i can't find this tool, it's a borehole importer.i am using civil3d 2012 with students ver.Where can i find Borehole import?Is this tool restricted for student ver.?
I am using subscription with Revit DB LINK, but Borehole importer can't use.
I got a few boreholes in a test drawing and i want to join the various strata horizons (with 3d polys or something) to create surfaces.
Each borehole has several points organised in groups (input via the Borehole Importer Tool) I have gone into a SW isometric view but cannot snap to any of the points that are "below ground". I have got Node OSNAP on but can only select the topmost point every time
Whilst I could create surfaces based on the point groups this will give rise to geologically suspect surfaces so there is a bit of manual interpretation work needed.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am very new to Autocad. Last time I used it was around 1996 and it is a whole new beast today. I am using Autocad 2012 at the moment.
I need to submit a metric drawing for a proposed borehole amongst utilities that I have been forwarded in .dwg format. The scale needs to be 1:250. I have copied and pasted the utilities information into a new drawing, where I've added my borehole with dimensions, company title block, and some additional notation.
In a system where scaling seems to be varied by zooming, plotting, and drawing - how do I achieve 1:250 scale for submission of this plan?
I have it installed, I have the plugin "loaded" and "auto-loaded", but when I try to import a .3ds file, there is no geometry or anything. I see "Transform1" in the Outliner, and I don't really see any errors.
I tried playing around with windows, hit "show all" on everything I can find.
1. I have updated my Mac Pro to Mavericks; and
2. I have downloaded and applied the patch that was released.
I can open, edit, and export my files just like pre-Mavericks; however, when I go to import them into Premiere via Import, I get an import error:
"The importer encountered a generic error."
Oddly, when I look at the exported files in Finder (which, by the way, do not throw an error during the export process -- I have clean logs), I don't have a preview thumbnail like I did before. Now, it's a placeholder Quicktime logo. Hitting space bar to preview them only offers the information window, which show "Zero KB" as the file size... but in Finder, it clearly shows the correct file size.
Opening the files in Quicktime gives me a "converting" message before opening (these are .MOV files that shouldn't need converting at all), and exporting them from QT won't allow for an Alpha channel, ruining the transparency of the lower third.
importing FCP XML, I get the error "The importer reported a generic error", Why? How do I import correctly? I did file> import, but got the error I noted.
View 3 Replies View RelatedHow can I make my lightroom 5 program the default importer of my photos? I have an iMac and the photos are loading onto ithe Photo program rather than Lightroom.
View 2 Replies View RelatedWhen I (am force) to use the Video Importer (because my clips are on a USB drive) it seems to find and select all videos on this USB drive. This is not what I want. I want to browse to the directory (on the USB drive) that I created. It contains the 6 video clips I want to import, not all 300 on the drive.
How to I select a specific directory on the USB drive using Video Importer
I'm using Premiere 12.
I get the following message when I try to access it from the menu.
"EditInSSA cannot be used because the optional feature is not installed on this machine"
When I look to modify a deployment I cannot find the option to add SSA.
I had a crash with Windows Vista - go figure - and I had a backup copy of Civil 3D 09 on an external drive. I am trying to do a flat install but everytime I click on setup it gives me an error message " The copy functions cannot be used. Failed to copy the following files: SetupRes to C:UsersDavidAppDataLocalTemp\_AIA.tmp.
View 2 Replies View RelatedI've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running, it comes up and says it can't find any install of Civil 3D 2012..
Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".
I'm trying to decide whether it is worth keeping up with the C3D releases every year. One thing I wanted to try was to see if 2014 worked any better on the key things I need, but I don't want to stuff up my 2013 installation. know if I can do a separate install safely?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
I'm preparing for our office wide install of Infrastructure Design Suite 2014 so we can begin training/using Civil 3D 2014.
I’m reading through readme file for the Architecture-MEP 2014 Object Enabler & noticed that it’s installed as part of the normal installation of all AutoCAD 2014 based products, including Civil 3D…woohoo! Unfortunately, the Structural & Plant OE’s don’t appear to have a readme file. Are these also installed as part of the normal installation of C3D 2014? Or will they need to be installed separately?
We have 2011 installed have customized some of the .XSL reports in ProgramDataAutodeskC3D 2011enuDataReportsxsl
After installing 2013, the %ReportDir% variable for 2011 is pointing to the 2013 install, where the reports have NOT been customized. So when you run a report in 2011, it is using the XSL files in the 2013 location.
So the long and the short of it is the 2013 install broke our 2011 custom reporting ability.how to control the %ReportDir% variable in 2011?
[URL]
The installation of IDSP has been an adventure. After a few rough starts Autodesk support team got us through the installation of 2 computers. Now I am attempting to install IDSP on my computer and have run into a number of errors that between this forum and Autodesk support I have worked through.
I start the install once again and looked like everything was installing ok.
That is until I get an message "Allied product is not found" and the install fails and removes all installations up to this point. The failure happened while installing the Civil 3D Language Pack.
Install log states:
2013/6/24:15:51:11 Administrator ______ Allied product is not found2013/6/24:15:51:35 Administrator ______ Install Autodesk AutoCAD® Civil 3D® 2014 Language Pack Failed Installation aborted, Result=1603
I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process.
How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC.
View 1 Replies View RelatedI have a problem installing AutoCAD. When I run Setup.exe I see this error:
View 8 Replies View RelatedI did a couple of quick searches on this and didn't find anything that worked for me. I have a drawing done by another user and she used the archs.shx font. So I got a copy of this font off the Internet and installed it in my AutoCAD font file along side the dozens of other *.shx files which were located therein. But when I open up AutoCAD and try to choose this style it does not appear in the list.
View 6 Replies View RelatedI was asked at work if you can you install two versions of autocad (mech & elect etc) on the same PC and then select what version you want to run ?
View 4 Replies View RelatedI am new to API of Inventor. i tried installing DeveloperTools.msi loated at
C:UsersPublicDocumentsAutodeskInventor 2014SDK
It says "Could not find any version of microsoft visual studio."
However, I have Microsoft Visual Studio Express 2013 installed.
Also, is installing the SDK necessary to develop add-ins?
My client wants to buy Inventor 2013 and want to installed MDT 2009. How to install MDT 2009 of inventor 2013? He has a large data base of MDT. If he can not be installed MTD2009 he will not buy inventor 2013.
View 2 Replies View RelatedI am trying to get AutoCAD LT 2002 working in Windows 7. I did searching on these boards and from what I read the solution is to install the AutoCAD LT 2002 service pack (upgrading AutoCAD to verison 44) and then instal the gedit 3 compatibility patch (upgrading it from verison 44 to 47.
The problem I have is that when I run the service pack installation program (K030ltss1_K044_aclt_unl.exe) I get a message that my installation is already up to date. However when I check the version in autoCAd itself it says that it's still at version 30.
When I try to install on my new computer I just keep getting a dialogue box that says "You cannot install this product on the current operating system". I purchassed Autocad in about January 2011 and have a valid licence. The setup program gives me no other options. I just downloaded the program files rather than buy a hard copy.
View 8 Replies View RelatedI've successfully installed AutoCAD Architecture, and others, and was wondering if the files created directly in my C: drive under the folder 'Autodesk' can be deleted, (running short of disk space)?
They look to be, by their names, install files and I note what looks to be the actual applications, etc., are present in the Program folder, under another Autodesk folder, and Program (x86) for Design Review.
How does one determine if the version of AutoCAD that is installed ( 2012 mechanical in this case ) is an x32 or x64 bit installation. Normally I would just look to see if it was installed under Program Files or Program Files ( x86 ) but it is located on D: drive under another folder so I don't have that option.
View 1 Replies View Relatedon my initial start up, after installing the program, i've been getting this fatal error, "FATAL ERROR: Unhandled access violation reading 0x0000 exception at 92af22dh". I un-installed and re-installed and it still occurs. can't open the program. I'm using windows xp.
View 1 Replies View Relatedi want to set a TestStyle,so I can control the fontsize,fontname,etc.
View 4 Replies View RelatedI've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
Where to obtain a 32bit installer??? I have AutoCad 2012!
View 4 Replies View RelatedBefore I installed the Product Design Suite, Network License. I did a Clean Uninstall of all Autodesk software: Uninstalled Programs, Deleted remaining Autodesk Folders, Cleared the Registry of all things Autodesk, cleared the Windows Temp folder, and Even ran Windows Install Clean Up Program. Clean slate, start the install, type in my three redundant license server names, the suite installs without a hitch.
I reboot. I opened AutoCad Mechanical, and AutoCAd with not issues. However Inventor, Showcase, Sketchbook, 3ds Max, and Fusion will not load/open, all is the blue spinning wheel. Check the Task Manager and see the program in processes, nothing happens. Then I right click on the image, and I will get a window stating program not responding.
I checked my Environmental Variables and the ADSKFLEX_LICENSE_FLEX and FLEXLM_TIMEOUT are set correctly.
I do understand why my Autocad and Mechanical are the only software that functions out of the suite. I have done a complete uninstall and re-install and the issue still exists. Only AutoCAD will Open and function. Intentor will not open.
Machine description:
Dell Precision T3500
Intel Xeon W3530 @ 2.80 Ghz
12 gb RAM
ATI FirePro V5800
Win 7 Enterprise 64 bit