I have annoying problem that happens ones in a while. when starching lines i use to select the blue point, type a number and have the line extend or trim respectively.
For example , line which is 40 and i want it to be 60 ill click the blue dot, move the mouse in the direction i want and type 20.
Right now if i do the same the length of the line become 20.
I'm sure this has been asked many times but none of the queries I used brought up a similar question. My issue is that I recently spent a lot of time annotating a detail view with leaders attached to geometry, leaders not attached to geometry, and sketches constrained to geometry projected from the view.
I made some modifications to the model which didn't re-locate any of the components that I'd annotated, but somehow the detail view got shifted, and all of my leaders are pointing to the wrong place and the parts of my sketch that weren't constrained to geometry are in the wrong place as well. Some of the leaders seem to have held to their posts better than others, but for the most part my annotations are worthless and will need to be re-done.
How to choose my starting point to be relative to another point without drawing help lines (which mean they must be drawn, selected, deleted = time).
For argument's sake, consider I am attempting to draw a cross. I use the line command, input a starting point; choose next point: @100<0 (to draw a line 100 units in length at an angle 0 [relative to X axis] relative to previous point).
Now I need a vertical line of equal length to cross the middle-point of the horizontal one.
I could snap to middle-point, draw a line of half-length at angle 90 and draw another of 2.(length) at angle -90. This produces 2 lines one of which is unwanted must therefore be selected and deleted.
This simple example illustrates my point.
I need a command which allows me to choose my first point (for the LINE command) as the point which is "X" units at angle "alpha" relative to a point "x,y" (or a coordinate selected by the SNAP tool if you will).
here is my jig rotate code
Protected Overrides Function Sampler(ByVal prompts As JigPrompts) As SamplerStatus Dim myPPR As PromptPointResult myPPR = prompts.AcquirePoint(myOpts) Dim curPos As Point3d curPos = myPPR.Value If curPos.IsEqualTo(BasePt) Then Return SamplerStatus.NoChange Else myMatrix = Geometry.Matrix3d.Displacement( _ BasePt.GetVectorTo(myPPR.Value)) Dim pt1 As New Point2d(BasePt.X, BasePt.Y) Dim pt2 As New Point2d(myPPR.Value.X, myPPR.Value.Y) BaseRo = pt1.GetVectorTo(pt2).Angle End If Return SamplerStatus.OK End If End Function Protected Overrides Function Update() As Boolean myBRef.Rotation = BaseRo Return False End Function
I always rotate the block with bottom left point as fixed point. What can I do to make the block rotate around another point? such as centre point of the block?
when I create a template, and start dimensioning, the font size are always set to the default (.2) is there a setting to choose to make the font size relative to the size of dwg so that I do not have to increase the size of the fonts each time I do a dimension or any text.?
View 3 Replies View RelatedI have a problem with absolute and relative coordinate regarding drawing an arc.
From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.
For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.
Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?
Having trouble recently with tracking,For example if i start the line tool, and track from a point, i am given absolute coordinates instead of relative coordinates from that initial point. Absolute coordinates are not much useful to me, I want to be able to start a line at a certain distance from another point.
View 1 Replies View RelatedThis seems like something that should be really easy but for the life of me I can't figure it out. I even started looking at using the Subassembly composer to create a custom SA but that seems like a ton of work so something that would seem to be a common problem.
I need to provide a v-ditch with 2:1 side slopes at the toe of a 2:1 fill slope. The flow line of the ditch should be 2 ft below the daylight point of the roadway pavement section.
My problem is that the conditional subassembly seems to evaluate the height of fill directly beneath the attachment point of the conditional SA (pavement section daylight point in my case – “Daylight_Sub” Point code). Instead I need it to evaluate the difference in elevation between the catch point of a 2:1 daylight fill slope and the conditional SA attachment point (Daylight_sub). If that difference is less than 2 feet, I need to provide the ditch, otherwise I can just use the daylight slope for the ditch foreslope and the existing surface for the backslope.
how to do this? Maybeits as easy as using a predefined daylight subassembly that I'm overlooking?
Here’s my current assembly attempt:
And the resulting behavior. It is solving the 2nd fill condition when I would like it to solve the 1st fill condition:
I need to increase the size of a fixed dialog box so I do not have to use the horizontal and vertical scroll bars to see the contents, I have included a picture.
View 3 Replies View RelatedUsually when you draft, you need to place objects relative to other points. Is this not possible in Revit? Temporary dimensions are useful, but sometimes it measures a distance I don't have the value of. If I can't select the relative distance for myself, I have to place the window or door and then adjust the distance afterwards.
View 6 Replies View RelatedI'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.
Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.
in Xara Designer Pro 7 is there maybe possibility to put one big image which as fixed is behind of the Page?
[URL]
Is there a way to create a fixed size selection rectangle that I can use whenever I want to take a selection from a larger image? Currently, I'm am doing this by trial and error and it's not fun.
View 2 Replies View RelatedThere seems to be an action called adobe_SaveForWeb, but I can't find any documentation for it.
I need to export an artwork to a JPEG with a fixed size (to create a thumbnail of an Ai file), and i've found several unanswered question on this topic. With Save For Web, I can do it through UI.
a documentation for adobe_SaveForWeb, or tell me how which parameter I need to initialize for it to work? I'm using CS6 SDK with Visual C++
Is it possible to crop to a fixed size (e.g. 400 x 250 pixels) in Elements the same way you can in Photoshop?
View 5 Replies View RelatedHow do I create a fixed size Selection, Shape or Path?
View 1 Replies View Relateddoes anyone know if it's possible to export a desired (fixed) file size with a batch automation in Photoshop? For example:
I have 50 images (*.jpg) that have different file sizes (25k, 15k, 45k etc) now I would like to export a fixed file size to 10k for all images...
I have tried this in Photoshop and in Fireworks, but the Programs exported 10K or less and sometimes even greater than 10k
I would really be happy if someone knows a way to do this or if there are any stand-alone programs that can automate and export targeted file sizes.
This is for Rectangle Select. I read somewhere else that it's possible but it didn't say how. I would also like to change the default for fixed ratio from 4:3 to something like 1:1 (square).
View 4 Replies View RelatedI have a surface, to which I've added data from a ENZ file. No problems - I had a workable surface. I want to be able to work on the drawing at home as well as work. So I brought home the DWG as well as the ENZ file thinking that if both were in the same directory, it would work OK. But I get an error saying the Point file can't be found. I can't see any way to make the file reference relative, rather than absolute.
View 5 Replies View RelatedI'm using Illustrator to crop and arrange a number of raster images. However, I'm starting to have file management problems, because the Illustrator files quickly balloon in size.
Example: I got public domain jpg image of a deer off the Wikimedia Commons. This jpg image is 0.35MB. I opened up a new Illustrator document, placed and embedded the image, and saved the document (with the 'pdf compatible box' unchecked). The resulting Illustrator file is 7.7MB in size, over 20 times the size of the embedded jpg image.
I've looked around these forum, but other than the 'pdf compatible box', I couldn't find any good solutions. Is there some other option or preference that I could tweak? I need to use embedded images rather than links, but the files are getting out of control (>100MB).
The screen capture at the end of this post shows the situation. In the top folder in the screencapture, the image file is highlighted, so you can see the filesize. In the lower folder in the screencapture, the Illustrator file is highlighted, so you can see it's filesize. Then you can see the open Illustrator document on the right. (edit: the forum software is no longer allowing me to add images, so I've put the screencapture on Google Drive here: [URL]
The .ai file with the embedded image is here: [URL]
I'm using Illustrator CS6 64-bit, v16.0.3 on Windows 8-64.
I'm automating a custom watermark action for a series of photos (1000's) the orignals vary in size so thats my first hurdle to accomodate, the final water mark will comprise of a white stroke offset say -5 mm(but again ideally relative to each images size) and then placing a PDF logo at 20% opacity and placed centrally.
The problem I have is that I want the logo to be at the same scale throughout the sets of images, ideally the stroke too.So my question is can this be achieved in PS, scaling relative to document because all I can seem to do is specify a size or percentage.
A work around I considered is basing the final image size on a set width or height and then using a standard size for the logo and stroke just thought I'd try the hard way first.
In CS4 when I zoomed in on an image, the bar at the bottom would show the size of the image now on screen relative to the full size. i.e. if I go from 50% to 100% the bar would be half the size indicating that I am only seeing half the image. At least I think that was the case in CS4.
Here's and example from CS6.
Open an image, choose "Command-0" to make it fill the window, and the percentage is 48.16%. The bar at the bottom is not there, but if it was I assume it would fill the width of the window.I select "Command-+" to zoom in, and the percentage goes to 50%. The bar now fills about 30% of the window width indicating that I have zoomed in a whole lot, but I haven't. There is only a little bit of image on either side not visible, the rest is a huge grey area extending left right, and up and down. How do I make the bar indicate the true amount of zoom, and how do I get rid of that grey area?
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Say I have an image that is 100x100 pixels. And I want to take one of the layers and resize it to 50% of the image size, so that it is 50 pixels. How can I accomplish that?
The reason I ask, is that have multiple images all with different size. But I have a signature (ie. watermark) that is always the same size. I want to be able to place this signature, and then resize it to XX% of the image it was placed on. That way, it should always have the same proportions.
when i make my brush size very small (to the point that its only like 4pixels dot on the screen), a crosshair symbol automatically appears around it which makes it hard to see the cursor's surroundings when working on small details without zooming in alot (which would make a 4px cursor appear bigger thus losing the crosshair again). I guess this feature is there for people that might have trouble locating small cursors, but on a large tablet that allows very fast work without having to zoom in much, this makes things harder. Is there a way to disable this or modify some files or "hack" the cursor icons somehow and delete it?
(Tried all possible combinations of the PS prefferences but none of it seemed to be related to the cursor becoming a crosshair once the brush size gets very small relative to screenresolution)
The fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies View RelatedI have created a new point style in a new drawing that I am not familiar with. When I am in model space the points are HUGE, when I am in paper space they are the 2mm that I want them to be.
I think there was a scale setup somewhere but I cannot seem to figure it out again.
what the file size limit is for importing point clouds into Inventor? Or is that a how long is a piece of string question that depends on computer ability?
View 2 Replies View RelatedHow do I make it bigger? When you render it to Photoshop you have to zoom in to see it.
View 4 Replies View RelatedIn X6, I select the Text tool, then in the docker or on the tool ribbon I set the point size to, say, 12 points.
But, with the Text tool still active, when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
Next time I select the Text tool, the point size shows as 12. But when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
How can I arrange for all artistic text I deposit to have a certain point size I choose.
Is there a way to increase the size of the anchor point and handle icons when using path/pen tool in PS 7.0?
View 4 Replies View Related