Lightroom :: 5 Histogram Slider Activation Delay?
Aug 7, 2013
In LR5 when I go to use one of the 5 zone adjustment areas in the Develop module histogram, there is a 2 - 2.5 second delay before I can use them for each image. The individual sliders below, e.g., exposure, contrast, etc, don't exhibit the delay.
This is not the case with LR4.4... and it is a cause of frustration for me due to the slowdown in my wedding workflow. I'm on a Mac Quad Core, 12 GB, SSD, etc, so I'm not sure what the problem is, as I said there's no problem with 4.4. I searched but did not see this problem listed. Also, LR 5.2RC does not fix the problem.
View 1 Replies
ADVERTISEMENT
Jul 27, 2013
Does this slider work like the radius slider in high-pass filter in PS?
View 9 Replies
View Related
Jan 29, 2014
I created a catalog with smart previews from my PC (Win 7, 64 bit) and copied it onto my macbook pro (OSX 10.9.1) via a thumb drive. I can view the photos fine, zoom in and use the develop controls. However I get no histogram, cannot export and below the histogram it just says 'photo is missing'.
The whole point of this exercise was to choose and export lo-res selects to customers when out of the office. I can't do that.
View 6 Replies
View Related
Apr 6, 2013
When I choose "Enable Profile Correction" in Lens Corrections panel in develop module, the histogram changes as well as the image itself (gets brighter).
I do see the image change as it applies distortion correctly as well. I go back and hit reset and try again and always happens. I have only noticed this with my Nikon D600 with the kit lens. It did not see this with my D90 - no histogram changes,
This occurs in LR 4.3 and just upgraded to LR 4.4 to see if it was fixed.
The histogram looks normal.
The histogram after selecting the lens correction. The histogram changes plus the RGB looks too symmetrical as well.
Interestingly, I changed it the Make to Canon and it went back to the original settings. I checked other cameras and some behaved like the Nikon. I also went through various len models and some show this histogram fix with some lenses and looks normal with others.
View 4 Replies
View Related
Jan 1, 2014
The histogram clipping triangles disappeared in the Develop module. Upgrading from LR 5.2 to 5.3 did not solve the problem, and I can't find an on/off toggle in any of the support sites.
View 1 Replies
View Related
Nov 13, 2013
definitive function and use of the X/Y split colour numbers in the LR soft proofing histogram?
It's the only function inside of Lightroom that I can't figure out - is it a point sample between original and proof, or an area sample?
And whatever it is, what are you supposed to do with the info; you can't "lock" a sample point a la Photoshop can you.
There must be some prescribed method of usage for the info, otherwise why is it there?
View 7 Replies
View Related
May 5, 2012
I shoot in raw, I import into lightroom by doing a sync folder. Then I edit my picture using photoshop cs6. I save it as a jpeg. Finally I export this image as a jpeg to a sub folder called Publish, which means its ready for the web. problem is when i look at image in lightroom on the right side the histogram has no details, it wont show iso, fstop or anything. if I look at my original RAW file i can see the exif info in the histogram but on my final exported image its all gone.
furthmore it looses all its tags and meta data, I have to copy the metadata back to this file. it would be nice if lightroom would reinsert the meta info and exif once its reimported into lightroom.
View 8 Replies
View Related
May 5, 2013
Frequently when I import raw Nikon files to lightroom 4 I initially see a picture with tone and white balance I really like. during this time (2 to 10 seconds) the histogram indicates that it is calculating. When the histogram is finished calculating the picture changes with bad tone (exposure, contrast ...). You can go and manually change the tone settings but it can take sometime and I would rather be able to quickly return to the picture settings that was initially presented. Is there a short cut or easier way?
View 2 Replies
View Related
Jul 30, 2013
I would like to learn the reason why adjustments made on detail panel don't affect histogram.
View 7 Replies
View Related
Jan 3, 2013
while importing photos in Lightroom 4 they all are covered with a green layer even on the histogram. Could that have something to do with my configurations? Working with windows 7 prof.
View 1 Replies
View Related
Dec 15, 2012
I notice a rather strange behaviour in Lightroom 4.3 in the Develop module: it appears that the Develop preview ("zoom to fit" setting, I guess that's what 99% of people are using when using the global adjustments) is only updated when moving the mouse pointer AWAY from the slider that controls the adjustment (it doesn't matter if it's Clarity, or Highlights, Shadows, whatever).
I happen to often click somewhere on the sliders range, say somewhere in the middle between 0 and +100, to get an idea what a Clarity ~50 might look like. If I keep the mouse pointer hovering over the knob, the Develop preview will look pixelized/blocky, and not update to a more refined preview.
Only if I move the mouse pointer AWAY, the preview will be updated. It's as if the rendering is delayed until you're really sure you want that setting, perhaps to improve responsiveness/performance? This didn't happen in LR 4.2.
I tried this with a NEW catalog and only imported something like 100 photos to it, and no plugins - the behavior stays the same. I uninstalled the latest AMD/Catalyst graphics driver and let Windows 7 (64bit) "fall back" to a default driver - again, behavior stays the same.
View 27 Replies
View Related
Oct 24, 2013
Almost every time I switch in and out of Lightroom 5.2 running on OS X mavericks cursor and keyboard control freezes up for around 10-30 seconds. Other applications including LR still continue to work during this freeze up but the mouse cursor will not move and I just have to sit and wait for a little while and everything will resume normally after this delay.
View 9 Replies
View Related
Aug 22, 2012
Somehow I managed to "disappear" the thumbnail slider for resizing that's usually shown in the bar just above the Filmstrip. Missing in Library, Develop and Slideshow modules. I don't see a pull-down where I can reselect it. Had difficulty searching for info in PDF. Using Lightroom 4.1, Windows 7.
View 2 Replies
View Related
Aug 14, 2013
I have Razer nostromo keypad for lightroom and photoshop. I bought it because of Paddy for lightroom but it's TOO massy and hard to mapping the shortcut. Moving those sliders without the mouse is impossible without the paddy right now... Is there any other program to control those sliders by keypad?
View 1 Replies
View Related
Apr 26, 2012
Why does the clarity slider seem different to me in LR4 (4.1 RC actually)? IN LR3 I loved that thing. I would ramp it up quite a bit with many photos. It would give it a nice crisp look. Now it seems as if it just makes my shots look like they have too much contrast. Also, when using the clarity brush, many times it seems as if where I paint it on it actually lightens it up. I havce had to look as see if I had the exposure tool on instead.
Also, I swear a "medium contrast" tone curve setting is different now as well. This was the default setting in LR3. Now default is linear. But if I apply a medium curve from the drop down, it looks over cooked? What the heck? Are these things just me? BTW I am working RAW files.
View 16 Replies
View Related
Mar 11, 2012
I have LR3 and am unable to use the Quality slider when exporting. It is not highlighted and is fixed at a number that is lower than I want.
View 1 Replies
View Related
Jan 25, 2014
I just got LR5 & its upgrade to LR5.3. I cannot find the Smoothness Slider as advertised.
View 4 Replies
View Related
Feb 2, 2014
With the attached raw file, and the below settings already in place, why is it that when I move the Highlights slider to the right, the image darkens, and to the left, it lightens? Something rather odd is happening in the lower half of the histogram. The original file has very low contrast. I haven't seen this behavior with other files.I'm Using LR 5.3 in Windows.
View 2 Replies
View Related
Dec 15, 2013
Why does my white balance temperature slider have 1-100 values instead of a sliding Kelvin value?
View 2 Replies
View Related
Nov 28, 2013
Let's say that I have three stops difference between the luminance of my computer screen and the paper white under the lamp in my room. Which setting should I use for the brightness slider on the print module?
View 2 Replies
View Related
Oct 29, 2012
In Lightroom 3 when you moved through images these modify keys (+ and -) would always remain at the temperature slider. It seems to now always default to exposure. Is there anyway you can change this?
View 1 Replies
View Related
Feb 6, 2013
I cant make the music duration slider in the slideshow go to 3.7. I can only get it to go between 3.6 & 3.8 Can this be done. Fit to Music does not work for slideshow. Music ends before pictures
View 1 Replies
View Related
Jun 14, 2013
I cannot find it when I activate the spot removal tool in the develop module.
View 1 Replies
View Related
May 5, 2012
When editing some images in LR4 the sliders in Basic are:
Exposure
Recovery
Fill Light
Blacks
Brightness
Contrast
With other images the sliders are:
Exposure
Contrast
Highlights
Shadows
Whites
Blacks
how to I set the app to use the second set of sliders?
View 2 Replies
View Related
Mar 8, 2012
In the local adjustment brush, the noise slider default position is 0.Does it reduce more noise if the slider is in positive position or negative position .
View 4 Replies
View Related
Sep 16, 2012
In a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Using LR 4.1, Windows 7
View 1 Replies
View Related
Feb 25, 2014
I updated my Mac OS to Mavericks. Now in Lightroom 5 I've noticed that in the Basic module the "temp" and "tint" slider buttons no longer appear in color, but rather in the same grayscale as the rest of the slider buttons. They still function normally but having the color appear on the slider worked for me in my workflow. how (or even if) it's possible to get the color back?
View 2 Replies
View Related
Apr 11, 2012
I'm working on a time lapse sequence and when I apply the new clarity slider in LR4 to the batch of images the effect seems to apply itself very specifically to each frame introducing random variations in tone and exposure that cause unwanted "flicker" in the sequence. I'm adjusting one image and then syncing it's adjustments to the batch. Is there another way to do this that will apply a fixed value without reinterpreting each and every photo?
View 6 Replies
View Related
Mar 16, 2012
In upgrading to LR4 I wish to keep my process 2010 photos as process 2010. There is no need to redo them because the update pretty much forces you to start again with most processed photos.
My problem is that I now find that LR4 greys out the detail and color sliders for Luminance and color noise reductionas if they are process 2003 photos. That is, I do not have access to the detail and color for the noise reduction section.
I can only assume this is a bug or that Adobe have changed the Noise reduction engine.
View 1 Replies
View Related
Apr 25, 2012
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
View 2 Replies
View Related
Nov 28, 2013
Does exposure slider exactly simulate the photographic exposure?
View 3 Replies
View Related