New to Corel Draw X5. I recently switched from X4 (on Win XP) to X5 on Win 7. I have over 1000 files I created with a CutPath outline. I open the file - assign the new Cut Path outline I created in X5 (didn't know how to import it from X4) and after a few minutes the cutline turns white and I have to keep re-doing it.
Also, quite often the palette I created disappears and I have to keep opening it up when I open new documents.
I am taking an online coreldraw class involving the rendering of a baseball with two opposing three-point curves.
Where can I find the button for the tab labelled " Outline width" or "outline pen window".
Since uprading to X5, virtually every file with text that I open has a problem. All text (artistic or paragraph) is visible when selected with Pick Tool but when Text Tool is selected, the text "disappears" either partially or totally. Very difficult to edit! Invisible text areas can be highlighted but not seen.
On the same page, when editing different different blocks of text, some have become totally invisible, or, just at the bottom of a paragraph, or just as a strip down the right hand side of artistic text (almost as though a white box was placed over it). Where there is a red underline, indicating a possible spelling mistake, the red line is still visible althought the text is not!
It is invisible in any Text Tool View - Enhanced - Wireframe etc.
Text reappears if I click on bottom middle handle (eg to flow to another paragraph) but as soon as released, it disappears again.
Ctrl W works rarely and only partially. I have tried different basic fonts with exactly same results. (eg Arial, Times NR)
Select text with Pick tool and there is full text again.
In the nature of my business I hardly have a file without text in it!
Artwork disappears when zooming in and out in corel x6 then have to close file and reopen
View 10 Replies View Relatedim using corel x6 on win7 x64 i have some critcal issue on some arabic fonts spacially word ALLAH (الله) when im writing Word ALLAH in Arabic its disapears.
View 1 Replies View Relatedevery time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.
View 5 Replies View RelatedWhen using Windows 7 (32 bit) and Coreldraw X5, when I zoom up the page, with grid on, and start moving TIFFs around, the grid disappears in that local area. The only option is to refresh the page. So just recently upgraded to Windows 7 64 bit, but no change.
View 1 Replies View RelatedAfter intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
I have just run CC Cleaner and Glary Utilities , which we have been running for years , and every time it removes the Edit Bitmap link menu, in other words it greys out.
How can you edit the bitmap in Photoshop ? And get it the edit Bitmap menu functioning ?
when I try to change the font in corel draw x4, the text disappears, this happens with new documents, old documents etc.
It works in Photo Paint, but for some reason draw has stopped working. I restarted and tried everything I could think of!!! This seemed to happen after the latest windows 7 update.
Also on a sidenote is it possible to get rid of the ads when i start up Draw and PP x4? It keeps hassling me to upgrade. It is really really annoying... seriously I bought this product, why does it have pop up ads???
When I crop a cdr image, part of the image disappears within the crop window. Clicking inside the cropped image reveals node locations as if the image is still there but the black lines are invisible. But, there are some objects visible in the cropped image.
View 3 Replies View RelatedI have designed a very large document (a magazine) in Corel Draw 11 with text, drawings and photos. I started converting the text to curves but there's a couple of text columns that disappear when I do so !
View 2 Replies View RelatedX4. When I add a drop shadow to anything the variable attributes do not appear on the property bar, ie "flat bottom right" at top left and then the choice of colours etc. I know by now where they are so click on where I think they are, but it's annoying. I have deleted, run a reg cleaner and re-installed + added the SP2 updates.
View 3 Replies View RelatedI'm using coreldraw to engrave words with my laser machine, which is a Epilog TT24. im trying to get a thick outline on the letters so i can paint it, but so far the only thing my laser engraves is the "hairline" outline even though i tried all the other sizes. How can i get it thicker?
View 2 Replies View RelatedI find corners and line caps in outline properties in CorelDraw x6.
But where is POSITION, like in previous versions?
I want to create outline inside object.
Behind fill is not what I want.
how to outline a word so it can vector cut on a laser engraver. I am using corel draw x5 and I am trying to put "COWBOYS" on a piece of wood and I want the letters connected so it is one piece of wood. Whenever I spell cowboys I can't configure it as hairline (to vector cut).
View 16 Replies View RelatedI'd like to ask if it is possible to change colour of outline according to filling. I've traced the raster picture (outline tracing) and there is no outline and the picture seems to be disturbed by tiny white lines. So I'd add hair outline and I'd like to have the same colour of the outline as is the object. Is there any function what is able change it at once and all at the same time?
View 6 Replies View RelatedIs it possible to convert outline to object in the adobe reader ?
View 7 Replies View RelatedOutline.cdr
I don't know what's wrong with the outline that I get this result.
In Coreldraw X6 just say you draw a box , now you can fill that box with any color or gradient but how can you make an outline more than 1 color? Is this possible with Coreldraw? is there maybe a macro or something that can be used.
View 4 Replies View RelatedI use this combo all the time for getting the fill I want from another object.
Is there a combo for getting the outline from another object?
What i like about this is you don't have to deselect the target object as in Right Click and Drag.
Whenever I use a spot color with a black hairline outline and export it as an eps, the colors do not register right. If you select an object after importing the eps, the fill is blank, the outline shows up black, but the color is there.
If you import it into x3, it shows up as shades of grey for all of the objects that had outlines. However, I can import the eps file, remove the outlines, export it as eps again and all the pantone spot colors come through just fine. I -CANT- be the only one with this problem. Yes, I have done some research on it, and yes, I have ghostscript installed.
i want to create a sticker out of a simple black tribal design and it is an image edited with corel photo paint.but to cut the sticker i need to obtain its outline in corel draw.doing the job with the bezier tool is a tedious job and also i dont have any experience using drawing tools.but i need an outline as if it was drawn using a drawing tool into which i can fill color.
View 16 Replies View RelatedIs there a way to create a hollow circle (or ring) that has a fill, but does not actually fill the circle with the color, just makes the outline?
Here is an image of what I need:
I am having the above laser cut out of acrylic. The laser needs to have everything that is black use a Fill and no Outline. The way it is in the file now, there is no Fill on the circle, but there is a black Outline. If I tell it to have a black Fill and no Outline (like the laser needs) I end up with a solid black circle which the laser will engrave as a solid circle instead of the "ring".
In the old version of Corel that I had, when I drew a box with no fill and only an outline the only way to select that box was by clicking on the outline. There use to be an option at the top with the tools to change this option from selecting the unfilled objected by the outline only and not the inside empty part.
I'm now using Corel x5 and cannot find that option. Does it exist?
I have some artistic text, that I converted to curves. This artistic text, included outline which I would like to keep with the text. But now - I would like to apply a fill, to fill the entire creation, including the outlines, seamlessly. Basically, replace the outline color with the fill, and the fill itself - such as linear fountain fill.
View 7 Replies View RelatedI just installed X6 and I noticed in the status bar the width of the object I click on only shows up with black outlines. If it is a colored outline, it shows the color but no width. If it is black it will show the outline as black but also the width.
View 14 Replies View RelatedMy problem concerns about shadows of outline In fact, I want to create a soft, shaded border. Effect which I want to achieve can be seen in the picture below, basically it is a design of an soccer jersey.
I tried drop shadow technique but the result is too large and inaccurate shadow. Also, I tried to create an custom artistic media brush, but the result is not as I expected. Is it out of a job that Corel can perform ?
I am working in CorelDraw, drawing shapes and combining them with text.
Anyway, the problem I have, is that the colors of the outlines does not look like the fill with the same name! It is awful when you zoom in and see the differences in Color!
I want to work in RGB colors since I export everything to Photoshop.
[URL].......
Sometimes when applying outline to text, as we increase the outline thickness, certain holes in the text are not being filled up, no matter how thick the outline is.
Is there a solution for this? As I think it's not so nice with holes here and there.
what methods use to only partially hide the outline of an object but without merging the two objects together or breaking any of the two objects apart(?)..i want to rest one object on top of the other and hide portions of the outline where the two meet, something like this: [URL]
View 4 Replies View Related
