AutoCad :: Release The Frame From Display
Feb 27, 2012When I plot or run print of a drawing the view port frame is in the display and prints out with the drawing. How do I release this frame from display so it will not print?
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Frame Analysis Node Release Example
Oct 8, 2012explain the circumstances where 'Release' is applied to a beam (node?) when using the Frame Analysis tool.
View 1 Replies View RelatedVideoStudio :: Keep A Video Display Its Last Frame After It Ends Play?
Dec 8, 2012Is there a way to keep a video display its last frame after it ends play?
In this scenario lets say I have to overlays each with a video on them.Video A takes half the display and Video B takes the other half - so that they are side to side.
They are staggered in playback where the first ( Video A ) plays first and ends first and the second ( Video B) begins mid-way through when Video A plays.
I would like Video A to not go away after play but rather remain "still" on the last frame while Video B continues playing.
AutoDesk Smoke :: Lost The Pulldown Frame Display?
Nov 27, 2013Have lost the pulldown frame display? If not. How can I access it?
I have attached an image from v2012
MacBook Pro Retina
2.7GHz Intel Core i7
16GB RAM
AutoDesk Smoke :: How To Display Current Frame Number Instead Of Timecode
Oct 31, 2013is it possible to see Frames Numbers instead of Timecode Numbers in Timecode field of the Player or Source monitor?
It is easy to do in Effects Editor but I could not figure out how to change display from Timecode to Frame in Player..
Photoshop Elements :: Send Photos To USB Drive To Display In Digital Photo Frame?
Mar 29, 2013Ive right clicked on the said pics and normally with elements9 it would give me a number of places to which i could sent the chosen frame. But after purchasing elements 11 I am not getting the option to send them anywhere.
View 2 Replies View RelatedAutoCAD .NET :: How To Release DLL File
Jun 9, 2011If I load a dll file into the autocad (using NETLOUD), and after a while I want to make some changes in the dll, then re-build it. In order to do so, I must close the autocad, otherwise I'll get an error ("Unable to copy file,,, because it is being used by another process..."). There is anyway to release the dll so I can change it without closing the autocad everytime?
View 4 Replies View RelatedAutoCAD 2010 :: Which Release Can Import .jpg To Trace Over
Nov 1, 2013I learned Autocad on release 12 and then migrated to r14 and 2001. Nowadays most drafting is done with r14. However I want to be able to insert a .jpg into the drawing
environment and draw lines over it. Specifically, I want to take pictures of Christopher Dressers designs and bring them into Autocad and then trace over them. I feel I will get a huge education into architectural ornament as well as becoming more facile with lines.
I haven't kept up with Autocad's upgrades but undoubtedly the later releases have this functionality. Which one will work?
AutoCAD LT :: Release Date Of Multileader Lines
Aug 8, 2012we have DWG files with multi leader lines, we would like to save these files to an earlier release so that others could access, what would be the earliest date recommended.
View 3 Replies View RelatedAutoCAD 2013 :: Increasing File Sizes From One Release To Another?
Dec 1, 2013I have been revising some older blocks dating back to 2003 and earlier. What was a file size of 28KB increased to 127KB! In most cases the only change was converting text to an attribute. As a test I took a 2004 file and saved it - with no changes - to another name and the file size increased from 28KB to 124KB!!! That's an increase of over 4.4 times! Many of my 1998 - 2006 files are in the 26KB - 40KB range.
That's a bit much of an increase over several ACAD versions! Is there a way to reduce the file size? I did perform a complete Purge before saving. Have I missed some clever trick?
I am running ACAD Version 2014 with SP-1.
AutoCAD Inventor :: API - How To Release Document Object Correctly
Mar 27, 2012I have made a VB.Net Add-In for Inventor 2011, in a few functions it opens one or more files or sets a reference to already opened files. The release of the resource to this documents seems to be the problem.
In PDM (Productstream Pro) we want to change document states and there for the documents have to be closed in Inventor. When using some Add-In functions prior to the state change in PDM, we get a message from PDM that Inventor still has the files open but inventor does not show any open files (of course we can not see files that were opened in the background).
Only manual operation to solve this is to close inventor or open the drawing and the part used on the drawing and close them top down (drawing first, then part).
I'm stuck with open files that don't seem to be open.I think this is because the add-in sets a reference to the part used on the drawing and then changes something in the drawing.How do I release the resources correctly?
AutoCAD Inventor :: 2011 Add-In - How To Release Document Object Correctly
Jan 26, 2012I've created a Inventor 2011 Add-In using VB.Net with VS2008.
This add-in does all kinds of things, but it will not release some documents.
Well I don't know that for shure but it looks like that.
We use Productstream Pro and when changing state of a document it says the document is in use while there are no documents visibly open in Inventor. This only occures when I use my add-in.
Exact steps: Load drawing document from PSPPerform action with add-in which gets a custom iProperty from the Part file used on the Drawing and fills the display name of the Drawing with itSave the drawingClose the drawingIn PSP try to change state of the part file used on the drawingGet message from PSP stating the part is in use
In my code I've tried some things to prevent this behavior but non of them work.
I've tried:
Setting unused objects to "= Nothing"Releasing objects using "Marshal.ReleaseComObject(obj)"Calling "m_inventorApplication.CloseAllUnreferencedDocs()" and "System.GC.Collect()" on the "m_appEvents_OnTerminateDocument" event.
AutoCAD 2013 :: RTEXT No Longer Works In Release R2013
Jun 12, 2012Why RTEXT does not work in AutoCAD r2013?
The below RTEXT string is insert into the drawing and it now longer works in release 2013.
$(GETVAR, "DWGPREFIX")$(GETVAR, "DWGNAME")$(EDTIME, 0, MON DD"," YYYY - H:MMam/pm)
AutoCAD Civil 3D :: Easy Way To Save Drawings Back To Earlier Product Release?
Jul 16, 2012Autodesk should provide an easy way to save drawings back to an earlier product release, like an online converter utility for clients etc... I understand that people need to be pushed to get newer products, however by not having an easy way to change a file, it really punishes those who do stay current and get each release. For many years now I find myself drafing in a current release of Civil3d to utilize the latest features that improve work flow, then having to waste a lot of time converting projects back to each clients file requirement.
View 3 Replies View RelatedAutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
May 22, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedAutoCAD Inventor :: Frame Design - Trim To Frame Fails With Custom Profile
May 20, 2013I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
Apr 30, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
AutoCAD Inventor :: Notch Or Miter A Straight Frame To Curved Frame
Dec 13, 2011There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedAutoCAD Inventor :: When Detailing Generated Frame View Shows Elongated Frame Members
Jul 26, 2012I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
Photoshop :: CS4 Does Not Release RAM
Feb 15, 2009I run Photoshop CS4 on a Windows PC with 4GB. Even though I frequently
"purge", Photoshop does not seem to be releasing RAM even when all files
have been closed, often holding on to some 2GB RAM. Only when I terminate
Photoshop, the RAM it grabbed is released. This means I would have to exit
and relaunch Photoshop many times a day.
Illustrator :: Can't Release Compound Path
Aug 10, 2012I drew some simple paths in Photoshop with the pen tool, then exported the paths to Illustrator. All the paths came into illustrator as compound paths, though they look like simple paths in illustrator. Because they are compound paths, I can't join the ends of the paths to the ends of other paths.
Whe I select one of these paths:
Object>Compound Path>Release is greyed out and unavailable. "Release Compound Shape" in the Pathfinde palette menu is also greyed out and unavailable.
Is there any way to make these paths back into simple paths without redrawing them? I'm using CS6 versions of both Photoshop and Illustrator.
Photoshop :: Sliders Getting Stuck To Mouse After Release (Mac OS)
Jan 3, 2012When dragging various sliders in Photoshop CS5, very often these sliders get "stuck" and move with the mouse even though you have released the mouse. Say you are dragging a slider to set the brush opacity to 50%. When you have set it to 50%, you release the mouse and move it away from the slider, only to find that the opacity still increases or decreases as you move your mouse. You have to click again to fix this, but then of course you have to go back and do it again.
Below is a small illustration (I can't take a screenshot of my mouse) of an example of when this happens:
This happens to me around once every 5 times I use a slider, i.e. extremely often. As you can imagine, it's very annoying and frustrating.I use a Wacom Bamboo Fun tablet, and I never use Photoshop without it so I cannot confirm whether this bug happens with a mouse or just the tablet.It doesn't just happen like on the above illustration, but also with any slider such as those in Adjustment Layers and Filters.The bug does not happen when using tools on the canvas. So the Brush tool, and every other tool, works fine and never gets "stuck".I have the latest version of Photoshop CS5.This is a bug that has always been in CS5 since the first version, and it has not been in previous versions of Photoshop.
Late 2008 15" MacBook Pro
OS X Snow Leopard 10.6.7 (but the problem has existed way before 10.6.7)
Photoshop CS5 version 12.0.2
Photoshop :: Does Not Release Memory After Closing Document?
May 27, 2012When I close a large document Photoshop does not release the memory. If I open another document the program is slow and not resposive. If I close out of Photoshop and restart it then load the other document it is quick and responsive again.
View 12 Replies View RelatedCorelDRAW X6 :: Won't Release Memory After Files Are Closed
Apr 5, 2013The memory the program is using balloons over time because it does not release memory after you close files. In the course of a day, the memory the program uses gets into the 8-10 GB range (we have very large files such as vehicle wraps and large full color signage). The program will start and occupy under 100mb of memory and then when you open a file it will allocate the memory for that file (say 1 GB). Then when you close that file, the memory isn't released or even re-addressed (it just seems to be in limbo at that point). So after 2 dozen or so files the memory the app is taking up gets into the multi-gigabyte range....even without a single file open (the app is running with no open documents).
Now the system I am running has 12GB of ram, so I am not running out of memory yet, but it is still quite alarming to look and see only 2 GB of ram free on a 12GB system with no open files...
I cannot imagine why the programmers wouldn't have the app release the memory it's using. That seems like really sloppy coding to me. (programming 101: when your app is done with memory, release it.).
The system configuration is as follows:
Core i7 980X 3.33Ghz (6 physical cores with hyperthreading), 12 GB RAM, 4-way RAID-0 SSD HDD array, Windows 7 64-bit, Corel Suite x6 (updated to 6.3).
Illustrator :: Why Does A Selection Release After UNDO Function
Mar 6, 2014Why does a selection release after UNDO function? Older versions didn't used to. It's annoying to have to re-select after each time you undo.
View 6 Replies View RelatedIllustrator :: AI CS6 Won’t Release Fonts / Not Even When It Closes
Aug 26, 2012I went to the Character panel and from there, I opened the list of installed fonts on my system. As I browsed the list, I spotted two fonts that I wanted to delete. When I tried to delete them, Windows 7 displayed a “Can’t delete — fonts in use” message. I closed Illustrator, and tried again to delete the two fonts. Again, I got the same message. I’m going to have to reboot to delete those fonts plus some others I’ve since identified. Doing that is a pain in the xxx because I’ve always got a bunch of stuff open.
Illustrator needs to release all fonts except those in use in the current document. I should be able to delete any other fonts at any time. If Illustrator or any other Adobe program is displaying a list of fonts at the time I delete a font, it should dynamically update the list.
Illustrator :: Brush Stroke Doesn't Appear Until Release The Pen
Sep 22, 2013I'm using a basic custom brush which reacts to pressure, and whenever I make a brush stroke with my stylus, the line doesn't appear until I lift my pen off the tablet. It's a seemingly random occurence, although it occurs in both my work (CS6 / Win7 / Intuos3) and home (CS6 / Win8 / Intuos4) setups.
View 8 Replies View RelatedIllustrator SDK :: How To Make Release Packet For Plugin
May 6, 2013I'm completed my plugin and want to make release packget.My plugin have two parts:
1. UI write FlashUI abcUI.zxp
2. Control write by Illustrator plugin abc.aip
The same StrokeFilter and StrokeFilterUI project.Now I want to combine they. And make setup program to release (no need to use Adobe extension and add plugin in Illustrator manual)
Illustrator :: Release All Compound Paths At The Same Time?
Jul 20, 2010Platform: PC/Windows XP SP2Adobe: Illustrator CS3 (13.0.2)
Is it possible to release all compound paths in an illustration at the same time (and if so - how)?
I receive drawings from engineering in either PDF or CGM format, which I edit in Illustrator and save as AI. I have to release compound paths in order to delete specific parts of the drawing.
This isn't difficult, but it is very time-consuming because the CGM(or PDF)-to-Illustrator conversion results in quite a few compound paths.
Illustrator :: Can't Release Clipping Path / Can't Ungroup Objects
Jul 18, 2013I'm working with another artists's file, and I can't seem to release the clipping mask he created. When I try, I get an error message that says, "Can't ungroup the objects." I've tried releasing Compound Paths, but I get the same message.
View 4 Replies View RelatedPhotoshop Elements :: How To Release A File In 12 Stuck In Edit Mode
Mar 17, 2014I have a PSE 12 file stuck in the "edit mode". I ran completed a repair and an optimize on the catalog and the file is still stuck in the edit mode--I can't even delete the file from the catalog as the "delete" option is grayed out.
View 1 Replies View Related
