When using "convertpstyles" to convert from ctb to stb I am asked to select a stb file. When I do I am given an error that says the color mapping table I have selected does not contain a color mapping table and cannot be used to convert the drawing.
View 1 RepliesIs there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
I have the attributes and units I want mapped between the shp file and the import wizard but everthing still imports with default values. (like pipe size or elevation.)
The only thing that is correct is the location. I see a few people have reported this but there aren't any solutions.
I am using civil 3d ver 2011. I have been asked to do a mapping project that will be compatible with ESRI ArcGIS. THe project consists of mapping of waterlines. The only data collected will be waterlines, hydrants, valves. Attributes required would be Size, Depth, Material, NEZ. What is the best way to do this? I know that civil 3d has autocad map built in, but but am not sure how to assign the size, depth, etc to the entities.
View 3 Replies View RelatedI am a surveyor in a multi-disciplined office. There has been talk of working in 3d. I have had lots of issues with 3d line work on general projects
For example, when you bring all the points in at elevation, and draw lines between them, we have issues with line patterns and querying distances. How are others handling this, or is there a setting to turn off the z?
I want to know if you can link AutoCad tables to other Autocad tables on different layouts. Say I have ten sheets, each with a table for quantities of pipe length, and one sheet with a total of all quantities. Can I link cells from each separate layout sheet to the main table sheet, so that I can add them all for project totals?
View 3 Replies View RelatedI'm having an issue within the DGNIMPORT command related to a mapping setup that only partially maps..
I'm using the DGNIMPORT command in a nearly empty civil3D drawing. I created a mapping setup to map over the levels to layers, the line styles to linetypes and the line weights. The levels successfully become layers, the lineweights are mapped appropriately... but the Linetypes are NOT.
I've attached two screen shots to illustrate the issue. The first shows the window with my mapping setup.
The second shows the 'preview' for the setup (Microstation Linestyles 1,6,7 are sent to continuous instead of to the 3 line types I created for the mapping process...)
If i have a GPS Survey which i can create a surface from and 2D mapping from GIS records, is there any way to turn the 2D mapping into 3D using the surface data?
View 1 Replies View RelatedI cant seem to target a corridor FL and keep it linked to the corridor. Is this the expected behavior? I would think you should be able to, no? For that matter I would think you should be able to pick the cooridor link directly, no?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
I have attached two images of a young girl. One image (the original) is the one with the busy background. The second image is the one that I have cut out. Now with the pattern I have inserted behind her, the image seems quite acceptable, but if it as a plain white background, there is still some areas around the hair strands that contain the bluish background. Also to get to the stage of my image, I had to delete some of the whispy hair strands to make it look acceptable.
My question is, do you think it is possible to cut this out any better. This was done using the Color mapping method, but I have tried a number of other methods, but cannot seem to keep the hair strands visible and still end up with some color contamination around them. Do you think you could try this image and see if it could be done better.
OK...so when I copy the desired cells form the excell worksheet and paste to paintnet, it works fine...the entire range of cells copied show up in the paste, but...if you first eliminate the gridlines in excell before copying the range of cells, the paste into Painnet only shows one section/quadrant of the excel range of cells which I copied. I don't want the gridlines showing in the final .png file...I know this must be possible...
View 3 Replies View RelatedI was wondering what is the best way to save a photoshop file such as a business card or stationary labels so they "KEEP" their color you see on screen.
I am already building in CMYK mode. My Client has a nice gray scale scheme but I am worried that the print shop will mess up the colors.
How do I create a custom set of colors and adhere to that scheme throughout the clients stationary and media.
ie. Cards, Labels, Signs, etc.
Is there an option to print a color scale along with the image, sorta like when you calibrate your printer?
What I'm trying to do is to use set cell background color to change the color based on whether or not there is text in the particular cell.
I want LtCol to be 161 and HvyCol to be 211, and I'm not sure how to set this up...all it does at the moment is change the color to black.
My code so far:
Dim TableObj As AcadTable
Dim EntObj As AcadEntity
Dim i, j As Long
Dim LtCol As AcadAcCmColor
Dim HvyCol As AcadAcCmColor
[code]......
We want to substitute drawings with a color-palette. This means, we have to set different colors to different kind of features ( i.e. H7-fitting to red, thread to yellow, ....). We do this manually by now.
I mean, if on makes a fit-hole then automatically it appears in red. All threads he makes are in yellow and so on. Is there a chance to make a feature-based color-table in inventor and if it is so.
I have created subroutines to build tables in AutoCAD.
What I would like to do is to is if a value in the table list (example a question mark), then make the background color of that cell color 1 (red).
List to insert as a table -
(setq List_Table (list (list "A" "?" "C" "D" "E") (list "11" "12" "13" "14" "15") (list "21" "22" "23" "24" "25")))
(Build_Table "Title" List_Table 3 5 0.1 1)
Here are the subroutines -
(defun Build_Table (TableName List_Table NumRows NumColumns RowHeight ColWidth /); P0 Table_Obj KW KK KT KL Blocks_Obj Block_Obj Block_Id)
;--set table scale-------------------------------------
(setq Dscale 1.0)
;--get location----------------------------------------
(setq P0 (vlax-3d-point (getpoint (strcat "
[Code] .......
I'm able to print pasted excel table with default colors ( ie: cell with text and fill with color background in autocad. By using Autocad 2013, with I can see the default colors when preview, but once I printed out to hard copy or PDF format, its only printed text but without any color background, I have try to print the pdf file by using DWG To PDF.pc3, Adobe PDF & CutePDF Writer, HP Design Jet T1120 plotter, all have the same result.
View 8 Replies View RelatedAnytime i have to go backwards it is such a hassle. In this case i need to convert it to 2010 with no aec objects.
I have etransmit to 2010 exploded aec, but the wipeouts become 3d faces. I feel i spend way more time then it should take. Are there any third party softwares?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Any pdf converter that supports 64 bit and works with the huge pdfs I'm getting.
The dwg does have aerials in them.
The following snippit of code is changeing the color of text in a cell of an AcadTable. It will set the color to an RGB value and works great. But what if the color is a normal color 1 through 255 from autocad's pen table. How would I set the cell text color?
(setq objColor (vla-getcellcontentcolor eVLAMT R C)) ;sets a Color Object, whatever that is
(vla-setrgb objColor RED GRN BLU) ;sets the new color of the Color Object
(vla-setcellcontentcolor eVLAMT R C objColor) ;sets that new color object to the cell
Creating a CTB file to mimic a Microstation pen table? I have a client supplied *.tbl (an intergraph pen table file I believe) and how to generate a CTB that will behave similarly (ie. plot nearly the same)..
I can open the *.tbl file in a text editor and it just looks like a bunch of "if, then" statements related to line weights and pattern files....
I have already created a template with the same layers/levels, colors, linewights, etc... (and can convert everything to dgns), but now I need to figure out how to get similar plotted results from both sets of drawings (the dwg and the dgn..)
Is there any way converting surface to 2d hatch ? I am making plan view to show materials used to make my road , to do that i need to hatch all the plan in different hatches ( for example sidewalks - green, paves -yellow, shoulders - brown... ) .
I could try hatching closed polylines made from corridor feature lines , but i get often an error that my boundaries aint closed . SO i started to think , maybe there is a way to do something from surfaces.
I am trying to convert my corridors to solids and under toolspace-settings-corridor-commands there is a command called export corridor to solid but this option is not coming up in my toolspace.
I made this original file in civil 3d 2013 but am working on in in civil 3d 2014
I have imported a wire frame as a dxf file from another 3d modeling program and want to know how to convert it to a civil 3d solid.
View 6 Replies View RelatedI am doing a little trial and error on possibly converting a drawing from .ctb to .stb. When we start a new drawing, it will be started using named plot styles so it shouldn't be an issue. But there are times when we receive a drawing from someone else and need to convert it.
The first thing I did was convert ctb to create a conversion .stb. Then I used convert pstyles to convert the drawing to named plot styles. For the plot style table I chose the conversion .stb I just created because it needs a color mapping table.
But I don't want to use the converted .stb table, I want to use my company plot style. So when I am in layer properties manager, Plot Style is still grayed out and I can't change it.
When I type in pstylemode, the default is 0 (read only). How do I change it so it's not read only and I can use my own plot style table?
I have some polylines that mark the edge of roadway and around the curves there are arcs in the linework. How do I turn the polyline with arcs in it into a polyline with vertices, say, every .5' or so along the curve and turn the curve into a polyline? I tried the pedit and using decurve but it doesn't work well.
Using C3D 2012
I have a project that I need to get GIS data converted to CAD so I can edit in CAD. I am not looking to convert it back to GIS. I've tried the Export to CAD but all I get is line work. The GIS data is for water, sewer & drainage. I need to get the manholes, valves, etc. Not being familiar with the GIS software (ArcGIS) Maybe part of the problem is not using a seed file in the conversion.
View 9 Replies View RelatedI am using C3D 2012 and i know how to create a table showing volumes for different elevation ranges with different colours, but how to show the total cut or fill for the volume surface in the same table so that you dont have to manually add up all of the cuts or fills? or have to display only two ranges?
View 1 Replies View RelatedI am trying to create a line table. Here are the steps I am following :
First I label the lines I have drawn using a line label type for example Bearing over Distance, then I am going to the Annotate tab, Add Tables, Add Line and Curve and once I get to that dialog box I select my table style that I have already created and the label style I chose to label the line and click on the "apply" box and then "ok" and I see the labels such as L1, L2, etc. and all looks good, except now when I go to use that label style Bearing over distance to label another line, it labels the line with the tags and not the bearing and distance, its like the style is now defaulted to labeling tags and not bearing and distance anymore.
Is it bad to make a structure table from a DS? I find I get missing data when I do.
View 2 Replies View RelatedI had a table in a drawing on layer "Text" and I changed the layer of the table to "Text - Frozen" Then I decided I wanted the table back on layer "Text" and something strange happened. The text in the table appears to be on the layer "Text" but the lines which make up the table are still on layer "Text - Frozen". So when I freeze "Text - Frozen" I get only the content of the table with no lines. When I select the table, it is indicated that it is on layer "Text".
View 1 Replies View RelatedI have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies View Related