CorelDRAW Graphics Suite X3 :: Missing Objects In Middle Of Step And Repeat?
May 5, 2011
After laying up a nameplate design and having inspection verify the design I went to the next stage of of our production which is step and repeat.
I stepped the nameplate 5 down and items 3 and 4 are missing 1 line of text but the text re-appears on the last (5th) image. I then I stepped it accross 6 times with items 3 and 4 still missing text all the way accros (I would expect this). The missing text went un-noticed by both me and inspection since the first (upper left) and last (lower right) images should be identically correct and they were.
Having issues with exporting files to an .eps format - using "selected only" some of the objects that I have selected do not get exported - ie. they are missing from the .eps file altogether.
On top of that, most of my colours get washed out to a grey scale - I do work in spot colours.
I prints photos with some text overlaid, like title of image, copyright etc.
I select all objects and save the design then print, and sometimes only the text prints! the image/photo does not print.
well that is kind of annoying to have a 12x36 panorama canvas with only the text and not the picture, since the canvas is ruined and costs about $12 a print.
I have drawings created in X5 taht i need to put into word documents, i have in the past done this many times with no issues, i now have a drawing that will paste in, but some objects are missing, and some text is missing.
I have tried all of the Paste special options, the only one that will put all objects in is bitmap, with all others objects are missing.
If i print as PDF all objects are there, if i Export the graphic for Office, using compatibility mode places all objects, but if i choose editable mode the same objects disappear
I was wondering why Batang and Arial were appearing in the Fonts under Document Properties when I had not actively used them in my "New" document.
When I looked at the Default text files, I believe I see the reason. I find Batang listed as the default Asian Text font for both Artistic and Paragragh Text. The options for Asian Text don't seem to include any fonts that I have on the old machines.
Similarly, the Middle East Default Text style would seem to generate the Arial(Arabic) entry in the required fonts.
Is there a way to completely eliminate the default Asian Text and Middle East entries from the default text styles?
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
I have just installed CorelDRAW x4 and when I first used the 'Duplicate' tool, a pop up box appeared. The second time I used it, the pop up box did not appear and I cannot find how to open it again.
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
I paid a lot of money for this software which was supposed to come with a library of clipart, photos, etc. I have exactly ZERO and I cannot get any support on why that is.
I'm running CD X5 on a windows 7 machine. I had a custom "my Toolbar" set up wit all my most used tools and now suddenly it's gone! It is turned on in the menu (checked). I have unchecked it and rechecked it to no avail. I have re-booted my machine and still nothing. why it's gone but I can't seem to get it back.
When you open the welcome screen and you choose "New from Template" the welcome screen in the background is missing the left side of the welcome screen.
And when you close the "new from template" window, it stays missing and you cannot choose any of your recent "open documents".
My computer with CORELDRAWX5 got damaged, and I purchased a new one and upgraded to X6.
My problem is that when opening my previous files on my new computer, I have alot of MISSING FONTS, that I use regularly and do not currently have. How do I retrieve these fonts?
I just upgraded to X5 (from X3). Many of the fonts that I have in my used are missing. I went through the Bit Stream Font Navigator and cannot located them there either. Many of my existing customer files require those fonts for use in their logos...etc. I also went to myfonts as indicated and did not see them there.
I am fairly new to CorelDRAW and I am having an issue with layering objects that I can't figure out. The problem I am having is this:
I have two line drawings, and one sits on top of the other. Normally, the object in the back is partially hidden by the one in the front. However, I have just done a drawing where the object in the back is NOT partially hidden by the one in the front, and it looks like they are both on the same layer. What happened? I am not sure if I inadvertantly changed a setting, but I can't seem to figure out how to hide that back layer. I have tried using the 'order' function, and that usually works, but for some reason it is not working this time.
Is it possible to convert/open a CDR file to a CPT or PSD file such that the objects are editable. Specifically I need the text to be editable in the resulting CPT or PSD file. I'm using X3.
Just upgraded from X3 to X6. Still getting used to it, but so far so good.
On one layout, some items on a printable layer do not appear on the Print Preview. The page contains a monochrome bitmap, some text and a curve. Only the bitmap appears on the print preview, yet everything prints.
It doesn't happen with every job. Not a big deal on this job, but there will soon come a time when I need to know what will and will not print.
I have Corel DRAW Home & Student Suite X5. It appears not to include the Docker "Object Coordinates" although both the video and Help files include prescriptions for using it.Corel Support insist that this docker is present in this edition of X5 and instruct me to reset the application defaults (F8).F8 does not reveal the missing docker, nor does a complete uninstall/reinstall. It seems to me that "Object Coordinates actually is NOT there.
I am using MS Windows System 7 and printing onto two networked printers, a Lexmark Pro205 and a HPD7460, It seems that when I have finished setting up a page of texts and inserts for a publication the page looks good on the screen and on the PRINT PREVIEW window of either PRINTER software but some of it does not print. The left side of the two column page prints OK but the right side is blank after the first line. The text that flows from page to page to page seems to be alright and the inserts that are not part of the flow text that has been inserted as wrap around text (surround) prints.The is simple missing. The next page of the same article is doing the same thing.
I originally had this problem in another document on the HP but not the Lexmark. Now I have it on both printers in this document.
I was wondering if there are control characters that the printers are acting upon during the print function. Can one see all the control functions on a page before printing or at will?
how to make a simple tshirt design and want to work along with video but I have everything except the advanced tools option at the top tool bar I have just loaded X6 am I missing this or is this something that doesn't come with?
I've been trying to edit a certain Corel Draw document. At first it told me I was missing a font. So I closed the Corel Draw and installed the missing font.
But now its not showing the new font in the document. I see the new font in the control panel. And i can type a new text box. But I have 60 pages or so and I dont want to retype all these text boxes.
So picture that you have designed something in Corel. Let's say an invitation. I go to put text or a graphic on top, and nothing is going on top. My text is behind. Nothing i do works. (ex. ctrl-pgup, object in front of.... etc.)
