AutoCad :: Using It For Island Mapping?
Aug 16, 2013
I am looking to draw a large lake that I live on that has 14,000+ islands. I have started drawing small sections by bringing in high quality maps and tracing them using the spline command. Is there a faster way to trace the entire lake.
I want it to be all drawn with closed poly lines so that I am able to laser cut it and apply hatching. Other tracing programs in which I insert a image of the lake and it gives me the CAD format are very inaccurate and a pain to work with.
View 9 Replies
ADVERTISEMENT
Jan 16, 2012
I opened up a drawing which had a hatch over an area, and after deleting some text from within the hatch extents, found that the hatch didn't ignore the text & put the hatch behind it, rather, it created an island around the text to avoid a hatch/text clash.
I've removed a few pieces of such texts, and now have a bunch of rectangular holes in my hatch where the texts used to be. How can I remove these islands completely without having to re hatch the whole thing again?
(I realize I could simply minimize the size of the island by picking the four corners/vertices of the hatch and bringing them closer together, but this is a messy solution)
View 2 Replies
View Related
May 4, 2012
I am having trouble hatching an object using the island detection feature to accent an object within the main hatch pattern. I am using R14.
View 2 Replies
View Related
Jan 1, 2012
I have a map of an island. I am trying to copy and object say a block or triangle into the certain areas of the island several times. How can i do this using the command.
View 4 Replies
View Related
Dec 3, 2013
I am using AutoCAD Map 3D 2013 version. While using SuperHatch (with Block option) in island polygons, the command creates 2 extra lines. see the attached screenshot. The 2 yellow color lines are extra lines.
Is there any option or setvar to switch off these 2 lines or control this behaviour ?
View 1 Replies
View Related
Mar 28, 2012
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
View 5 Replies
View Related
Jun 28, 2007
I am trying to make an island just like in this picture.
How do you do it or where can i get the brush?
View 1 Replies
View Related
Dec 10, 2004
Ok here is question for everybody, what are the top 10 must have plugins for CS? IF there are even 10. I mean what plugins, do you use on a regular basis regardless of your primary use of photoshop.
View 5 Replies
View Related
Feb 10, 2003
Im going to try and create a varient on that scene that PS 7 has when it loads to open. How do I make the beach with the small waves rolling onto it?
View 4 Replies
View Related
Apr 21, 2010
Let's say a have an image mask (see image shown below) where the white areas are the selection islands and then apply that to an image. What I want to do is get the average color for each selection island in that object. Just blurring gives you a gradient effect and if you blur too big, you just get a single color. That's not what I want.
[URL]
View 19 Replies
View Related
Mar 1, 2014
I'm drawing a map of an island and I want to have the colour blue surrounding the island representing the sea. But I want the blue to gradually fade into nothing. I've tried to use the sray can but its just doing weird things with rectangles!
View 3 Replies
View Related
Oct 20, 2011
I am trying to create an Island family with cabinet components nested into the island family. I have included both a 3D view of what I want the island to look like and a floor plan of what I have right now. I want to be able to adjust the size of each of these cabinets with a parameter. But I am not sure how to get them to stay lined up like they are right now.
If I change the size to a larger size the center cabinet overlaps the cabinet on the right. but if I add another reference plane to the right side of the center cabinet, when I try to adjust the size I get an error message saying "Constraints are not satisfied".
View 8 Replies
View Related
Dec 10, 2011
I have some paths covering several shapes (Islands, to be precisely), and they've been merged into a path file and bounced over a few documents. I'd like to select the path for just one of those islands so I can move and scale it. Is there anyway to separate one closed path for the others in the same merged file?
View 4 Replies
View Related
Jun 10, 2013
I have the attributes and units I want mapped between the shp file and the import wizard but everthing still imports with default values. (like pipe size or elevation.)
The only thing that is correct is the location. I see a few people have reported this but there aren't any solutions.
View 4 Replies
View Related
Jun 5, 2012
I am using civil 3d ver 2011. I have been asked to do a mapping project that will be compatible with ESRI ArcGIS. THe project consists of mapping of waterlines. The only data collected will be waterlines, hydrants, valves. Attributes required would be Size, Depth, Material, NEZ. What is the best way to do this? I know that civil 3d has autocad map built in, but but am not sure how to assign the size, depth, etc to the entities.
View 3 Replies
View Related
Jun 9, 2011
I have connected to several raster images and they are displaying as required and I've saved this drawing. I've created a new drawing and when the previous drawing is xref'd in the images are not present.
View 3 Replies
View Related
Nov 26, 2013
I am a surveyor in a multi-disciplined office. There has been talk of working in 3d. I have had lots of issues with 3d line work on general projects
For example, when you bring all the points in at elevation, and draw lines between them, we have issues with line patterns and querying distances. How are others handling this, or is there a setting to turn off the z?
View 9 Replies
View Related
Jan 17, 2013
I am having some mapping difficulties with regards to applying a JPEG as a material map onto a surface material. Below are the details.
I have a surface model which was generated from topographical information. I have aerial photography of the area the topographical information is based on. The photography covers approximately 1000m2 area.
The topography area in contained within this area, it is in the upper right hand corner of the square photo. I have applied planar mapping to the surface . I resized the mapping area of the surface to suit the area that the photo covers (I created a boundary rectangle and adjusted the mapping size to suit). I created a customer material using the jpeg photo I applied it to the surface . The image scale is set to 1000 . All other settings remain as default settings.
The mapping displays over my model, but its on the wrong location, i.e. information contained within the jpeg that is out with the topographical area is appearing on the model. When I turn off tiling the mapping disappears from my model completely. I have read a few tutorials today and went back to basics on a few trials by creating blocks and applying the material and scaling it that way. All behave as anticipated. Apart from this.
View 1 Replies
View Related
Oct 12, 2012
I'm having an issue within the DGNIMPORT command related to a mapping setup that only partially maps..
I'm using the DGNIMPORT command in a nearly empty civil3D drawing. I created a mapping setup to map over the levels to layers, the line styles to linetypes and the line weights. The levels successfully become layers, the lineweights are mapped appropriately... but the Linetypes are NOT.
I've attached two screen shots to illustrate the issue. The first shows the window with my mapping setup.
The second shows the 'preview' for the setup (Microstation Linestyles 1,6,7 are sent to continuous instead of to the 3 line types I created for the mapping process...)
View 1 Replies
View Related
Feb 17, 2012
I would like to use AudoCad 3D to do real time pit geology mapping. I have a AudoCad 3D on a tough which is equipped with Bluetooth. I have a Tremble 5800 rover which is also equipped with blue tooth, and I would like to connect the Tremble with AudoCad so I can see my position in real time while I'm mapping with AudoCad.
View 2 Replies
View Related
Nov 25, 2011
I'm using AutoCad 2007. I'm trying to map a simple 2D flat drawing onto a curved surface.
I have a 3D drawing of a very simple curved floor, similar to a skateboard ramp or a photographers infinity curve backdrop. I also have a 2D design. I simply want to drop my 2D drawing onto this curve, so that it follows the geometry of the curve's surface.
View 8 Replies
View Related
Apr 16, 2013
When using "convertpstyles" to convert from ctb to stb I am asked to select a stb file. When I do I am given an error that says the color mapping table I have selected does not contain a color mapping table and cannot be used to convert the drawing.
View 1 Replies
View Related
Dec 4, 2013
I would like to map an image to the face of Inventor part document. Which possibilities Inventor API offers here? I checked out the ColorMapping example but the tessellation of the flat surface is not sufficient to get high resolution image mapped on it. My intention is to attach images to several parts faces within the assembly environment and this as fast as possible since the scene needs to update very quickly.
PS: I use C#.NET.
View 1 Replies
View Related
Jun 18, 2012
I have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.
View 9 Replies
View Related
Jul 22, 2013
I'm using AutoCAD Architecture 2012 for interior design. I need to rotate/move some materials, I know how to do it, but after mapping it, when I need to make any drawing modification, the mapped material resets to their default, and not ionly the modificated solid, but everything that I have mapped.
How do I save the mapping coordinates, to avoid the need to map everything everytime?
View 1 Replies
View Related
Feb 19, 2012
I am trying to alter the properties of a mapping layer file I have created so that both the block and the text value are oriented horizontal on my sheet no matter where north is pointed.
View 2 Replies
View Related
Nov 13, 2013
If i have a GPS Survey which i can create a surface from and 2D mapping from GIS records, is there any way to turn the 2D mapping into 3D using the surface data?
View 1 Replies
View Related
Sep 21, 2012
I cant seem to target a corridor FL and keep it linked to the corridor. Is this the expected behavior? I would think you should be able to, no? For that matter I would think you should be able to pick the cooridor link directly, no?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
View 2 Replies
View Related
Nov 19, 2012
I am trying to map values to my title block using an autolisp routine. I have entered (getenv "NEXTSHEET") & (getenv "PREVSHEET") into the descriptions fields and mapped these routines to 'NEXT_ATTRNAME' & 'PREV_ATTRNAME' attributes. When I run the title block updates no values appear on my drawing. Please note that I have included the program in my start-up suite. Please also note that when I enter 'NEXTSHEET' or 'PREVSHEET' on the command line, the routines are called and the correct values are shown on the command line. I just need these values to be visible on my drawing. I have attached the Autolisp routine that I am running.
View 3 Replies
View Related
Oct 17, 2013
i start in a new position for a new company noticed they have several cuix menu files for blocks such as structural shapes and weld symbols. so i loaded the menus with menuload and map to the directory of the blocks reference in the options files tab, but when i select the menu if has the block mapped to a different drive that does not exist. how can i change it to when i select, for say a w6x9 to map to the correct block on the correct drive instead of mapping it to some s: drive the directory structure is correct but the drive letter is not.
View 7 Replies
View Related
Jan 29, 2013
In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies
View Related