AutoCAD Inventor :: Frame Analysis Node Release Example

Oct 8, 2012

explain the circumstances where 'Release' is applied to a beam (node?) when using the Frame Analysis tool.

View 1 Replies


ADVERTISEMENT

AutoCAD Inventor :: Frame Generator Instability Of Node Error

Aug 28, 2013

I keep getting Instability of node errors in my Frame Generator. Specifically type 3 at node 62 in direction RY. I am new to FG results seem reasonable just can't get past this error. I tried deleting the member and inserting a new one in its place. The error then goes to another node?

The application is a steel box frame being lifted by a crane, FWIW. when you create special parts for FG and post them from Iparts, where do they go? I need to go back in and alter some properties. 

Inventor 2011 Pro 64 bit
Windows XP Pro 64 bit
Dell Precision PWS390
Intel Core 2 CPU 6700 @2.66GHz
7.93 GHz Ram
ATI FireGL V7200

View 1 Replies View Related

AutoCAD Inventor :: Nodes In Frame Analysis

May 3, 2013

I have created a report from a frame analysis of an arrangement of I-Beam steelwork. I need to check that I have placed the nodes in the right order and this is reflected in the results of the report. I have the parent and child nodes connected at the ends of the beams as shown on the attached screen shot. I'm interested to know if the order in which I have selected the nods makes any difference to the results. There a 3 node connection points at each corner section.

View 3 Replies View Related

AutoCAD Inventor :: Different Results Between Frame Analysis And FEA

Jan 27, 2013

I am trying to run a simulation on a 4 layer part that has two base layers of I-beams, a frame I made in the frame generator (below) and a solid sheet on top. I am having some issues with the FEA side and was curios to see if the frame analysis tool would yield the same results as the stress analysis simulation. For the frame generator I saw 4 times the amount of deflection despite using (what I believe) are similar loading and constraints, however now I am unsure if I can trust to run an FEA simulation with a frame generated component. The frame is made up of 2 inch steel box beam with a 0.25 inch wall thickness. For the frame analysis package, I have applied a pressure that equates to a 70 kN load across four different sections of the frame. Supports have been placed under all four corners, with 1 being fixed and the other 3 free to move. For the FEA simulation, I applied a similar pressure by creating 2 inch wide plates and applying the same pressure at the same four points. There are also 2 inch square pads under the four corners of the frame with one edge of one pad being fixed and the bottom of the pads having a frictionless constraint. There are separation contacts between both the pressure plates on top of the frame and the frame as well as between the pads and the frame.

with the frame generator is that all the segments of the frame are bonded together (under contacts) which makes sense since they are welded together. However when I put a sheet on top of the frame, there are 3 contact points created between each beam on the frame and the sheet (one on the face of the frame that is in contact with the sheet and the other two on the rounds of the frame and the sheet, even though the rounds are not actually in contact with the sheet). Either way, I am seeing deflections of less than 0.1 mm when a 70 kN load is applied which I know is not right and just want to know if using a frame generated component is not possible with an FEA simulation.

View 6 Replies View Related

AutoCAD Inventor :: Frame Analysis - Trestle (SWL 2t)

Sep 11, 2012

I've attached file. This is trestle and SWL(safety work load) is 2T. How can understandable that this load is going to be withstand by trestle.

View 6 Replies View Related

AutoCAD Inventor :: Frame Analysis - Additional Parts

Jul 5, 2013

Having an assembly, modeled in the frame generator, then with some additional parts (ribs, plates, etc) added to the assembly as parts and constrained with assembly constraints.. which is the best way to do a frame analysis with the frame analysis enviroment for considering  the all structure (frame generators parts + the additional enforcing parts) ?

The assembly look like for example, to this (modeled in autocad).

View 4 Replies View Related

AutoCAD Inventor :: Lost Frame Analysis Menu Bar

Sep 23, 2010

When I go to Environments>Frame Analysis, I used to get a menu for Constraints, Loads and other settings (similar to the Stress Analyisis menu).  I don't get that now.  I can right-click on an existing simulation and add constraints and loads, but I would really like to get the menu back.

I can go to tools>Customize, Toolbars tab and Frame Analysis Panel is there.  I can click Show and it will show the panel but it stays up all the time.  Not what I want.

I have tried resetting the menu, repair installing Inventor and Reinstalling Inventor, but still not joy.  How do I get this back to the original setting so that it comes up when I select Frame Analysis?

This is in 2011.

View 2 Replies View Related

AutoCAD Inventor :: Frame Analysis UDL And Point Loads

Oct 10, 2012

I understand that in a normal part to apply a load to a face is to make it a UDL (uniformly distributed load) by default. To apply a point load, I was told to create a small sketch and use it to split a face to create, in effect, a small face on which to apply a load, effectively making it a point load.

Now in the frame analysis environment, there is clearly an option for 'force' and one for 'continuous force' which the description clearly describes as a uniformly distributed load. However, when I run the simulation (on a 2m long 100mm x 50mm x 4mm Rectangular hollow beam) with a normal load in the middle of the beam (1m offset); the maximum moment comes out at 500000 Nmm or 500 Nm. By my reckoning the moment should be 1000 Nm as the basic formula for a moment from a point load is M = F*D (Moment = Force * Distance). However, to get 500 Nm, it looks like Inventor is using M = (F*x^2)/2 where x is the midspan of the beam (in this case 1m). .is a normal load in frame analysis the same as a UDL? If so..how to I make it a point load?

There are also some errors stating instability of type 2 at various nodes, I've used both Pinned and Floating constraints at either end of the beam.

View 4 Replies View Related

AutoCAD Inventor :: Adding Force In Frame Analysis?

May 2, 2013

I have a question regarding adding a force constraint in the Inventor frame analysis environment. When I add the fixed constraint to the beam the orientation indicator is incorrect - the square indicator being not parallel to the base of the beam. I would like to know why this is and as I am relatively new to frame analysis if I am doing something wrong. I have attached a screen shot of the placement of the constraint on the beam.

Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)

View 2 Replies View Related

AutoCAD Inventor :: Frame Analysis - How To View / Edit Mesh

Sep 14, 2013

Does Frame Analysis uses the finite element method?

If it does, how to view/edit the mesh?

View 4 Replies View Related

AutoCAD Inventor :: Adding New Material To Beam For Frame Analysis

Jun 14, 2013

I am trying to run a Frame analysis on a beam structure. I wanted a specific yield stress for the components that make up the beam. So I created a new material and changed the yield stress and change my beam components to that new material. However when I run the simulation the yield stress is not what I made it. Is this allowed?

View 6 Replies View Related

AutoCAD Inventor :: Using Custom Section Properties In Frame Analysis

Jan 23, 2012

I am busy constructing my own Structural Shapes Library in Inventor 1012.During the Authoring and Publishing step I mapped Cross Section Properties (Ixx, Iyy, Torsional Section Modulus, Torsional Rigidity Modulus etc) to set parameters in my iPart table.

I have noticed that once this part is then used in Frame Generator to create a simple beam and then analyzed with the Frame Analysis tool, the analysis tool uses the geometry of the part to calculate these properties.

Is there a way that I can force Inventor to use the properties in the iPart Tables?  I am worried that any errors in creating the cross section geometry will be carried into the Cross Section Properties calculated by Inventor.

View 2 Replies View Related

AutoCAD Inventor :: Structural Shape Authoring And Frame Analysis

Dec 30, 2010

I created a structural shape profile for use in a project. It is square tube with radiused corners, very similar to "ANSI/AISC (Rolled Steel) Structural Tubing Square" in the content center, but mine is 1 inch square with 0.065 inch walls.

I've made a chassis out of my custom tubing. When I run a frame analysis on it, I get an error/warning stating that the torsional section modulus is zero, because I didn't fill in the value when I generated the frame. How do I calculate that value?

I've attached the tube that I used to make the structural shape.

View 9 Replies View Related

AutoCAD Inventor :: Failed To Connect Solver Frame Analysis

Nov 29, 2010

Simulation Frame analysis crashed when choose button Simulate. Write failed to connect solver.

View 9 Replies View Related

AutoCAD Inventor :: Frame Analysis Makes Assembly And Its Components Grey In Browser

Jan 6, 2012

I have tried the Frame Analysis for the first time and quit from this option as requested.

BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.

Here is some bug. [URL] ....

View 6 Replies View Related

AutoCad :: Release The Frame From Display

Feb 27, 2012

When I plot or run print of a drawing the view port frame is in the display and prints out with the drawing. How do I release this frame from display so it will not print?

View 6 Replies View Related

AutoCAD Inventor :: API - How To Release Document Object Correctly

Mar 27, 2012

I have made a VB.Net Add-In for Inventor 2011, in a few functions it opens one or more files or sets a reference to already opened files. The release of the resource to this documents seems to be the problem.

In PDM (Productstream Pro) we want to change document states and there for the documents have to be closed in Inventor. When using some Add-In functions prior to the state change in PDM, we get a message from PDM that Inventor still has the files open but inventor does not show any open files (of course we can not see files that were opened in the background).

Only manual operation to solve this is to close inventor or open the drawing and the part used on the drawing and close them top down (drawing first, then part).

I'm stuck with open files that don't seem to be open.I think this is because the add-in sets a reference to the part used on the drawing and then changes something in the drawing.How do I release the resources correctly?

View 2 Replies View Related

AutoCAD Inventor :: 2011 Add-In - How To Release Document Object Correctly

Jan 26, 2012

I've created a Inventor 2011 Add-In using VB.Net with VS2008.

This add-in does all kinds of things, but it will not release some documents.

Well I don't know that for shure but it looks like that.

We use Productstream Pro and when changing state of a document it says the document is in use while there are no documents visibly open in Inventor. This only occures when I use my add-in.

Exact steps: Load drawing document from PSPPerform action with add-in which gets a custom iProperty from the Part file used on the Drawing and fills the display name of the Drawing with itSave the drawingClose the drawingIn PSP try to change state of the part file used on the drawingGet message from PSP stating the part is in use
 
In my code I've tried some things to prevent this behavior but non of them work.

I've tried:
Setting unused objects to "= Nothing"Releasing objects using "Marshal.ReleaseComObject(obj)"Calling "m_inventorApplication.CloseAllUnreferencedDocs()" and "System.GC.Collect()" on the "m_appEvents_OnTerminateDocument" event.

View 2 Replies View Related

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

May 22, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?

View 2 Replies View Related

AutoCAD Inventor :: Frame Design - Trim To Frame Fails With Custom Profile

May 20, 2013

I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).

View 2 Replies View Related

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

Apr 30, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?

Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB

View 2 Replies View Related

AutoCAD Inventor :: Notch Or Miter A Straight Frame To Curved Frame

Dec 13, 2011

There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.

View 8 Replies View Related

AutoCAD Inventor :: When Detailing Generated Frame View Shows Elongated Frame Members

Jul 26, 2012

I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.

Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework.  This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.

When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.

;note how the left and right views are different and how some of the frame members are elongated on the lh view.

 I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.

HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012

View 1 Replies View Related

AutoCAD Inventor :: Rename A Browser Node

May 2, 2013

I am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have  ones for ClientMade browser nodes.

 oSubAssyNode.BrowserNodeDefinition.Label = "XXX"

View 2 Replies View Related

AutoCAD Inventor :: Change Browser Node Name In Drawing?

May 18, 2013

line of Inventor 2013 iLogic that can change the browser node name of an IDW?

Specifically, I'm only interested in changing this:

I know how it's set by default, but someone has managed to fix their template so it only ever shows "A3 template" in this field.  consequently, this problem now persists throughout hundreds of drawings. If I can fix it with a line of  iLogic, then the wickedly awesome CodeInjector can be used for fixing all the drawings.

View 5 Replies View Related

AutoCAD Inventor :: How To Change Browser Node Name In Drawing

Jul 1, 2013

Is it possible to make iLogic rule to do this:In dwg Place part and in Browser to see part name without extra typing. Not Sheet 1 sheet 2 etc.

View 9 Replies View Related

AutoCAD Inventor :: Rename Browser Node Command

Apr 19, 2012

WHAT WERE they thinking when they created the Rename Browser Command. We had someone find out about it and really screw up a bunch of top level assy's. I'm having to WASTE WAY TOO much time fixing them, bringing them back to showing the modified descriptions in the Browser.

View 5 Replies View Related

AutoCAD Inventor :: Change Browser Node Icon Using ILogic?

Dec 21, 2012

How can I change the default icon that shows up in the browser node in a part file? I found some VB code but can't seem to get it to work with ilogic.

View 7 Replies View Related

AutoCAD Inventor :: Balloon Customization To Reflect The Hardware Count Per Node

Aug 10, 2012

We are trying to relate to the floor how many pieces of HW should go in partiular places.

The balloon with HW count, unfortunately, gives only overall quantity which is less then useful.

I describe my problem in the graphics area attached.

Should be easy, I guess, but, so far, wecould not figure out the best way of dealing with it rather than we are using now.

View 9 Replies View Related

AutoCAD Inventor :: DOF In Stress Analysis

Oct 20, 2011

I`m trying to determine will Inventor satisfy the needs that I`m having regarding simulation options. So I started with some elementary stuff.

If it is possible in stress analysis to manually select which degrees of freedom body has.

"Fixed constraint" block all 6 DOF and I would like to block only transitional DOF so that I keep rotational degrees of freedom?

View 2 Replies View Related

AutoCAD Inventor :: Rename Browser Node On Part Level With ILogic Rule?

Oct 18, 2011

is it possible to rename the browser node on part level with an iLogic rule? I know that in the assembly environment is an Inventor OOTB functionality to rename the nodes to the filename, Part number or the default value.

Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved