I drew a circle, then a polyline, then used sweep to make a sort of curved cylinder. It worked, but if you try to orbit at all, it gets extremely large (1000+ units 0_0) and turns into a straight cylinder. SD17B.dwg
View 2 RepliesI can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedMH.dwg
I'm trying to slice the grey cylinder object in the attached drawing with a curved network surface. Rather than slice around the path of the surface it seems to have just taken a planar slicing plane between the 2 vertical edges of the network surface.
I want to wrap label on the cylindrical shape object.
[URL]
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies View Relatedhow make a cylinder to show like without cross -line? See attachment for detail. I use AutoCAD 2012. I just need to show parallel line on the face of cylinder.
View 5 Replies View RelatedHow to make a Mitered Elbow from a cylinder this is driven by our Manufacture they would like to roll a sheet of metal and have a stitch cut within the rolled sheet so they can then just cut the additional amount of material between the stitches to get two identical mitered elbows from one piece of rolled sheet metal. Please see the attached doc. to see what I'm trying to do.
Inventor Professional 2011
Vault Professional 2011
Windows 7 64-bit
Intel(R) Xeon(R) W3530 @ 2.80GHz processor
NVIDIA Quadro FX 3800 graphics card, 15G RAM
I am trying to make a cut on a 12" D cylinder at a 45 degree angle and i am having a little trouble. I have projected the shape onto the curve and sketched it. Now to finish the cut do i need to scuplt that path or how do I go about doing this.
I provided a screen print to try and and explain it a little batter. The half moon looking sketch is what i am tring to cut out of the cylinder. i have already projected the surface lines on the cylinder, but get stuck at this point
How Can I Make Flat Pattern From A Part Of Cylinder ? (2013 Version)
Like Attached Image.
In inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedI'm modelling a pen, the problem is that its bottom is not flat, it is a section of a sphere, that goes inside the pen, I've tried soft selection, relax, but I can't make the shape, I could use booleans to cut the sphere out of the model, but I' avoiding booleans because they destroy the topology.
View 8 Replies View RelatedHow do you make curved elements appear curved in a 2d drawing?
View 9 Replies View Relatedwe have just upgraded our autocad from 2010lt to 2014lt at work. How to make curved lines appear the same as they were in the 2010?? when you select a line with a radius in it, it used to have little arrows showing the line is curved and what direction. is this possible to change .
View 5 Replies View RelatedHo can I make a curved line like on the image but in a shape of an egg? What I mean is, line going from thick to thin.
View 3 Replies View RelatedIm trying to re-create this logo and cant figure out how to make that swoosh line thing.
View 3 Replies View Relatedwhat tool would be the best to make curved lines on photoshop cs ?
rather than having to use illustraotor all the itm e for this action.
How to create a flow arrow label for a feature line that parallels the curve?
I've a vague notion that this could be done with a dynamic block and a few fancy expressions. I'm comfortable with expressions, but I've never used dynamic blocks at all, so I wouldn't know where to start.
To be clear, I know curved text is possible, but I'm looking for a curved line (ie an arc) that would look 'parallel' to the arc of the feature line (ie have the same centre point). This would have to be dynamic to allow for different radii and for flipping to the left and right side of the feature line.
I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies View Relatedway to make a perfect symetrical square shape with rounded corners and curvy sides. I know it can be done with the pen tool, but my sides are never really symetrical.
View 9 Replies View Relatedhow to make an image's corners curved.
I'm having the hardest time creating a marquee style image in illustator.. (something like this:
[URL]....
So far i've been able to make the rectangle witht he curved angles, but can't seem to get the circles inside of the marquee..
Any tutorial or a quick guide that can create one?
I've been trying to make a straight chain and make a curved one. I've tried the warp but it only distorts the links and become out of shape. How i would make it curved like the one in the diagram.
View 2 Replies View RelatedWhen I have a cdr file and need to save it as a plt file for my plotter the saved file has several little straight lines to make a curve instead of one smooth curved line. This didn't start happening until I upgraded to Corel Draw x4.
View 5 Replies View RelatedI need to make a roof on a curved building. But when I try with Roof by Footprint it just brings up the error "Can't make footprint roof."
View 6 Replies View RelatedI'm trying to make two pads share a curved edge but they just dont seem to be able to do so. I have to leave a gap between the two pads. If i snap the edge together, while the computer regenerates an error pops up saying pads can share edges but cannot overlap. Whats the deal yo?
View 5 Replies View RelatedHow to make curved lines, slice them into regular rectangles ?
Here is an example :
I did it with the Pen Tool. But it does not look regular at all. I would like to be able to choose the curving angle and the spaces between the small rectangles...
I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
If you look in the attached PDF, I have an elliptical wall that also has changes in elevation. call it a compound radius if you will. What I have to do is to make a wall cap to go on top of the wall. I know, sounds fun.....I have the surface on the right of the PDF and i need to figure out how i can take that shape and have it lay flat so that i can cut this shape out on my CNC. i know I can use the FLATSHOT command, but this will not give me the true shape of the board.
View 4 Replies View RelatedHaving a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
I am currently working in a facade that has a stylized gondola on it. The gondola has curved walls for the sides, and I need to have the curved cut to give it the shape. The tools I know are for straight walls, not curved. and the Opening/wall makes a squared opening, not curved.
View 3 Replies View RelatedI need to emboss ( cut in ) some grooves into a cylinder, but in such a way, so that they won't get narrower. What do you think would be the best way to do that?
View 2 Replies View Related