AutoCad :: Where To Find Architectural / Mechanical Blueprints
Jan 7, 2009where to find some useful links of Blueprint of a Plan, either Architectural or Mechanical. I want to practice myself using any types of commands in AutoCAD.
View 3 Replies
ADVERTISEMENT
CorelDRAW X5 :: Best Way To Use Blueprints?
Feb 11, 2012best way of setting them up to uses in Corel X5; these are what i wish to use in constructing my card models that i intend to make of Buses and othe vehicles in 1/76 and 1/100 scale.
View 1 Replies View Related3ds Max Modeling :: Blueprints Not Lining Up Correctly
May 24, 2011I downloaded the blueprints for a Cobra Helicopter, and the side and front blueprints are not lining up correctly at all. I am not sure if this may be an issue with the actual blueprints themselves, or something I may be doing incorrectly. Below illustrates the problem, the green and red lines show areas where the front and side blueprints do not line up at all. Here are the blueprints I am using, I cropped both the front and side blueprints from the top and bottom most point. [URL]
View 4 Replies View Related3ds Max :: Creating Car Via Blueprints - Tube Outlines
Oct 2, 2012I watched a youtube video on how to create a car via blueprints the guy on youtube used the tube tool started from the middle of the wheel outwards to create the arch
My problem is when i scale out from the middle of the wheel the outline is happening at the back of the blueprint
How to have this at the front e.g where im scaling out from ...?
Illustrator :: Convert Pictures To Blueprints
Feb 20, 2014I'm a hobbyist model builder, and I'm starting my first, homemade model. It's going to be a miniature of Wimbeldon's famed centre court. While, the object is not to make an exact miniature version of the real thing, I would like to make it as accurate as possible.
That said, I need to create a sketch (see examples @ [URL) based on real pictures of the stadium. Is there a way to do this using Illustrator? I've tried the various trace options, but nothing even comes close to accomplishing this. I hampered by my inability to draw freehand and my lack of experience with CAD programs.
AutoCAD LT :: Add Room ID On Architectural Drawings?
Jul 18, 2013How do you add room ID's on architectural drawings?
View 9 Replies View RelatedAutoCAD Architecture :: Add On To Use Architectural Functionality
Jan 14, 2013If I am currently using a standard version of Autocad 2011, can I buy an ? Or do I need to buy a whole new version?
View 1 Replies View RelatedAutoCAD LT :: Architectural Blocks And Symbols
Jul 25, 2012I've just started working for an architect and downloaded AutoCad LT 2013 today...is there some sort of menu where I can get basic door, window, etc. blocks? Or are these things I need to create myself?...I see the "tool palettes" box but it seems to have a random selection of stuff labeled "Imperial Samples" leading me to believe there might be other stuff elsewhere.
View 3 Replies View RelatedAutoCad :: Drawing In Architectural Units
Jul 1, 2011I am having problem getting my drawings to get small. Example 1" = 25' how is that translated into an architectural units. And the drawing to be small enough to fit in the screen. Actually I have problems with any architectural units to fit in my screen.
View 3 Replies View RelatedAutoCad :: Get FEA Box To Appear In Ribbon In Mechanical Desktop?
Jul 7, 2013how to get the FEA box to appear in the ribbon in Mechanical Destop?
View 7 Replies View RelatedAutoCad :: Dimensioning In Architectural Units
Feb 9, 2012Im having an issue with my dimensions when set on the architectural units settings. The dimensions are coming up as inches even though I have the setting set to feet. When I change over to decimal feet the dimensions show as feet.
View 4 Replies View RelatedAutoCAD 2010 :: How To Make Architectural Dimension
Jan 9, 2014I am working in inches so I set my dimension units to Architectural. When I am dimensioning a distance that is twelve inches I would like the dimension to read 12" not 1'. I would like to set up the dimension style to report this dimension automatically without editing the text manually to change 1' to 12". Is there a way to set this up through the dimension style?
View 9 Replies View RelatedAutoCAD 2010 :: Transform Architectural Drawings Done In 2D To 3D
Jul 4, 2012I'm having problems to transform an architectural drawings done in 2D to 3D, and also when it comes to confirm and locate their respective courts.
View 1 Replies View RelatedAutoCad :: Mechanical 2014 Palette Crashes
Jan 8, 2014I just upgraded to ACAD Mech 2014 from 2011. When I import my palettes and try to use them, the program crashes every time (fatal error and send report to Autodesk).Think I'll have to rebuild the palettes in 2014 for them to work?
View 1 Replies View RelatedAutoCAD 2010 :: Callout Tools Available In Mechanical
Jul 2, 2012I have users using AutoCAD 2010 - both Architecture and Mechanical. My questions; are the Callout tools that are available in Architecture also available for Mechanical? I am looking to see if we can find the same toolbar(s)?
View 3 Replies View RelatedAutoCAD 2013 :: How To Install Mechanical Without Autodesk 360
Dec 6, 2013Working on Autocad 2013 Mechanical. I ALWAYS have the Autodesk 360 SignIn objects on the top bar. I have disabled the Autodesk 360 from the installation list in the network deployment. But this doesn't work. I have also modified the registry and the .ini files but it seems NOTHING works! How can I install AutoCAD in silent mode without getting these objects on the top bar?
View 4 Replies View RelatedAutoCad 2D :: Architectural Ticks Display Very Large?
Oct 16, 2012I received a drawing from a client where the architectural ticks display very large. The leader arrow shows as the correct size but the dimension tick does not. I went into the dimension style manager (dimstyle) and everything seems to be in order. The tick size is set up to be 1/16". I tried to dredge up out of my memory the autocad variables that mess with the size of the archtectural ticks like "dimasz" and "dimblk", but with no luck.
Currently using Autocad 2013.
AutoCAD .NET :: Determine If Mechanical Interfaces Are Loaded
Dec 13, 2012As a part of an other recent topic (Interop 32/64 COM - Acad Mechanical),In VB.NET, how can I easily be sure to be in a Mechanical AutoCAD with every specific interfaces loaded (SymBBAuto, AcadmAuto...)?
I tried to get specific system variable like "AMVER" but this does not work.
I tried a "Try... Catch" while using "GetInterfaceObject", but this does not work at any time... sometimes I got fatal errors.I don't want to use the caption of the AutoCAD window, it is not enough reliable for me.
AutoCAD Civil 3D :: Drawing Units Stuck On Architectural
Feb 22, 2012I have an old dwg that I used to add new data to. I also inserted a block produced by Revit to get a building elevation. I am not sure when or how it happend, but my drawing scale units are stuck on arch. I am talking about the bottom right hand corner of the screen on the status bar where there is the spot to set drawing scale. When I open by clikcing the arrow all the scales are in architectural units. I can add a custom scale of 1"=100', but it does not otherwise appear in the list. I wasn't going to wrry about it, but when I layout a plan/pro series they do not seem to be scaling correctly (and I cannot find a place to specify what scale I want the views to be at). UNITS, -DWGUNITS & -AECDWGUNITS don't fix it, they are all set to decimal, etc. Using the seetings tab to change the drawing settings, everything is set to feet, there is no place to specify arch units, the 100 scale drawing is shown as a custom scale.
This is C3D release 2012, on a 64bit Win7 Pro machine, everything is up to date.
Where I can change the units for the drawing scale?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
AutoCAD Inventor :: Translation Of DWG - Mechanical Desktop Must Be Installed
May 1, 2013I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedAutoCad :: How To Add Dimensions To Architectural Drawing In Model Space
Feb 22, 2007I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
AutoCAD Inventor :: How To Translate Model From Mechanical Desktop
Aug 25, 2013How to Translate the model from Mechanical Desktopt in Inventor 2014.
Program requires installed mechanical desktop.
How to tranalate without having mechanical desktop?
AutoCAD 2010 :: 2012 Mechanical Streaking Images
Dec 5, 2013I have a user that is getting what appears to be streaks on his drawings.
The video card has the latest driver.
I ask how often this happens and he states:
Almost every time I have a large 3d drawing ..or multi 3d drawings open (which is often the case)
AutoCad :: Saving From 2012 Mechanical To 2006 Lite?
Feb 27, 2012It is possible to save from AutoCAD 2012 Mechanical back to REGULAR AutoCAD 2006 Lite? I am updating files on my computer with 2012 Mechanical but have to email them back to the original computer (which only has AutoCAD Lite) to print them out. I wouldn't think it would matter if the save format is AutoCAD Mechanical 2006 as long as it is still a .dwg file, correct?
View 5 Replies View RelatedAutoCad :: Unlock Xref To Modify Mechanical Drawing
Oct 27, 2013I am having trouble with a locked xref. I would like to unlock it so that I can modify for my mechanical drawing. The architectural drawing is provided in xref form from the architect and he has not left it open.
Is there a simple way I can unlock it so that I can modify it without going back to the arch?
I am currently using 2008.
AutoCad 2D :: Architectural Drawing - View Port Scale
Mar 21, 2012I am working on an architectural drawing and for some reason when I try to "objectscale" the annotation to the same scale as the view port I am using, it doesn't appear or if it does it is a lot smaller scale than I requested.
View 4 Replies View RelatedAutoCAD Inventor :: Export From Autodesk 8 To Mechanical Desktop 2004?
Jan 23, 2013I have a drawing that was sent to me using Autodesk inventor 8 but I want to add it to a drawing I have already started in Mechanical Desktop 2004 is there any way to export the drawing into a format that can be opened by Mechanical Desktop 2004?
View 1 Replies View RelatedAutoCAD Inventor :: 2013 - Leading Zeros In Architectural Units
Jun 10, 2012I can get the leading zeros in the architectural dim style. My problem is I cant seem to get the leading zero in the parts list format. If I edit the parts list, then format column, there is no option to include leading zeros like in the dim styles.
We could format the parts list with the leading zero before....This is in 2013, BTW..
AutoCAD Inventor :: Converting Step Files For Mechanical Desktop?
Feb 7, 2012I have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
AutoCAD Print / Plot :: Autodesk Mechanical Not Printing On HP Designjet 500 24
Oct 12, 2012I have a problem with print from Autodesk Mechanical on a HP Designjet 500 24.
The system is a Windows 7 Professional 64bit.
When I select the printer, the printer returns to "none".
I have tried several drivers, the HP Designjet 500 plus 24 or HP DesignJet 500 24+HPGL2 card.
I can select the HP DesignJet 500 24+HPGL2 card, but since that driver is incorrect for my printer, it doesn't print.
I have found this same problem for a HP Designjet T610.
Here is says to use a driver version from 10 feb 2010 or later. But there isn't any driver around or after this date for the HP Designjet 500.
Other program's can print just fine through the original HP Designjet 500 24 driver.
AutoCAD Inventor :: ILogic - Convert Inch To Architectural Style?
Sep 27, 2011I have a parameter length that is currently in inches and I would like to use it to populate the description but I would like it to be displayed in Architectural style (i.e. 12’-3”). I would also like to have it round up to the nearest 3”.
View 4 Replies View Related