CorelDRAW X6 :: Can't Move Text Or Objects
Oct 16, 2013I have created a two page file. None of the objects, text or layers locked, but the program is not allowing me to move anything.
I have restarted the program and cleared my temp directories.
ADVERTISEMENT
CorelDRAW X6 :: Can't Move Objects By Click Dragging Mouse
Jan 19, 2013I've gotten into a mode where I can't move objects by click dragging the mouse with the left mouse button. I've looked everywhere to see if there is some config parameter that changes the meaning of mouse buttons, but have found none. I've rebooted and reloaded Draw and nothing has changed. I'm sure X6 didn't come this way, even though I've only been using X6 for 6 months or so. I click drag move objects all the time, so I'm sure I'd have noticed this. I've even tried resetting the workspace, but holding down the F8 key while loading Draw doesn't seem to work.
View 8 Replies View RelatedCorelDRAW Graphics Suite X6 :: Unable To Select And Move Objects?
Nov 7, 2013issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Suddenly Unable To Move Objects
Jun 23, 2011I was working on a document and suddenly was unable to move selected objects! This was true on all 3 pages. I had not changed any settings. I could select objects but not move them.....In the Object Manager, all layers are visible and editable. Even Edit through layers is checked. And the working layer was red.
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Unlinking Text Frames To Move Text Independently From Others?
Apr 5, 2011Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedCorelDRAW X3 :: How To Move Text Closer Together
Apr 20, 2012How do I move the text closer together in this masthead. I want the Rubia Advertising to be just above the line and the phone number to be just below it.
[URL]
Maya Modeling :: Move / Scale Entire Item - Objects Move Separately
Dec 9, 2012So a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
CorelDRAW X6 :: How To Run Add Objects In Text Box
Nov 16, 2013I glad to know can i run object with text in coreldraw. I'm working on a book the when i format the some paragraphs the fractions and decorative things back and fro from its original position. So it's a pretty hard to arrange manage on its original position. I try by grouping them with text boxes. The real problems is about fractions and square roots which is drawn by nodes. Can i add equation from math type in text box.
View 2 Replies View RelatedCorelDRAW X5 :: Put Values To Text Objects?
Mar 14, 2011I'm designing a catalog with some prices, every product have a code. Working with layers, I can group 3 objects: A produtc photo, the price and the code. So I rename the group to the code of especified product.
As we see, I can identify the groups, and by code I know what the product I'm working on. I think it's a very organized way to work.
Here the question:
Can I load the prices values from a txt file? I'm using X5.
CorelDRAW Graphics Suite X4 :: How To Move Text Boxes In Transparent Mode
May 20, 2011A colleague of mine has problems when moving a textbox.She grab the textbox with the mouse, the complete work area change to a white background, so she doesn't see, where she has to drop the mouse cursor. After she drop the mouse cursor, the background change to the graphic again.
The hardware she uses is new and included the following components:HP Z200 i7-870 Workstation2,93 GHz, 6 GB 1333MHz DDR3, ATI FirePro V3800 with 512MB RAM, Windows7 Prof 64bit
CorelDRAW X4 :: Batch Curving Of Text Objects?
Jul 22, 2011I've been curving my documents' text objects manually page by page, one by one. Is there a quick way to convert all the text present in documents to curves in one go? There must be a macro.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
CorelDRAW X5 :: Shaping Text And Removing Outside Objects
Aug 30, 2012I was working on a self project and I have text finally set in the right place, but when I remove the outside box, my text disappears as well. I need to find a way to leave only the text on my document and be able to remove everything else.
View 1 Replies View RelatedCorelDRAW X6 :: Outlines On Text Or Objects Are Notched
Mar 12, 2013Recently any outlines that I put on Text or Objects has been coming out "Notched".
I cannot be certain when this started happening, but i have tested files I have created in X6, saved down to X3 and printed from a different computer (running X3) with the same result.
Even PDFs created from this installation of X6 have this outline issue.
I have uninstalled my printer and reinstalled to see if that was the issue (HP Color LaserJet 3700). This same issue also occured on a different HP Color Laserjet 4650. These are both using PCL 5 drivers, as installed by Windows 7.
I have also tried different "Line Caps" settings, but no luck.
This nex screen shot is a scan of the printout of the above file. as you can see the text outlines and box outlines are notched.
This is a screen cap of the settings i have used, although it doesnt matter if I use, behind fill or not, the result is the same.
CorelDRAW Graphics Suite X4 :: Can't Select Multiple Text Objects
Dec 10, 2010I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
CorelDRAW Graphics Suite X6 :: Interactive Rotate With Multiple Paragraph Text Objects?
Nov 18, 2013With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedCorelDRAW Graphics Suite 12 :: Converting CDR File To PDF Which Contains Objects / Text With Fountain Fills?
Jul 30, 2012For some reason I am having issues converting a CDR file to PDF which contains objects/text with fountain fills.
I have looked at some previous posts detailing the same problem, have followed their remedies, i.e. "render complex fills as bitmaps" in the advanced tab in the PDF conversion pane. Despite these best efforts I am still having the problem of my black background; fixed in the "page layout" tab being corrupted, resulting in the background being the fountain fill once converted.
CorelDRAW Graphics Suite X5 :: Vector Objects Behind Transparent Objects Turns Into Bitmaps When Exported
Aug 18, 2011I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
Revit :: Objects Move By Themselves?
Mar 27, 2013I'm having the problem that when i single click on anything (wall, column, roof etc etc) in the 3D view it is automatically moved half a meter or so. I'm not dragging or double clicking or anything half witted as that, but it is incredibly frustrating when i click on something and it moves out of position everytime.
View 3 Replies View RelatedIllustrator :: Can't Move Objects
May 27, 2013I keep getting this Error Message when i try and move something i have pasted into CS5.1."Can't Move the objects. The Command was Canceled" . It isn't locked. It's the only thing on the layer ( the layer isn't locked nor the image ).
View 5 Replies View RelatedAutoCAD VB :: Converting AttributeDefinition Objects To Text Objects On Same Layer
May 9, 2013I have several .dwg files that I use as templates. I run find and replace VBA routines on the template .dwg files, ie find $Flavor$ and replace it with "Grape", and then I save the .dwg to another directory with a new name.
These VBA routines work well for acdbText and acdbMText objects, but I have a bunch of AcdbAttributeDefinition objects in the .dwg templates as well.
After much research about the AutoCAD object model (I'm mostly a Microsoft Access VBA programmer), I have come to understand that these AcdbAttributeDefinition objects are actually "remnants" of a block that no longer exists in the drawing.
Anyway, I'd like to convert all of these orphaned AcdbAttributeDefinition objects to acdbText objects in the templates and then delete the AcdbAttributeDefinition objects. I have some code that does just that.
However, the issue that I am having with the code is that the newly created acdbText objects are not on the same layer that the original AcdbAttributeDefinition objects were on. I don't know the syntax to identify what layer the AcdbAttributeDefinition object is on or how to specify what layer on which the acdbText object is created.
how to keep the acdbText objects on the same layers as the original AcdbAttributeDefinition objects during the conversion and deletion process?
Here is the code I am using currently:
Sub AttConvert(dwg as string)Dim oDocument as AcadDocumentDim ent as AcadEntityDim aa as objectset oDocument = Documents.open(dwg) For Each ent In oDocument.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then' DO SOMETHING TO IDENTIFY WHAT LAYER THE ACDBATTRIBUTEDEFINITION OBJECT IS ON
' DO SOMETHING TO SPECIFY THAT THAT IS THE LAYER TO CREATE THE ACDBTEXT OBJECT ON Set aa = ThisDrawing.ModelSpace.AddText(ent.TagString, ent.InsertionPoint, ent.Height) End If Next ent For Each ent In ThisDrawing.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then ent.Delete End If Next ent End Sub
AutoCAD .NET :: How To Move All Of Objects In Drawing
Apr 13, 2011I have a program that creates a drawing. I want to move all of the objects (lines, blocks, arcs...) from one point to another. I was using the SendStringToExecute, but it doesn't seem to work. Here is the section of code I have:
Dim newCenterX As Double
newCenterX = (rightXCoord + ((leftXCoord - rightXCoord) / 2))
startpt = New Geometry.Point3d(newCenterX, 0, 0)
endpt = New Geometry.Point3d(0, 0, 0)
' Move the objects from newCenterX to 0
acDoc.SendStringToExecute("._move all startpt endpt ", True, False, False)
acDoc.SendStringToExecute("._zoom _all ", True, False, False)
This will select all of the objects in the drawing, but it just doesn't see the start point and end point. It just keeps prompting me to enter the start and end points manually. Is there a way to pass the variables to the command? Is there another way of moving the objects?
Photoshop :: Move Multiple 3d Objects Together
Jan 12, 2009expansion of the 3D toolset within PS CS4. It is *not* a 3D app, which is fine, but it does make texturing imported 3D objects considerably easier. It essentially simplifies the ZApplink workflow using ZBrush while maintaining your layers [rather than flattening to export back to ZBrush]
Now for my question...
I have imported 3 separate OBJ files as 3D layers. Is there any way to move all 3 objects on the canvas together? As it is, I can only move them independently which throws them out of registration with each other.
I have tried selecting all of the layers at once [shift-click] but the manipulation tools get nulled out. Same thing happens when I group the layers together. I am also not seeing any way to link the layers like you can with a pair of 2D layers.
[also... in order to get all three objects imported with the same scale and registration, I exported a pair of planes above and below each asset to create a bounding box.]
Xara :: Move Objects Via Centre?
Jul 19, 2012Is it possible to move an object by its centre and not the default origin of BLH corner?
I'm a CAD designer and I use XDP7 to accuratly register graphics to frontplates, but the current method of calculating the offset for each object is very tedious.
The selector tool info bar has a 9 square grid that a pop up says "Set Orign Position" but sadly this is for rotating only. It would be useful to toggle to colour of these squares to set both.
I know that XDP7 "knows" the centre of an object as the "Arrange" function uses it, but what I want to do is set an object origin to the centre and to be able to use the X Y "Position of Selection" numbers to move it.
3ds Max :: Move Objects And To Create In Other Position
May 4, 2011I have these problems.
1. when I creat a new object he stays at position 0,0,0 and I only can move when I transform in some editable.
2.this happend when I try to construct bones TOO, and I can create whitohou the zeros point, when I click the bones are creating in same point in viewport.
I all ready try to press x, see the snap toogle, dont like to be an Axis constrain, try to restar to default config.
AutoCad :: Move Objects Between Layers?
Apr 5, 2008how to move all the objects in a drawing to one layer so I can delete the other layers.
View 9 Replies View RelatedAutoCad :: X-REF Objects Move To Other Drawing?
Oct 22, 2012I have a weird issue with basic use xref in AutoCad 2012. There are two files complementary, (an elevation , one is masonry, the other windows). One is refering to the other with x-ref for a complete view (in overlay). From time to time some objects from the xref file are brought into the master file. This seems to happen randomly, like not all objects from a layer are moves for instance. These are usually blocks that are taken from the xref file. And when I discover them in the master drawing they are exploded too. So I have to clean my drawing up from all that scrap. It happen like twice a week.
View 5 Replies View RelatedIllustrator :: How To Move Objects To Grid
Mar 30, 2013How do I move objects in Illustrator, so they snap to grid? I can draw new objects in such way that they snap to grid, but I cannot snap existing objects when I move them around. Why?
--> I dont know what pixel preview is. edit>pref.>guides&grid show pixel grid is checked
-->I am trying to make my objects snap to the grid when I move them around, not just stay in a random place.
Illustrator :: Cannot Move Selected Objects In CS5.5
Oct 21, 2013I'm using Illustrator CS5.5.
I cannot move anything I select. I try to drag it and it makes the "bump" noise.
-I made sure that my preferences are not set to "object selection by path only".
-I've restarted my computer several times
-I tried to open a previous Illustrator file and I have the same problem
-I even uninstalled and reinstalled my entire Abode Suite beacuse I've been having several issues
I'm not sure if this is related but I also can't create a new document unless I use picas and CMYK coloring. It refuses to adjust to anything other than the default settings. Also, I can't increase the stroke of an object unless I type in the number, meaning I can't use the arrows for adjustment.
Illustrator :: Cannot Move Objects With Arrows - Ai CS5
Nov 4, 2013For some reason I cannot move objects with my arrow keys in Illustrator cs5. I can drag them and transform-move them but the arrow keys don't work.
View 1 Replies View RelatedPhotoshop :: Why Won't Move Tool Snap Objects
Dec 4, 2012Move tool was always snapping objects I'm moving before... What I meant by snap is, for example, I'll move an object right beside the left end of the document, it'll snap. And if ever I want to add a tiny bit of space between those two, I'll hold ctrl so it'll get rid of that 'snap' function.
Since the time I upgraded to CS6 Extended, It was working fine for a while. Until days ago, the problem started occuring. It won't snap anymore.
AutoCad :: Objects In Viewport Move When Resize It
Jun 24, 2011I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 Replies View Related