely nothing is 'showing up' in the Object Manager under Layer 1. It seems like always in the past, whenever I added a shape or text or curve or anything, a new line would be added under whatever Layer I was working in, detailing the object's properties.
Is there some simple config-setting that I tripped without knowing it?
My list of objects in the Object Manager docker have disappeared and I can't see how to get them back. With the layer manager view I can see the layers but no way can I display the objects (which I normally use a lot).
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
When you draw a marquee around several objects and you want to eliminate one thing from the selection, is there a way to unselect just one object from being selected without having to unselect and reselect everything else?
My object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
I have a need for a macro that I am thinking would be pretty easy to create... I need a macro to cycle through all objects on a page and IF it finds an object that is LARGER than 13" wide, it will unproportionaly size each object to exactly 13" wide (leaving the height of the object alone.) and then after all of the scaling/sizing is complete then to select all objects and right align them (Like when you select all objects and hit the letter R key.
I have a logo which appears in the footers of all of our technical manuals. Word recognizes it as a picture, and so our printer prints it in color, not black and white, so we are charged for the color copies.
I have exhausted my options in Word, and have been trying to create it as a TrueType font in DRAW, so word just thinks it's a symbol, not a picture.
The only file I have of the logo is a .bmp, so I've been tracing it to get it into vector form to manipulate. However, after all of my welding, combining, front minus back ect. ect. ect., I still can't get it down to the "1 object" requirement to make it a font.
I know my code below wont work, just putting here to hopefully explain more exactly what im trying to do
Sub FindbyFill() Dim sh As Shape dim findColor ActiveSlection.GetColor = findColor For Each sh In ActiveLayer.Shapes If sh.FillColor = findColor Then ActiveSlection + sh End If Next sh
I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
Let's say, for example, that i create an object with a size, then i create other objects with other sizes.
When I try to see the size of the first object created it says that has the same size like the other objects which have other sizes (it's even obvius cause they r bigger on my screen:D).With all the other versions of Corel i didn't had those problems, but X5 does that.
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
how to edit revit objects in 3dsMax. How do I separate objects to make them individual objects? In other words, when I try to select the roof, I get ALL objects that are "dimensional lumber" i.e. I joists, roof, fascia, etc.
I tried selecting a roof polygon and making a copy and editing it but still when I apply materials to this polygon they apply to all of the dimensional lumber. Probably because I made a copy as a clone but it didn't give me the "copy" option.
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
I have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
I have the words Kuhns Creations here, it is going to be the logo for my website. In the end the letters will all be the light blue color that "Kuhns" is right now, I'm just using the different colors to explain my problem. I want the pink part of the "C" to be in front of the "K", but I want the black part of the "C" to be behind the "K", giving the illusion that the "C" is passing through the "K" (this will only be visible cause of the drop shadows on both letters, since they wil both be the same color) Is there a way to do this?
I got this effect in Photoshop, but I need to do it with vectors because the size of the image that has to be uploaded to my website is so small that you lose all detail if its a bitmap (52 pixels x 103 pixels) In addition to the effect explained above I am trying to get a bevel effect. In Photoshop it works and is easy to do but in illustrator the settings are all different and anything I enter looks totally different.
The settings that I'm using in Photoshop are: Style: inner bevel, technique: smooth,depth: 1%, direction: up, size 10 px, soften 0 px, angle:,120 degrees, altitude: 30 degrees, highlight mode: screen, Opacity: 75%, shadow mode: multiply, Opacity:75%. How do I get this same effect in illustrator?
I got a simple question about the creation of copies of an object. Is it possible to have the objects in the mirroring of an object change with the object used as reference for mirroring?
If there is no function to do this directly is there a way to do it via Ilogics to update the mirrored objects? If possible even by deleting and creating a new the mirroring yet not manually but by i logic?
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.