CorelDRAW X5 :: Strange Freezing When Moving Objects
Oct 18, 2012
I suppose when you open a file in Corel draw, it is loaded to RAM and apart from cases when the file is autosaved or backup is done etc it should not depend on actual drive on which the original file is saved.
However I have very often problems recently with corel freezing for some time when just trying to move even small object inside the file. I am using network drive and write speed on it is not the fastest but still 25MB per sec. I am thinking of upgrading to 1Gb but my crucial question is:
Is it at all possible that internal work within a document is somehow dependant on connection speed with the drive? It doesn't happen all the time but when it happens there are no processes in the background that could possibly affect the Corel Draw performance.Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
View 3 Replies
ADVERTISEMENT
Oct 4, 2011
So I can do a reflection in Corel fine, as long as the bottom edge is straight and flat. I work for a beer distributor, and I want to know how I can reflect some of the packages realistically. The angles are strange, so if you just mirror it down it looks funny. Check out this picture:
I want it to look like the bottom one, but ya know, upside down. If I just mirror it it looks like the middle one.
View 8 Replies
View Related
Jan 25, 2013
I often need to move (a group of) objects on a page, but with those objects I also need to move the guidelines that belong to this object. Is there a way I can lock guidelines to an object so that if I move the object, these guidelines move with it?
View 5 Replies
View Related
Dec 9, 2012
How can I stop the program from automatically moving my pictures to strange locations when I edit them? They used to appear right next to the originals.
View 1 Replies
View Related
Mar 16, 2013
Today i started to experience this crash while moving multiple grouped objects. These objects were from a powertrace and had transparency. this is on vista 64bit. doesn't happen all the time.
Problem signatureProblem Event Name: APPCRASHApplication Name: CorelDRW.exeApplication Version: 16.2.0.998Application Timestamp: 50b2a2e4Fault Module Name: CdrTra.dllFault Module Version: 16.2.0.998Fault Module Timestamp: 50b2a50fException c0000005Exception Offset: 000000000003b757OS Version: 6.0.6002.2.2.0.256.6Locale ID: 1033Extra information about the problemBucket ID: 94246814
View 10 Replies
View Related
Sep 17, 2013
I've been exploring migrating my Design and PrePress departments away from Illustrator & Flexi and transitioning to Corel. Unfortunately I've hit a major stumbling block
Right now I have a team of designers laying out sign designs. They draw each sign and we generate a message schedule for those signs in excel. From there, we've been able to use the print merge function in Corel to transfer all the messages from the data sheet to the signs. The problem is, each sign is placed on a separate page within the Corel file. I know you can then use print imposition to gang those signs for printing...but the problem is we have a laser engraver, rotary engravers and routers that are all being run. I've fairly certain we could "print" to the laser without any issues but I'm not as confident regarding the other machines.
Typically once we have the drawings of every sign created (currently doing this in Flexi), we have programmers that gang all similar components together on files that are used to power the rotary engravers. Because the print merge function in Corel puts each sign on a separate page, I'm not sure how we'd be able to transition without having to copy, paste and place each sign back on to a single page. Our jobs often run into the hundreds of signs so the extra labor required would kill any savings such a transition might bring us.
Is there a way to combine pages post print-merge, to get all the objects on a single page? I had really hoped to be able to gang all objects together on a single page within a single file.
View 3 Replies
View Related
Sep 27, 2011
How can set that an object only moves per 1 pixel increments when moving using the arrows keys?I am designing a few web banners right now and when i move objects with the arrow keys to have them placed exactly, they jump with more then 60 pixels in one go making this exercise a bit useless.
View 3 Replies
View Related
Apr 21, 2011
we are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
View 4 Replies
View Related
Nov 13, 2012
CDR X6 leading.PNG
There are years since I worked in CorelDraw. However, recently I got a project from a client. I have to implement 14 languages translations into a document. The work is, so far, Copy/Paste from MS Word, paragraph by paragraph. I didn't find a better way, yet.
At a point I run into a problem. Inside a Paragraph Text frame the text has a strange leading, or something (See attachment).
View 6 Replies
View Related
Mar 26, 2010
When I try to import a file it freezes up. It doesn't even give me an option to select type of file. It pulls up the screen where you would be able to but freezes and will not let me do anything. I use Windows XP.
View 3 Replies
View Related
Apr 8, 2013
Whenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies
View Related
Nov 5, 2013
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
View 7 Replies
View Related
Aug 30, 2013
I recently started a trial for a program called PDF2CAD, the test file I converted worked fine. Everything is selectable and editable. When I move something it does show up while moving/copying. However, when I make additions to the drawing, text for example, and try to move/copy it it does not show up while moving.
PDF2CAD converted the PDF to a DXF format, which I then saved as a DWG.
DRAGMODE - Auto
DRAGP1 - 5000
DRAGP2 - 10
HIGHLIGHT - 1
View 9 Replies
View Related
May 31, 2011
I'm working on this massive architecture scene and i'm trying to move some rather small braided steel cable in the scene when i go to move it the objects moves in rather big increments instead of small ones. I check to see if snaps was on and its not, on what i can do to can more precision over my placement of these cables.
Custom Core i7 at 3.99 GHz, 8 gb ram, Nvidia Quadro FX 3800
View 2 Replies
View Related
Apr 14, 2011
I just started on the roof of the round house I'm working on. I use spacing tool to copy shingles around but now I'm thinking is there an easier way. This takes time. Can you think of any? I was always missing one "tool" in MAX and I think there probably is one. You know when you select many objects and use scale to scale them all (using one center, not each owns), and the objects move as if they are pieces of explosion or implosion (towards or away a centre). But also, they change size of course. Is there a tool or a way to just MOVE the objects this way? Away or towards each other but not scale them?
View 2 Replies
View Related
Jun 13, 2012
I used to set precision to 3 decimal places which is in millimeters in my case. That is enough for the building industry. Recently, I found out a co worker worked on my drawing while I was on vacation. Something seem out of place, so I set the precision to 8 decimal places and noticed everything is off by a bit. In general, 0.00000002 isn't going to affect the project, but it just bugs me a lot. I spent hours lining everything up perfectly, just to find out most objects shifted again by a tiny bit after 2 days.I tested out a few lines by fixing them in the block editor and saving it. But everything I reedit them, they shifted again.I asked the co-worker if he remember what he did, but couldn't come up with a solution.
View 9 Replies
View Related
Apr 16, 2013
So I am working on a very large project (AutoCAD Architecture 2012) and when I rotate my view, some of the 3D objects will randomly fly out into space. The strange thing is that the grips for the object are still where the object needs to be.
Below should be a picture to explain what I'm talking about.
Grip error.jpg
Is this a bug? Is there a fix? Is this user error?
View 5 Replies
View Related
Apr 26, 2013
I am using Autocad 11. I am working on some 12 year old drawings for a railroad museum. They are a mess. They look like they were done be an old pencil guy. Lots of views all over the drawing space rather than using layers to his advantage.
I am watching all the tutorials that i can find. There are Blocks on wrong layers.
I want to move a group of lines (part of the stuff on one layer) onto a new layer that i have created. Is it as simple as cut and paste? How do I prevent them moving during the process?
I tried making their layer current, then selecting the items, then cutting the items. Then i made the new layer that I wanted them on Current, then pasted them. I has to very carefully line them back up, and they are still on the original layer.
View 3 Replies
View Related
May 16, 2011
I notice that, for example with the the text creator, you can move the text around the canvas before it "freezes up" so to speak
How can I move text, or an object, around after this happens
View 3 Replies
View Related
May 12, 2012
I'm trying to simply move an object as usual but rather than moving it, a grey box appears and nothing will move.
Looks like this..[URL]...
View 7 Replies
View Related
Jul 19, 2013
In cs6 if I have two objects in a group I just select one and move it. In CC it moves all of the objects in a group.
View 1 Replies
View Related
May 30, 2012
I'm a new user of VideoStudio X4 and I looking for information about moving and resizing objects or images.
For example, the Star Wars sequence where the Star Wars title passes from back (very big title) to infinite with downsizing, not the long scroll text, only de main title.
View 3 Replies
View Related
Nov 26, 2012
I found that Photopaint X6.1 is very unstable when i'm trying to move objects down or up.
Bad news is that its happening after longer period of work like around hour or more, designs with hundred or more objects.
90% of "not responding" errors are caused by moving objects down or up.
With X6 64bit I learned to save files more often than in previous versions.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
View 2 Replies
View Related
Mar 16, 2012
Somehow I must have activated an option to only be able to move any object a certain distance at a time. For example, I have a circle that I want in a certain position but I can not move it there with my mouse. Instead it insists on moving 18,9 pixels in any given direction whenever I'm moving it with my mouse. To get a specific position I have to enter its position manually.
View 4 Replies
View Related
May 17, 2011
I just upgraded from ACAD 2007 3d to 2012 3d. The rest of my organization is using a "mix" of older versions, so we still save to the 2004 format. Text objects "moving" to different locations or disappearing on opening files in newer versions of ACAD? I've had two instances so far. In one case, a 2012 LT user added a leader/text and the 2000 LT user could see it. The text was clearly there in the 2012 users file. In the other case, I opened a file I worked on in 2007 and text objects seem to be moved about randomly when looking at it in 2012. Everything still looks good with the file opened in the 2007 though.
View 4 Replies
View Related
Sep 23, 2012
I have 3ds Max 2012 and I am trying to do a simulation with mass fx. I am trying to do a simulation where a minecraft character (dynamic object) is walking and then gets hit with a small box (kinematic object) causing him to blow backward into his seperate pieces. My problem i encounter during this is I cant run the simulation unless the parts of the Character are a dynamic body but when i bake the dynamic body it just erases all the keyframes i already had on the minecraft character.
View 1 Replies
View Related
Aug 10, 2012
I am using Revit Architecture 2013 and I have a few different design options for the mian level of a house I am working on. I have the North wall of the house in a design option for the living room at the moment. But I have decided I no longer want that wall in the my living room option, I would like to move it to my kitchen design option so I am able to move a window that is located on that wall. I cannot seem to find a way to move a wall from one design option to another or have it in both if it is already part of a design option. How I can get this wall and the windows located on it into my kitchen design layout without having things being double counted in the schedules?
View 6 Replies
View Related
Aug 7, 2012
I'm using Revit 2013 and recently installed the Update Release 1. After the Update I am running into an issue when I selct any element, my screen flashes 2-3 times and then the element is automatically moved to the North. It's as if every time I select an item it defaults to offset.
View 2 Replies
View Related
Jul 16, 2012
Can you move an object while using another object's snap points?
View 4 Replies
View Related
Sep 14, 2012
Is it possible to move a wall to a different object style?
Im currently setting out a toilet suite and would like to place the cubicle partitions in a more appropriate object style.
View 5 Replies
View Related
May 19, 2013
I am still having trouble moving objects to precise coordinates. For instance, the thing I drew may be in the correct position in the x-y plane but I want to move it in the positive z direction a precise number of units. Or move it along the y axis by specifying where I want it to be not how far I want it to move.
I see...just use the tab key.
View 9 Replies
View Related
