I have a donut shaped image, including the "donut hole" inner circle. The donut contains swirls made up of different colors. The problem is, when I apply the cut contour line to the image, it wants to cut the lines inside the donut, along with the outer and inner circle.
When I apply boundary, it does not include the cut line on the inner circle. I want to print/cut, and want the circle gone.
I am trying to make a circular sign with text inside it that follows the contour of the circle. Half of the text will be on the top and half on the bottom.
View 6 Replies View Relatedhow to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedI am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedI am trying to create contour cut lines on rasterized images using Illustrator CS4. I have been changing the PNG files to TIFF files and saving with preserve transparency and then placing them in Illustrator. From there I live trace a copy to make a vector outline of the image, but I am uncertain what to do to make it so that I can upload my file into FlexiSign, make contour lines from that file, print, and cut. Everytime I save the file into AI format and bring it into FlexiSign it just contour cuts a rectangle around the image instead of making an actual outline of the picture.
View 1 Replies View RelatedI have an image i'm trying to make a contour with. I want the inside object to contour out to the outside object. Every time i try to create the contour it says offset too large. I've tried i set the offset to 0 but it still doesn't work. I want the dark green to fade out to light green.
View 7 Replies View RelatedIs there a way to make an outline that is either only on the inside or the outside of the center line of the outline? I know that the default in Corel is to center the outline on the center line of the outline.
View 2 Replies View RelatedIve got a image(Fill K-100) in a vector format that i'm wanting to have a faded contour inside from White(C-0 M-0 Y-0 K-0) to Red(M-100)
I can get it to have a single color fade but not from white center to red "glow" around the white.
I have an image inside PowerClip. Every time I move the image a bit and stop editing the contents I notice that the earlier PowerClip area has left marks in the image. Actually it has cut a 1 pix line permanently on it.
I'm not sure if this happens only when editing PowerClips originally made with X5-version.
A bit annoying problem anyway. It basically destroyed all the images I used in a project...
Every time I put a box around an image, i am not able to select the image inside the box. Instead it selects the box.
View 2 Replies View RelatedI am working with vector art that has lines that either look like they were cut off and not finished out or extend to the edge of the page so they are straight when they should actually be curved.
Is there any way to take a straight line or part of an image and curve it with ease or will I have to redraw or alter each line?
Originally, I'd used linear transparency on image#1 which caused a line that showed up only on a Ricoh-generated hard proof. I kept the transparency of image#1 and converted it to a bitmap, so no lens, but still the line. Finally I ditched the transparency I'd applied to image#1 and placed image#2 over image#1 to achieve the fade-out of image#1 that I had originally intended. Now image#2 is creating a line only evident when printed on that bloody Ricoh!
View 4 Replies View RelatedI have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
When I label my Contour lines there is a blue line(perp) running right thru the middle of it.
I have looked to take it off but can not find it.
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies View RelatedIt happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.
Possible ideas:
-Contour Labels set to "Mask Contour Line Only"
-Dynamic Inputs on
-Selection Preview is on (but it's disabled for "When a command is active")
-Surface is shortcutted into the drawing
-Contours are from an XREF
Civil 3D 2013
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1
Why does my vector line look like a bitmap when I shrink the image down. Instead of a sharp black line (vector), I get a broken, gradient gray black line (looks like a bitmap)?
View 1 Replies View Relatedi want to make a image which made of only dots no line only dots. how i make that kind of image..
View 5 Replies View RelatedThe contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies View RelatedHow does a 97 contour pass through a closed feature line with elevations between 97.3 and 97.8?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
by default revit shows roof plan in the Site plan view.
Is it possible to show site plan that one line would represent building contour? Also is it possible to cast shadows of all the building if the first floor is selected?
i was trying to make site plan from the fist floor, but since i gave intense topography ground is being cut and i need full topography. i am using 2013 revit.
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedHow to maybe trace the contour of one object (font) to close the lines of another object to allow it to process in Cut Studio for a Roland GX-24? Basically there's a volleyball and on a corner of the ball the font will overlap but because there are so many intersecting lines, having the cutter make the cuts would be impossible.
I did "contour" the font but the lines inside the volleyball image are not "closed" and I want it to follow the text shape to ensure uniformity instead of me trying to close every node manually.
If i draw e.g. the letter "R" i immediatly know height and width of this object. But what i want to know now is the exact length of the contour. How do i do that in X4?
View 2 Replies View RelatedI want to do a simple thing : drop ortho-photo on surface generated from contour line.
First thing, I need the basic terrain. I did import my contour line in a new draw, using the import map feature. I then saved the draw under the name " topo ". At this point, the contour line are 2D break line with no elevation.
I then opened a new draw to which I did associate my draw " topo ". Then I used a query to modify the elevation of the line using the attribute " contour " in my table, thus resulting in my breakline to become 3-D. It works fine. Then I save the new draw as " 3D_Topo ". I then get a warning :
" The association between objects interogated in the current drawing and associated will be deleted once the current document of the draw is closed " (I made the translation from french to english, in french it stated like this : " L'association entre des objets interrogés dans des dessins courants et associés sera supprimée une fois le fichier de dessin courant fermé. " ).
Well question #1 : What does this warning mean / imply ?
Then, I have those .ecw files as ortho photo which I want to import. So I use the function " connect " with raster image, then I select my file, then I " add to draw ".... then something very strange happens.
Sometime, the image appears correctly...and some other times I get nothing and I get this " disconnected " message in the task pane ..and no matter how many time I actually connect again the .ecw files, it will not happen in the draw ! Then I simply close the draw, start map 3D again, then I do the exact same thing, and sometime it works, sometime it doesn't.
Question #2 : any clue on why the .ecw files sometime works, sometime doesn't?
Now, let's assume I finally made it to connect correctly and that Map3d didn't crash whilst I was doing it (because I don't know for you, but here, it does happens quit often), I now have (as shows in the picture I attached) two thing. A surface made (well, I went back in the civil 3-D module to make the actual surface from the breakline definition) with the contour line and a imported image. I now want to drap the image on my surface! So I use the option " drap " which is in the surfaces option (in the ribbon surface tools)... well it looks nice since it propose me to use the surface I made up with the contour line as the base and the imported .ecw files as the file to be draped upon. So I simply do that and.... well...nothing happens! My image isn't draped at all, it stays there,
Question #3 : How should I proceed to actually drap my image over my surface ?
Question #4 : Considering I made it to drap the surface, how can I save this new draw independently of the attached other draw or database?
We are very, very new to the cutting of a corel design with my roland. I have letters that consist of a block letter with an 8 pt black outline as the back layer with a block letter and a 4 pt white outline as the top layer, making the shadow effect.
I convert curves and add my contour cut line, but it keeps appearing INSIDE the black outline and cuts the black out. The image cuts out fine and the one color part of the letter does, but the black and white outline shadows are cut out.
I've tried boundary and contouring every way I can figure. Obviously there is a setting/trick I don't know.
I am making vinyl decals and for some reason I am so confused about "contour and cut" which is which ? I need to know how to put a line around an object that will be a cut line .
View 3 Replies View RelatedI cant figure out how to contour my images so it only cuts my outline when I send it to my graphtec cutter, I have a Graphtec CE5000-60 cutter plotter, Corel Draw Graphics Suite X5, and Windows 7.
View 6 Replies View Related