we have an old Docucolor 12 that runs with a Fiery X12 printer server. After we upgraded to Corel Draw X5, we are no longer able to add this machine as a scan source. I found similar posts for Draw X6 stating that it might be a 32bit/64bit problem. Woud that be the case for X5 too?
View 1 RepliesI have been using PSE 10 on my MacBook Pro with 4 GB memory (RAM). Today I upgraded to 16 GB but PSE still displays available memory as 3072 MB. What can I do to make it use the extra memory?
View 4 Replies View RelatedIn my part, there was already an existing Engineering note.
I wanted to add another note. I added my new note, but it does not show up in the browser. I can right click on the note note > Display note and both notes are shown in the engineering notebook. When I exit out of the notebook and go back to Inventor, still not there. Here is a short video of what I am seeing.
[URL]. The "Rev B" noteis the original one and Note 2 is the one that I just added.
Now I if I add another note, then all of them will show up in the browser. This is not the first time that I have seen this, but just thought I would bring this up.
This part was just made with a copy design from Vault. What is weird, is that if I go to the part that this was copied from and add the note, it shows up correctly then. Its like something is getting hosed in the copy design process.
When I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies View Relatedi am new to LR with LR4 upgraded to LR4.1. I can import images from my hard drive photo folders but LR won't let me reorder them. I get the message "The currently selected source does not support custom order". Why is this? I find it strange that such a sophisticated product as LR doesn't allow the user to move images around within a folder, especially when it can be done easily in Bridge.
View 2 Replies View RelatedI would like to find instructions or a tutorial on how to achieve this type of effect: [URL] ......
I've found lots of instructions and tutorials that deal with fiery or glowing text, but I've not found anything along the lines of this image.
I just had to replace an computer running xp with one running windows 8 and after installing X5 I find I cannot scan any more. I see some posts about X6 on this but nothing about X5
Canon MX870 and I did download the 64 bit drivers for it.
Cannot Scan with either Corel draw x6 / Corel PhotoPaint. The icon is not highlighted
View 15 Replies View Relatedwhy I am unable to print text added to an image in X5? Everything else will print but any text added will not show in separations nor print.
View 1 Replies View RelatedI am using Coreldraw X5. Previously I had corel x3 now there is problem with the new version of corel the color display is not proper that is the colors yellow appears to be deep yellow in corel x5 where as if I save the file & open it in corel x3 the yellow color appears properly. I mean to say that there is always a darkish tone added to all colors in corel x5. Both corel x3 & x5 are on the same PC as I am facing this display problem I have to switch back to X3.
View 7 Replies View RelatedIs it possible to have Lightroom rename the source images according to my custom naming convention?
I just imported 278 photos and they are all correctly renamed within Lightroom however the source files retained the original Canon generated names. I want to rename them for backup/in case I ever decide to stop using Lightroom/etc.
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
slow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
View 3 Replies View RelatedHow can I make an imported scan of a line drawing "transparent" and add color fills to various sections, using the freehand tool ? I have done this many times with an older version of CorelDraw, but in CorelDraw- x5 the
imported scan includes a white background (even when I select NO FILL), so that my freehand tool selections are either on top of, or hidden behind the white background.
It makes very serios color shift. how can I prevent this.
View 5 Replies View RelatedI need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedTrying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
When I want to add page numbers, I only get a number on page One (or on whatever page I'm on) and nowhere else. I tried everything. When I go to Page Number Setting and change it to start at page 2 and want to add page numbers to all pages, nothing happens if I stand on page 1, or I get a number on whatever page I'm on. But only there. Am I supposed to do all pages one by one?
I remember using this function before, not sure which version/update but it worked. Not sure why it's not working anymore.
When I open previous artwork files, to maintain or update, one of my fonts disappeared. Coreldraw does recognize the font when I open the artwork file, but within the artwork the text in this paticular font is blank. It's called Trajan Pro. All my other softwares recognize it and I can use it, except in Corel. Not sure how to get this fixed, since I never had this problem before.
View 2 Replies View RelatedThe dialogue box for Uniform Fill is not opening.
So I am posting a video here: [URL]
I have been upgrading to X6 from X5. I wanted to install a CorelDRAW macro called "Function Plotter", written by Alex Vakulenko, into X6. When upgrading from X4 to X5 I just manually placed a certain file (Plotter14.gms) into the Draw GMS folder in the program directory. Then back in CorelDRAW X5 I choose Tools > Options > Customization > Commands in order to place an icon in the toolbar, making access to the macro. It worked back then. However when I try the same procedure in X6 it doesn't work. I can see the file under "Commands" and place an icon, but nothing happens when I press the button. Maybe it has something to do with 64 bit, which from what I can see in this Forum causes a lot of trouble (scanner drivers, plugins, etc)?
This macro is extremely important for me. I have tried contacting Alex, but with no success so far. In the meanwhile I need to install X5 again..
When i click the arrow onto my container, a shape or letters for instance, my image just disappears. i do the exact same procedure in corel x3 and it works so it not user error.
View 6 Replies View RelatedWhy Corel Draw does not preserve original JPG size defined ie. in Photoshop.
Instead I think Corel Draw looks at the DPI and then maybe opens it as native monitor dpi I don't know but I spend ages to make JPG to size in PS to them make layout in CorelDraw and it was all wasted because I need to resize them back in CorelDraw.Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
I've seen many messages about this problem, for people using Corel X5 (and maybe X3 and X6) and Windows XP.
You double-click on the .CDR file name, but instead of the file opening, you get this error message:
If I drag the file to CorelDRAW, it opens. Same applies to .JPG and other files associated with PHOTO-PAINT.
I love CorelDRAW, but I'm convinced this is a BUG that seems to be ignored. It's been around for years. It's basic to how Corel works and works with Windows--I don't understand why they don't fix it. This is quite an annoyance; the good thing is I can always open the file by dragging it.
CorelDRAW version is 15.2.0.695. WinXP is Professional Version 2002, SP3. Found no answer in the Corel Knowledgebase. Never had this problem with CorelDRAW v.2-12.
I used CorelDraw X4 to Open several 48 page PDFs (File, Open, open the PDF.) The PDFs consist of 6 images per page in a grid - no text, nothing fancy. Everything works great, except that in the CDR files that were originally created by openening the PDFs if I drag one of the original photos or any object that I've drawn in CorelDraw on one of the pages to the desktop, it doesn't move to the desktop layer as I'm used to but instead stays on the page layer for the individual page it was dragged from and thus is only visible when the original page is up even though it's outside the page area unless I manually change its layer (I ususually use the desktop as a quick way to move objects between pages faster than using the clipboard.)
This is probably something silly, a setting that I've never used -- how to make it so any object dragged off the page to the desktop area is moved from Page 1 Layer 1 for example to the Desktop Layer so it's visible to all pages, and can then be dragged form the Desktop to Page 2 Layer 1 for example.
When I export a logo file to EPS it doesn't get the same size a the cdr-document. For example my document is 250 mm x 120 mm with a black background but when I open the EPS version of it in Photoshop the document is 330 mm x 120 mm with a 250 mm black background and the rest is transparent.
View 4 Replies View Relatedpiral tool doesn't look right? Or is it a math bug?
View 8 Replies View RelatedHalf the time I use TRIM tool vector on top of vector it doesn't work.
I can't seem to figure out why in some cases trim works and in others it simply puts the top object under the bottom one instead of trimming it from the bottom one.
Does same thing in X3 X4 and X5?
I've tried everything from making sure both were filled with solid color - all curves closed, nothing else grouped with them - nothing - sometimes I have to try a couple times doing same thing and it will work, other times not at all - even after trying a save (which sometimes works)
Both top and bottom show on layer one in properties too!
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I used to have x4 . One of the features I like is wherever you place the cursor and use your the scroll wheel on the mouse, it will zoom in where the cursor is.
When i switched to x5 , it doesnt center to the cursor. Is that a glitch? is there a way im doing it wrong or any setting i need to fix?
When I save a Corel X5 file the thumbnail doesn't show an image like it did when I saved a corel file in X3. It shows the green pencil symbol .....is this normal?
View 8 Replies View Related