My Corel X5 file won't open but gives me the message "encountered an improper argument" or just freezes trying to open it. I tried installing Corel on a different computer but with the same result.
Is my file corrupt? Is there any way to (partly) recover the inforamtion in my file?
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedThis morning when I started Revit 2013 and tried to open a file that I was working on last night, I got this error: "encountered an improper argument." The file will not open.
I tried to open a different file, and I get another error saying "An unrecoverable error has occured. The program will now be terminated.... " Revit will close.
I cannot open any files, or get Revit to run. Is my installation corrupt? Do I need to re-install or is it possible to try a repair?
Usually I only use Edit Mode in X4.Recently I have been exploring Manage Mode and now decided to try Adjust Mode.I have found that everytime I leave Adjust Mode to go to Edit Mode or Manage ModeI get an error "Encountered an improper argument".
View 14 Replies View RelatedI'm trying to open a file to write to on my external drive, I get this message "bad argument type: stringp nil".
View 8 Replies View RelatedUsing Mac 10.7.4 and CS5 Extended on an Imac 27.Today, working on a large file PSD suffix and Photoshop froze. and when I restarted i got "unexpected end of file " error message on the file i was working on, but on several other files also in that folder.The file shows on the hard drive now as 118.6 megs.The files show up in Bridge, but with small Previews.
View 6 Replies View RelatedIn Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View Relatedwhen I open an image in Photoshop I get this error "could not import the clip board because of an unexpected end-of-file was encountered" how do I fix this?
View 8 Replies View RelatedError message: : Could not import the clipboard because an unexpected end-of-file was encountered. What does this mean, and how can I fix it?
View 6 Replies View RelatedI receive the following window:"could not import the clipboard because an unexpected end-of-file was encountered".
I delete the message and continue without any problems [that I'm aware of] but the message reoccurs.
While trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies View RelatedWorking in LR 3.6, Mac OS10.6.8, 8GB RAM, accessing from an external USB 2TB harddrive, and when opening an image I get the error:
"Lightroom encountered an error when reading a catalogue file and needs to quit.
"Lightroom will attempt to diagnose the problem the next time it launches."
I've run "Optimize Catalogue" and that didn't relieve the problem. Also have deleted preference files and still no joy. I also have upgrade to LR4 in hopes that it will fix the problem and it didn't. So I've removed LR4 for the time being until I can figure this out in LR3.
Here is a screen shot:
I am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
I was working on my wedding album and had half of it done. The file size is 2.08 GB -- huge I know, and every time I saved the file or the autosave feature came on it took several minutes. I closed the file and tried to re-open it but all I got was a blank standard sized page. The same thing happened with the back-up.
I desperately need to submit the album pages in the next 12 hours or I lose the money I prepaid with the printer. I tried renaming the file as a .zip and then went into one of the folders and opened the riffData.cdr file, but no luck there. I also tried opening a new CDR file and importing the old one, but that didn't work.
When I try to open a 17 MB CDR file, A.R.M. comes up and Corel crashes. I can open other CDR files fine.
WHen the ARM wizard finishes, I get this message:
---------------------------CorelDRAW X3: CorelDRW.exe - Application Error---------------------------The instruction at "0x0065007d" referenced memory at "0x0027f8aa". The memory could not be "written".
Click on OK to terminate the program---------------------------OK ---------------------------
is a very important file (I can't open the Backup file either).
I made a file in coreldraw x6 and unintentionally opened in corel X5. Obviously it didnt open. But apart from that, the file neither opens in corel x6 now!
It seems it cant be opened or something like that. But anyway it still sizes 2,94MB, so I am hopeful to recover it.
[URL]
When I open a CGM file with X5, I see my graphique and my text correctly. But after a save/close/re-open, I have problem with some letter like X, H, I, L or T. Extremities of those letters are joining and letters look like "greek" letters (After check, it's not a greek format). How to fix it without re-write all text?
View 9 Replies View RelatedHow to open .dmp file in corel darw.
View 2 Replies View RelatedI want to open a ".ecw " file in coreldraw x4. What is the process?
View 4 Replies View Relateda similar problem, I am running CorelDraw x6 64 bit on a win 7 64 bit 8 gb ram 8 core processor machine. One machine that I use have x6 64 bit on win7 64 bit and the other one x5 32 bit on a win7 32 bit.I saved the work in x5 x4 and x3 versions on this machine; but the files I 'saved as' never open in any other machine except on x6 64 bit/32 bit machines. I tried opening them in x5 32 bit on win 7 32 bit but the files are not opening. the x6 64 bit files saved in above versions perfectly open in x6 32 bit; but not a single file that I saved in on x6 64 bit open in x5 32 bit.
View 7 Replies View RelatedI can't open my cdr file. It was created in CorelDraw x5. I think it's because file is too much - 16 Mb.
It would be good if someone can open that file and save a part of objects in lower CorelDraw version.
I've tried many ways to open it, but I can't...
I can upload it to somewhere on the net and send link to download.
I´m trying to open a file that comes with a cd. Windows explorer tells me the file was produced with coreldraw 5. but when i try to open it coreldraw x6 crashes immediately (x64).
latest patch installed.
link to the file: [URL]
i´d be very lucky if you tell me with which version of coreldraw you were able to open this file and/or how to avoid crashing of coreldraw x6 on my computer.
I working in a file which contains 12 photograph cut with 12 letters a simple file.. and cannot open. I clik in open (open draw window) and it is´nt working.
View 2 Replies View RelatedRunning X4 under Win7 and it always goes back to the last file I was working on when I go to the Open dialogue. It insists on going to the Libraries Directory on my C: drive and 99% of my files are stored on my H: drive. Sometimes it's easy to get out of, other times I can't back up at all. Is there someway to gte the Open dialogue to simply go to My Computer instead?
View 3 Replies View RelatedOften I have "stuff" outside of the actual "page" size, and I'm wondering if there's a setting in X6 which will show all content (as opposed to the page size) upon opening the file.
View 2 Replies View Relatedim having some trouble opening some DXF drawings. im not sure what package they have been drawn in but im trying to open in AutoCAD 2012.when trying to open is says improper layer name, then invalid or incomplete DXF input. these files all open in my other package Alphacam.
View 6 Replies View RelatedQ When I import an EPS file into CorelDRAW, and print to a non-PostScript printer, the output appears pixelated and unclear. Why?
A An EPS file is a Postscript (PS) file and meant to be printed to a PostScript printer. When printed to a non-PostScript printer, it will only print the file header which is a low resolution preview of the actual file. If you wish to print the actual contents of the EPS file to a non-PostScript printer, import the file it into CorelDRAW using the PostScript Interpreted (PS, PRN, EPS) filter.So, apparently it can be done, but when I try to import this file into my Coreldraw, there is no option to import with that type of filter that I can see. Is this something that is missing in v12? If v12 wont do it, is there any other way to import this file without it coming in all pixellated? Or is there another way to convert the file into a format such as .plt?
I am not being able to open a .cdr file in Draw. Its about 1.16 gb, I know its big but I didnt realise it has become so big, it has 18 pages now. It was working fine till yesterday. but now when i am trying to open it a pop up comes showing error reading file. I am using x4 in a 32 bit windows 7 with 4 gb ram.I have tried opening in laptop with 64bit windows 7 4 gb ram, it opened till 80% adn then a different error came which said - invalid object. I need to retrieve the artwork, i have worked on it for more than 3 weeks. The back up file also shows the same.
View 7 Replies View RelatedI'm trying to open an eps file in Coreldraw X5 and it's blank. Someone could try with illustrator? URl....
View 7 Replies View RelatedI recently opened a .pdf document into CorelDraw x5 using the pdf extension in available file types to find the file.
Now when i try to use the normal open command to open a file the cdr is not available in the available file types region, everything else is still there except CDR.
To open a coreldraw file now has to be done in file manager.
Some particular file takes very long time to open, even if the file size is very less.
View 10 Replies View Related
