AutoCad :: Submit Metric Drawing For Proposed Borehole
Aug 30, 2011
I am very new to Autocad. Last time I used it was around 1996 and it is a whole new beast today. I am using Autocad 2012 at the moment.
I need to submit a metric drawing for a proposed borehole amongst utilities that I have been forwarded in .dwg format. The scale needs to be 1:250. I have copied and pasted the utilities information into a new drawing, where I've added my borehole with dimensions, company title block, and some additional notation.
In a system where scaling seems to be varied by zooming, plotting, and drawing - how do I achieve 1:250 scale for submission of this plan?
I have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
We have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
i have a drawing from a client that is in metric and i need to print the drawings in inches in 1:1 for my boss. i should know this but it seems to be a bigger problem than i thought.
I am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
how to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
I have an existing drawing that was created in AutoCad 2012. I now have AutoCad mechanical 2013 and when I try to insert a steel member into the drawing (metric) the member inserts very small. How do I solve this problem and get the shapes to insert at the proper scale to the drawing?
i can't find this tool, it's a borehole importer.i am using civil3d 2012 with students ver.Where can i find Borehole import?Is this tool restricted for student ver.?
I am using subscription with Revit DB LINK, but Borehole importer can't use.
I got a few boreholes in a test drawing and i want to join the various strata horizons (with 3d polys or something) to create surfaces.
Each borehole has several points organised in groups (input via the Borehole Importer Tool) I have gone into a SW isometric view but cannot snap to any of the points that are "below ground". I have got Node OSNAP on but can only select the topmost point every time
Whilst I could create surfaces based on the point groups this will give rise to geologically suspect surfaces so there is a bit of manual interpretation work needed.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I would like a few rules to be triggered once the new drawing template is opened.select sheet size, I have been given a rule that already works, basically the rule selects a border and title block based on sheet size selection.
I would also like a rule to let me annotate in metric or imperial. this is where I require assistance. I am not sure the best way to achieve this rule. My programming is very basic.I have found some links here, but I can't seem to make them work in the drawing environment. Also these rules seems to change the units of an already created .ipt.
Rule #1 Link
Rule #2 Link
I am just looking for a rule to select either .in or mm from the styles library(i think) , before I even place a base view. Regardless of the original units used to make the model.
To convert from imperial to metric multiply the length, in inches, by 25.4 (the number of millimeters per inch).
Example: 3 inches converted to millimeters is 3*25.4 or 76.2mm.
To convert from metric to imperial multiply the length, in millimeters, by 0.03937 (the number of inches in a millimeter). For greater accuracy use 0.03937008.
Example: 100 millimeters converted to inches is 100*0.03937 or 3.937 inches.
I was wondering if there is a way to print proposed lines in color, yet still have everything else print in monochrome.
Currently we print using monochrome, but would like to have our proposed line work stand out even more by selecting them, and having them print out in color.
Is there a way to do this without having to set all the other layers to a grey scale manually.
I had a proposed surface in Civil3D2010 that was fine, made revisions to the proposed contours using grips or deleting/adding contours. Now when I try to add the new contour data to the surface either the program hangs up or I get contour error messages and the surface never gets re-built.
I'm a bit of a Civil 3D newbie. I've got a project that involves addition of storm drain to existing storm pipes. I'd like to be able to use Civil 3D to include existing and proposed pipes in the networks, but be able to show existing pipes differently than proposed pipes on plans and profiles, i.e. screened. I can't seem to figure out a way to do this--I can effect changes to all networks, but not invididual pipes.
I need to submit files in JPEG for printing. I started with a 105 MB TIFF file in PS and when I save as JPEG on quality 12 I end up with a 5 MB JPEG. Does this sound right - I am wanting an A3 print.
The engineers at my company digitize proposed contours in a drawing and then they want me to create a surface out of the contours....the contours usually are 2 foot contours with areas that the software tends to translate based on the contours that I selected to create the surface.....I then usually need to create a profile, which does not look accurate compared to the contours, such as low spots etc...............
My question is since the engineers at my work do not how to use the software, and I am not an engineer, making the profile look a certain way sometimes needs to be tweeked by me.... How to alter the proposed surface?I am pretty sure that feature lines cannot cross contours that I have selected to create the surface?
I am trying to create a proposed surface using grading. I created a closed polyline representing the site's outer boundary then created a feature line from it. When I try to select the feature line in order to create the grading I get "THIS FEATURE OVERLAPS ITSELF AND CANNOT BE GRADED".
Twice now using PSP X4 I have got a message encouraging me to complete a 5 minute survey. I take the survey, press submit at the end, and get an annoying window to a Corel X4 ad page with no browser controls. The please take a survey message window is still there underneath. When I close the Corel X4 ad window, is asks if I really want to cancel?
I need to convert images to CMYK to submit photos for an article. I know Photoshop will convert, but don't know which software. If Lightroom does not convert to CMYK, which would I need to get?
