I am using now Corel Draw X5 for a month or two, basically testing the use and procedures and transferring my artworks from previous versions to X5.I have noticed a very annoying thing: on almost exactly 5th following command I use in a certain drawing, program stops for two or three seconds, then it goes on as there was nothing.I noticed this kind of behavior in previous versions of Corel Draw when I had larger bitmaps in drawing and program did often a backup. But here it's just not the case. I have relatively simple drawings, not larger than 500K.
It seems as if a program is waiting writing on a page file on scratch disk, but there is no reason: I have w7 64 bit and 8GB of RAM, more than enough.
Using ACA 2012, I get a delay when I switch drawings, either using ctrl tab or the mouse. The ACA pauses for a moment. I also get the same issue going from model space tab to a paper space layout tab. Running Windows 7 Pro on a Xi machine Intel i5 2.8 ghz with 4gig of memory and a geforce 9800 GT video card. I didn't have this with ACA 2008 prior to updating.
I have been using Corel x4 for sometime now and export many graphics. Everything works fine just like before but now on I would say 70-80% of my files when I go to export said file it will take up to 8 seconds for the Convert to Bitmap box to come up. I also have always had the "do not show the filter dialog" checked. Everything else within Corel and my PC is working at the same pace as always.
I told GIMP not to add a delay to my animated gif but GIMP did anyway and now my animated gif is really slow. How can I prevent GIMP from adding a delay to my animated gif?
[URL]....
[URL]....
Edit: How can I save my project without losing my layers so I can work on it again later?
My project is 11-minutes long. There is a lag of around 10-seconds when I am on the timeline and hit <space> or press [>] on the preview control. It wasn't like this when I started the project earlier today.
I've download Photoshop CS4 and running it in trial mode. When I use the brush tool for example, the delay in it actually printing on the paper after I click and drag is like 1-2 seconds. I have a pretty good PC, 2.4ghz @ quad.
On the tool bar (like where the dodge/burn, etc is). . .before I reinstalled - I clicked on a tool and it instantly opened. Now when I click on a tool, I have to hold my left mouse button down for a short delay. It is very annoying. Anyone know what I can change to fix this? The computer etc didn't change - did a fresh reinstall of cs2. . . Oddly, if I right click a tool - it opens instantly. . . but I never had to do that before.
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
When I start Photoshop my mouse works fine. Then I use the wacom pen of my clintiq hd that works also fine. But using the mouse again, the mouse clicks got a on second delay now. After restarting photoshop the mouse works normal again til I use the wacom pen. One use, and the mouse function is damaged.
Mouse and Pen work best together in other programs like Paint or InDesin. This one second delay of mouse clicks is a Photoshop-Cloud problem. I did not have it in CS3
I deactivated openGL, installed the newest wacom driver, installed the newest graphic card driver.... The whole System is new setted up with Win7.... Nothing worked. It is a Photoshop-Cloud-bug!
Is there a way to set Photoshop back to the start without restarting it? It would be useful to do it with one Click, when I need the mouse after using the wacom pen.
Also after running Photoshop for some time I start to get a nasty lag. Moving layers, using brushes, everything happens with a 1-2 second delay. Hardware should not be an issue.
If I restart PS lag goes away for a while but always returns. I noticed that closing images doesn't reduce the memory PS is using according to task manager. Every image opened just increases PS memory usage, is this normal?
For coping with RAW file picture, I would like to update my computer from PentiumD cpu+1g memory to i5 CPU+8g memory. However I still have a graphic card with Nvidia GT210 chip and 128M memory on board.
I just want to know whether the graphic card can cope with Photoshop and lightroom? I don't want the card delay the CPU when editing the RAW file in Photoshop.
I added subtitles to the video...but then there were a few seconds without sound (sound is fine before adding subtitles) all along the video sometimes.
When I first use the mouse to open a menu (Editor mode) it takes a while for redrawing the menu rectangle. Not a great deal because this only happens the first time I open a menu after launching the application. On the other hand, X3 seems to redraw menus just fine and fast.
In AutoCad LT 2013, on Windows 8, I experience a 1/5 - 2 second delay afte 'enter' on a Copy command. The enter may be used in either right-click command or spacebar modes. This is the only delay I am experiencing in any command used so far. Other than that, the 2013 is flawless in Windows 8.
I experience a delay when i want to select a line or curve in a scetch, part or assembly. Normally when you move the cursor over a line it highlites red within a fraction of a second. Now it takes 3 or 4 seconds to be selected.
is it a wrong setting or a bug. Never had the problem before. Not in 2012 or in 2013.
I have the Layer Property Manager and Properties toolbars docked on the left edge of my screen, with the Ribbon vertically between them and the drawing display. I sometimes 'overshoot' when going for a command from the ribbon and the toolbars pop-up immediately so that I then have to move the cursor back into the drawing space and wait for the toolbar to collapse before I can pick the command (more carefully). Is there a way of setting a delay on the tool bars appearing?
I already set the frame delay to 0secs but when I "save as web design..." but when I save it as a .gif after this step, viewing in FIREFOX browser, the animated gif is not the original speed. It has some delay.
About six months ago, when I ctrl/tab between drawings, it started having a five second delay for it to "reset" itself. Irritating as all get out. Nothing had changed on my CPU, just started doing this out of nowhere. My boss, who has exactly the same cpu / software/everything, is not experiencing this. I am using 2012 full version.
Another question, my co-worker had 2012LT on his laptop and when he is measuring a distance and take off either the ortho or snap, the text box on teh screen showing the distance disappears.
Ive recently started having a problem w Smoke 2013.
Whenever I select ANYTHING (click on an item) there is a 2 second delay before it actually selects and hi lights the item. Its a really annoying delay.
Ive never had this issue before. Happens with just about any command I have Smoke do. Moving the timeline and zooming have the same issue.
This only happens with Smoke. Not with any other program I use. This happens when all the time. Even when Smoke is the only program I have open.
Currently TRYING to LEARN (key words): SMOKE for MAC Currently using: Final Cut Pro 7, Photoshop/After effects on CS6 Current system: MacPro5,1 12-Core Intel Xeon 2.66 GHz RAM: 12 GB ATI Radeon HD 5870 1024 MB OSX 10.8.3
I am creating a gif animation with GIMP 2.8.6 in Windows 7 64 bits.
I open the png files with the option "Open as layers" and then I edit the name of each layer setting the delay and the mode, for example "layer1(1000 ms)(replace)", "layer2(5000 ms)(replace)", ...
If I go to "Filters->Animation->Reproduce" the animation is OK. But if I export the file to a .gif file, the delay between layers is the specified in the Export options and not the delay which I set in the name of the layers.
How can I export a .gif file with the delay specified in the name of layers?
To gimp-user list recipients, I've run into a problem where I cant edit the delay between frames for my .GIF file. Im looking to set it it 41ms for each frame, which Ive done when prompted as I save my file, but the playback speed seems to stay at 100ms delay when I open the finished .GIF. Is it possible Gimp has trouble applying the delay to a high amount of frames? Im used alot of layers, 280 to be exact. The images/layers are from a video I previously converted to PNGs.
why pasting details between drawings and blocks, the software or hardware, hangs for what seems to be an age, but is probably more like 10-15 seconds but over a day this is costly.
Almost every time I switch in and out of Lightroom 5.2 running on OS X mavericks cursor and keyboard control freezes up for around 10-30 seconds. Other applications including LR still continue to work during this freeze up but the mouse cursor will not move and I just have to sit and wait for a little while and everything will resume normally after this delay.
In LR5 when I go to use one of the 5 zone adjustment areas in the Develop module histogram, there is a 2 - 2.5 second delay before I can use them for each image. The individual sliders below, e.g., exposure, contrast, etc, don't exhibit the delay.
This is not the case with LR4.4... and it is a cause of frustration for me due to the slowdown in my wedding workflow. I'm on a Mac Quad Core, 12 GB, SSD, etc, so I'm not sure what the problem is, as I said there's no problem with 4.4. I searched but did not see this problem listed. Also, LR 5.2RC does not fix the problem.
