AutoCad :: X At The Measured Node Instead Of A Point
Aug 22, 2011Working in a drawing that leaves an X at the measured node instead of a point. How can I change this?
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Point Node At 0
Jul 18, 2013I am woring with Civil 3d '14. For some reason all of my points, even though they have assigned elevations, their nodes are at 0.00 which makes it difficult to do any soft of point grading. How to adjust the settings so the point node is at the elevation of the point? The image attached shows a line which was drawn from the node of one point to the node of another point. Notice the z elevation of said line.
View 3 Replies View RelatedAutoCAD Civil 3D :: Point Node Not Selectable
Sep 14, 2012I'm working with some drawings (from others) that have some points that aren't selectable by node (although I can draw a line by points). I've isolated it to the Point Style. Trouble is, I can't seem to find anything out of the ordinary when I go to those settings.
View 2 Replies View RelatedAutoCad :: Add Point / Node To Multiple Circles
Jan 6, 2012I wanted to know if there is a way to add points/nodes to all the centers of all the circles in my drawing with only a few steps, vs picking 700 circles one at a time using( _point) command.
maybe there is a lisp for this?
AutoCAD Civil 3D :: Osnap To A Point Node?
Dec 9, 2013Is there a setting that I am missing where if your osnap is set to node, it will snap to the node if you hover over the point text? I seem to remember this working in versions before 2012.
View 5 Replies View RelatedAutoCAD Civil 3D :: Node Osnap Broken - Point Selection
Dec 13, 2013Back in LDT you used to be able to mouse over point descriptions of dragged state points to get Osnap to select the node. Civil 3D has apparently done away with this, why who knows but its very very hard to know what point your selecting if say you have a bunch of points on top of eachother. Can this be enabled anywhere?
The very mundain work around is to use 'PO to select the point entity, but it does not show the little osnap indicator on the point marker when you use 'PO.
How can I get my old Osnap node selection back?
Intel i7 2600 /z68 Gigabyte
8gigs DDR3 1800
Intel 320 Series SSD
Quadro 600 (1gig)
C3D 2013 / LDT 2009 / Win7 x64
AutoCAD .NET :: How To Capture Point Node Of Text Line By Middle Center
Sep 5, 2011In AutoCad when the text is aligned with "Middle Center" has two points, but in C #, I only managed to capture one of the points using: myText_DBText.Position.
View 4 Replies View RelatedAutoCAD Civil 3D :: Node Osnap Not Recognizing Certain Point Marker Styles?
Oct 31, 2012Is there a reason why the "node" osnap won't recognoze certain point markers? I have recently begun using named plot styles and I have been revising some of our markers to reflect this. I have noticed that some of the point markers (it seems like markers that use a circle as part of the marker) won't show the node marker no matter how I hover around it. Others seem to be normal.
View 7 Replies View RelatedAutoCAD Civil 3D :: Create Feature Line By Snapping To Cogo Point Node
Oct 7, 2013I think this issue started with SP2. I don't remember having these issues in SP1 and earlier.
Create some COGO points at varying elevations.Start a new feature line.Use "node" object snap and pick your first cogo pointIt does not pick up the elevation of the point (it used to)Now draw feature line segments to a few more cogo points entering the elevation each time.It does not pick up the elevation of the point (it used to)Now switch to Arc mode and snap to a few more cogo points.It does correctly picks up the elevation of the cogo points (like it used to)R.K. McSwain | CADpanacea | twitter | Cadalyst tips/code
AutoCAD Civil 3D :: Getting Pave Quantity Measured By Area?
May 1, 2013I want to get my roads pave quantity measured by area , and get its report by step of every 20 meters, how its possible ?
View 1 Replies View RelatedAutoCAD Inventor :: Import And Smooth Out DWG Drawing From CMM Measured Part
Jul 18, 2012I have a drawing that was made using a CMM arm, so the drawing consists of thousands of tiny lines which make up the perimeter of the part. I'm looking to import this dwg file into Inventor in order to make a sheet metal part and eventually a flat layout of it.
The main thing I'm looking to do is "smooth" out the profile, hopefully without having to redraw the part with the dwg drawing as a template. Is there anyway to acomplish what I'm looking to do? I've attached a sample of the dwg.
GIMP :: Brush Radius Was Measured In Pixels
Jan 5, 2014Here are some brushes at radii 0.1, 0.2, 0.3, 1, 10, and 50.I thought brush radius was measured in pixels, or would at least scale in a linear fashion, but this shows otherwise. Why the maximum brush radius is set to a (small) fraction of the full slider?
I just found the Size slider that's separate from brushes... Woops. Radius slider still confuses me, but it's not a problem anymore. I don't see a delete button around, either. :/
Photoshop :: When Creating Contact Sheet Images Appear On Sheet Smaller Than Actual Measured Size
May 28, 2013"Contact page" when images get transported on to page they reduce in size.I have also tried dragging the pictures onto the page but they still reduce in size.
View 2 Replies View RelatedAutoCAD Inventor :: Rename A Browser Node
May 2, 2013I am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have ones for ClientMade browser nodes.
oSubAssyNode.BrowserNodeDefinition.Label = "XXX"
AutoCad :: Taking Dimension From A Node To The Edge Of Arc
Apr 8, 2012I am using autocad 2011 (fairly new to it).
I am having trouble taking a dimension from a node to the edge of an arc.
Attached is a diagram of what i am trying to achieve, i have also attached my actual dwg file.
If you look into the dwg file and zoom in you will see that my arrows do not point to the edge of the arc.
AutoCAD Civil 3D :: Drawing Lines Between Node
Nov 13, 2013im using c3d 2012. whenever i'm drawing lines between nodes and i have my osnap set to node and it picks nodes but i have to be right on top of the node when i pick it so i'm having to zoom in and out a lot. in ldd i was able to hover anywhere over the point text and it still picked the node.
View 4 Replies View RelatedAutoCAD Inventor :: Frame Analysis Node Release Example
Oct 8, 2012explain the circumstances where 'Release' is applied to a beam (node?) when using the Frame Analysis tool.
View 1 Replies View RelatedAutoCAD Inventor :: Change Browser Node Name In Drawing?
May 18, 2013line of Inventor 2013 iLogic that can change the browser node name of an IDW?
Specifically, I'm only interested in changing this:
I know how it's set by default, but someone has managed to fix their template so it only ever shows "A3 template" in this field. consequently, this problem now persists throughout hundreds of drawings. If I can fix it with a line of iLogic, then the wickedly awesome CodeInjector can be used for fixing all the drawings.
AutoCAD Inventor :: How To Change Browser Node Name In Drawing
Jul 1, 2013Is it possible to make iLogic rule to do this:In dwg Place part and in Browser to see part name without extra typing. Not Sheet 1 sheet 2 etc.
View 9 Replies View RelatedAutoCAD 2010 :: Why Does No Node Appear On Left Justified Text
Aug 31, 2012Why does no node appear on Left justified text, yet it appears on right and center justified text?
View 8 Replies View RelatedAutoCad :: Node For A Particular Drawing Is Appearing Extremely Large
Dec 17, 2012My node for a particular drawing is appearing extremely large. I recall there being a set variable to adjust this, but I cant seem to find it.
View 3 Replies View RelatedAutoCAD Inventor :: Rename Browser Node Command
Apr 19, 2012WHAT WERE they thinking when they created the Rename Browser Command. We had someone find out about it and really screw up a bunch of top level assy's. I'm having to WASTE WAY TOO much time fixing them, bringing them back to showing the modified descriptions in the Browser.
View 5 Replies View RelatedAutoCAD Inventor :: Frame Generator Instability Of Node Error
Aug 28, 2013I keep getting Instability of node errors in my Frame Generator. Specifically type 3 at node 62 in direction RY. I am new to FG results seem reasonable just can't get past this error. I tried deleting the member and inserting a new one in its place. The error then goes to another node?
The application is a steel box frame being lifted by a crane, FWIW. when you create special parts for FG and post them from Iparts, where do they go? I need to go back in and alter some properties.
Inventor 2011 Pro 64 bit
Windows XP Pro 64 bit
Dell Precision PWS390
Intel Core 2 CPU 6700 @2.66GHz
7.93 GHz Ram
ATI FireGL V7200
AutoCAD Inventor :: Change Browser Node Icon Using ILogic?
Dec 21, 2012How can I change the default icon that shows up in the browser node in a part file? I found some VB code but can't seem to get it to work with ilogic.
View 7 Replies View RelatedAutoCad 2D :: Dragging (stretching) / Entering Distance - Node Goes In Different Direction?
May 25, 2012If I click on an object, its nodes are highlighted. If I then click on a node (such as the end of a line), I can move that node.
In this case, I drag it to the left and enter a distance (such as 1 foot), with ortho turned on. This should cause the point to move left exactly 1 foot.
When I press "enter," the node moves up or down instead. It doesn't move left like it should have. I think it doesn't move *precisely* up or down, either, but goes a little to the left or right. It does, however, move the distance I typed in.
Why won't the node go in the direction I want?
AutoCad :: Design Walking Track 1 Mile From Starting Point And Finishing At The Same Point
Aug 16, 2011I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedAutoCAD Inventor :: Setting Up Point On Different Layer To Mark Center Point Of Circle?
Nov 15, 2012I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedAutoCAD 2013 :: Lisp / Program That Would Do Light Point By Point Of Fixtures In Plan
Aug 7, 2013I am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
AutoCAD Civil 3D :: Point / Point Groups & Description Keys Are Gone After Crash
Feb 28, 2013Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedAutoCAD Civil 3D :: Draw Polyline From Point To Point Using Imported Points?
Aug 16, 2013Im still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Difference Between Point And Base Point In Parameters
Sep 26, 2013What's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014