when I open an image in Photoshop I get this error "could not import the clip board because of an unexpected end-of-file was encountered" how do I fix this?
View 8 RepliesError message: : Could not import the clipboard because an unexpected end-of-file was encountered. What does this mean, and how can I fix it?
View 6 Replies View RelatedI receive the following window:"could not import the clipboard because an unexpected end-of-file was encountered".
I delete the message and continue without any problems [that I'm aware of] but the message reoccurs.
I cannot open photoshop files anymore in photoshop CS3. i get the 'could not import clipboard because an unexpected end-of-file occurred' I have purged the clipboard but no joy. I have an Acer Aspire 5750. Can't even open a New file let alone existing ones.
View 9 Replies View RelatedUsing Mac 10.7.4 and CS5 Extended on an Imac 27.Today, working on a large file PSD suffix and Photoshop froze. and when I restarted i got "unexpected end of file " error message on the file i was working on, but on several other files also in that folder.The file shows on the hard drive now as 118.6 megs.The files show up in Bridge, but with small Previews.
View 6 Replies View RelatedI just started using LR4.3. After importing about 1000 photos and establishing my collections of chosen images, I noticed that every image had the same settings already in the Basic panel. These are temp:5500, tint:4, exposure .28, contrast: 24 and Vibrance: 6. All other settings are 0 or some other LR default. I do not recall telling LR to do this on import, and in fact, don't know how to do that. Am I forgetting that I did that? Also, I set preferences to use the default specific to my camera serial number. MIght LR be making these settings based on that selection?
View 6 Replies View RelatedMy most recent photo import in Lightroom 4 unexpectedly changed destination. All previous imports appear in the LR "Folders" panel by date. This one appears under "Desktop" in that panel and places a blue folder of the images on my computer desktop. I do not want this! I deleted the images from lightroom, placed the folders in the trash and emptied it in order to attempt a re-import in the Folders location. LR said the files could not be read. It will only import the images as separate, dated folders appearing on my desktop. I did not purposefully change anything. Can I move these two dated folders into the Folder's column and get them off my desktop?
View 2 Replies View RelatedWhile trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies View RelatedHow do I import the clipboard in PSP Pro X5? It was one click in PSP 3.
A highlighted window is written to the clipboard by pressing alt+PrtScn keys. I bought new PSP Pro X5 for my new Windows 8 Dell XPS machine.
I am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
Â
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
My Corel X5 file won't open but gives me the message "encountered an improper argument" or just freezes trying to open it. I tried installing Corel on a different computer but with the same result.Â
Is my file corrupt? Is there any way to (partly) recover the inforamtion in my file?
I used to have all my photos on an external hard drive along with my lightroom catalog file. I recently transfered them all to my main harddrive on my imac and linked them and everything so they all show up and i can access them. However now when i try and export them they are saying "An unexpected end-of-file occured" and thats it. Also some of the photos have like a ulticolored streak through them and what not. They where literally working before i moved them...
View 1 Replies View RelatedI somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedWorking in LR 3.6, Mac OS10.6.8, 8GB RAM, accessing from an external USB 2TB harddrive, and when opening an image I get the error:
Â
"Lightroom encountered an error when reading a catalogue file and needs to quit.
Â
"Lightroom will attempt to diagnose the problem the next time it launches."
Â
I've run "Optimize Catalogue" and that didn't relieve the problem. Also have deleted preference files and still no joy. I also have upgrade to LR4 in hopes that it will fix the problem and it didn't. So I've removed LR4 for the time being until I can figure this out in LR3.
Â
Here is a screen shot:
I have a variety of layers which i require to
save out as resized, new files.
I select te layer portion required [all other layers off]
I then paste to clipboard.
select File>New
and in theimage size menu, ordinarily clipboard is hioghlighted.
For some reason the clipboard optioion is greyed out.
I have completed one save out successsfully today using this method
bit now my (30day CS copy)setup wont accept this procedure.
I recently built a new PC dedicated to my photo work.
i7 2600k, 16gb DDR 3 ripjaws, 128GB crucial m4 SSD, (2) x 1TB 7200 HDDs (mirrored), Sapphire Radeon HD 5570.The first month or so of use LR worked great. However, recently I have been getting several errors and oddities.
Â
1) Randomly closes. I can restart it without a problem and pick back up where I left off. There are not warnings or signs that it is about to close.. it just does.
2) "Unexpected end of file". Unable to edit photo. Preview does show, however. I have never seen this error before on other machines.
3) Memory dumps. I assume this is related to LR3 as that is the only program I am actively using when it happens (Chome is always open as well, however) I will have the dump files examined to know for sure.
4) Something new that just started today. In the preview bar on the bottom, as I scroll through the photos I see the previews of other photos.. some photos from other folders I took weeks or months ago. When I hover over the image it changes to what it should be.1 with a photo from this particular shoot and one from one I did over a month ago. Everything I scroll back and forth (rapidly or not) as the previews load it loads the wrong files first, multiple times (around 8 or 9 in a row) and then they slowly change to what it should be.
I am not sure if I am properly describing this error but it is really weird.Also, this seems to only happen on the images off a CF card. I was borrowing a friends D200 as a 2nd body for a party. When I scroll through the images off my SD card I do not see the issue appear. When I get to the CF portion of the folder is when I see the problem..I just updated LR today but these issues occured prior to the update and still exist afterwards.
Â
Do I need to do a fresh install of LR?What precautions do I need to take in doing so to insure my catalogue stays intact?
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies View RelatedI am having a strange issue with a specific file. If I copy to clipboard any element in this file it locks up. If I wblock the drawing, it locks up. If I open a blank file and select an element and drag and drop it in to the new blank file, it works fine.
If I copy to clipboard the droped element in the new file it works fine. It is local to this one file. This one file is most probably a 2008 file originaly, opened and saved to 2012.
What gremlins should I look for from older verstion to newer version that would cause this issue?
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
View 2 Replies View Relatedwould it be possible sometime in Paint.Net to save/export to the clipboard the history box as a text list of what we did ?
since I use many effects and settings in a given PDN, I sometime wants to write me some notes about how i did something and the steps i used to do it, before my old memory lets me down.
I know that the PDN it self has the history, but now I need to go over all the list and manually write/type down in notepad the list , which most of the time is very long.
Having the ability to save/export the history box text to a file or to the clipboard, make it easy to edit the list and keep track/notes of steps and ways to do something.
I don't need the settings used in the effect/adjustments , but just the TEXT names of the steps taken as shown in the history box.
Photoshop V10.0.0 will not open. It crashes as its loading the Twain drivers at start up. I am running Windows XP.
I've tried deleting the preferences file, reloading Photoshop and, as a desperate measure, deleting and reloading CS3. Nothing has worked. I tried upgrading photoshop but still no luck. Set my default printer to PDF, still nothing. Disabled my firewall, still nothing.....
The worst bit is its been working quite happily since June 07 and then in late Nov early Dec it decided not to work. I also had a printer problem during this time and reinstalled the printer software, but photoshop wasn't working before I did that.
The error I get is:
Adobe Photoshop CS3 has encountered a problem and needs to close
Error signature App Name: photoshop.exe
AppVer 10.0.0.0
ModName: unknown
ModVer: 0.0.0.0 Offset 0.0.0.0.0.0.0.4
when I was trying to save an image as a PNG, I pressed save then clicked OK on the small PNG Options / Interlace box and then the program completely crashed, encountered an error and needed to close. I tested saving things as PNG and it happened over and over again. It's only happening with PNG, not with any other formats. Can anybody please help? PNG is a format that I need to use and it is becoming very frustrating! I don't know if this help but the Error signature says:AppName: photoshop.exe AppVer: 10.0.0.0 ModName: png.8biModVer: 10.0.0.0 Offset: 00001f44
View 3 Replies View Relatedmy CS2 shuts down when I try to open a raw file and sometimes in the middle of editing an image without warning and without saving any changes. I purchased a new Dell computer hoping it would solve the problem but it didn't. It's still happening with this new $6000.00 computer running Windows XP Pro. Is this a known issue and would an upgrade to CS3 resolve this matter?
View 1 Replies View RelatedI get an "Online Services encountered an error" message when I try to upload a video to Facebook or YouTube. I use Adobe Premiere Elements 10 on a Windows 8 machine
View 1 Replies View RelatedI bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install it I introduce the cd, accept and after it copies the files, appears "The installation failed" The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
View 4 Replies View RelatedHeres all my system info.Â
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
I have PS CS3 on a older laptop. I have been trying to download the disk on a newer laptop. I keep getting Setup has encountered an error and cannot continue. Internal error 2739. how to get the program downloaded?
View 6 Replies View RelatedHow can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedI know there is a recommended way to use PSE catalog backup to transfer a catalog to a new pc [URL] This is fine for when I have planned to move to a new pc.
Â
But what about if the move to the new pc is unexpected (such as after a loss of the pc or the pc stops working)? In this case, I would have an up-to-date backup of the old pc (because this is done automatically on a schedule), but would not have an up-to-date backup of the built in PSE catalog backup (because it is not automated).
Â
How do I use my regular drive backup to restore the PSE catalog to the new PC, whilst preserving my albums?
When I create a project mit chapter and and want burn it in Blue-Ray disc, than comes error 5:0:0. Without chapter I can project burning perfect.Already destroyed many Blue-ray discs.
View 12 Replies View Relatedover and over i keep hitting this wall when stitching my edges together while unwrapping - what this is or how to fix it?
View 2 Replies View Related