AutoCAD Civil 3D :: 2013 Install Breaks Custom Reports In 2011
Jul 5, 2012
We have 2011 installed have customized some of the .XSL reports in ProgramDataAutodeskC3D 2011enuDataReportsxsl
After installing 2013, the %ReportDir% variable for 2011 is pointing to the 2013 install, where the reports have NOT been customized. So when you run a report in 2011, it is using the XSL files in the 2013 location.
So the long and the short of it is the 2013 install broke our 2011 custom reporting ability.how to control the %ReportDir% variable in 2011?
[URL]
View 5 Replies
ADVERTISEMENT
Sep 6, 2012
Where can I find all the column types that are found in the different report types so I can use them in custom reports.
View 1 Replies
View Related
Apr 6, 2012
I tried creating a custom workspace and was able to do so (without any modifications) but when I was in that workspace, and loaded an old menu, it wiped out all the default workspaces. where / how these default workspaces are stored, or how to upload all my old menu stuff without going through a tedious cui mod?
View 3 Replies
View Related
Jul 14, 2012
I'm trying to see if I can write a rule that will link a custom property at the part level in a template and have it update when I copy the part and drawing to a new design. Below is the formula I'm using and it works in the original files but when I use Design Assistant to create a copy for a new design, this formula will not update.
iProperties.Value("Custom", "Title")=Parameter("Bearing_#01.ipt.Build_Title")
View 5 Replies
View Related
Mar 11, 2013
We've recently done some work for an engineering firm, and have also recently upgraded to Civil 2013.
It turns out they are using Civil 2011, and obviously are unable to open our drawing. As far as I'm aware, they need a TIN surface and cogo points, but I'm unsure of how to provide them with this other than reproccessing the job on an older version of Civil.
I'm thinking that I might be able to export to LandXML to keep all my points and surface, and then just export to Autocad 2010 for the linework?
View 3 Replies
View Related
Jan 21, 2013
I received a 2013 dwg file and want to convert it to 2011. I am currently running C3D 2011. I used the DWG TrueView program and was able to convert the 2013 file to 2011, but none of the alignments, profiles or corridors converted over. How to convert a 2013 file to 2011 and get the alignments, profiles, corridors, etc., to convert over as well?
View 3 Replies
View Related
Nov 1, 2012
See pic. Top pic is 2013 point cloud properties. bottom pic is 2011 point cloud properties. 2013 has a new 'point cloud adjust' option in properties.
Both drawings have same 'Lidar Classification' Style, but 2013 is all gray. I tried changing some fields inside the properties for 2013 under the point cloud adjust to no avail.
why this is like this and what I need to do to see the different colors for the different classifications.
View 9 Replies
View Related
Aug 21, 2013
I'm working as a contractor for a consulting firm and I'm inputting station points using alignments in to my c3d 2013 drawings.
The issue arises when people in the main office need to revise my drawings in their 2011 version of autocad and the station points come out as a surrounding the pline rectangle; a.k.a. crap-o-la.
I've tried saving the station points themselves (or the "alignment", that is) as a block and a wblock but when I input those in to their 2011 version the block comes in as an "OLE" and my lines are incased in a white rectangle and cannot be used further as part of the drawing.
Is there any other way to alignment make the transition from c3d to 2011 regular?
View 3 Replies
View Related
Apr 2, 2013
I get the following message when I try to access it from the menu.
"EditInSSA cannot be used because the optional feature is not installed on this machine"
When I look to modify a deployment I cannot find the option to add SSA.
View 4 Replies
View Related
Apr 3, 2012
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies
View Related
Nov 27, 2013
I was wondering how to combine common subassemblies so you don't have to seperately count them.
I realize the long way around this is avoiding subassemblies in general and linking a circuit drawing with a predefined additional MAN, CAT in the drawing of the subassemblie(s). This also allows me to annotate the subassembly Footprints. I havent seen an easy way of auto inserting subassemblies and linking common subitems to make a unique item number. The above is all I get when linking subassemblies through the databases (which also doesn't allow you to annotate/ insert the subassembly footprints). I must be missing a way to auto insert the subassembly Footprints . . . creating unique drawings with the subassembly Footprints is time consuming.
View 3 Replies
View Related
Apr 13, 2013
I'm trying to decide whether it is worth keeping up with the C3D releases every year. One thing I wanted to try was to see if 2014 worked any better on the key things I need, but I don't want to stuff up my 2013 installation. know if I can do a separate install safely?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
View 9 Replies
View Related
Apr 16, 2012
We're teaming up with an Architectual firm on a project. They use Revit 2013, we use Civil 3d 2011. They will have to save back for us. Will we be able to incorporate their dwg's into our dwg's and vice versa. If so, will the 2 be compatible with any issues?
View 2 Replies
View Related
Sep 24, 2013
I have an Excel file linked to a Table which has 3,400 lines. When the Table is unbroken a File Save takes 30 seconds. When the Table is broken it takes 30 Minutes to save. Makes the breaking feature for large table unusable.
View 3 Replies
View Related
Mar 22, 2013
Is there any option to customize the reports generated from Civil 3D 2011.
View 2 Replies
View Related
Dec 20, 2013
How to create custom reports or modify existing reports using VBA. NET or other tool.
View 4 Replies
View Related
Mar 15, 2013
Is there any way of printing Autocad reports using a different web browser than IE? My computer has lost the use of IE so I've loaded Firefox. I can no longer access any of the reports. I use the reports mostly for point print outs but I have used some of the others as well. I'm using C3D 2009.
View 5 Replies
View Related
Feb 8, 2013
Making my cut and fill reports more accurate?
The main question I have is when should I delete lines in my surface, so if there is literature on how to manipulate surfaces created from survey data that would be perfect.
View 8 Replies
View Related
Nov 28, 2011
When I try to install on my new computer I just keep getting a dialogue box that says "You cannot install this product on the current operating system". I purchassed Autocad in about January 2011 and have a valid licence. The setup program gives me no other options. I just downloaded the program files rather than buy a hard copy.
View 8 Replies
View Related
Jul 23, 2013
How to customize the reports that Civil 3d can generate to my firms needs. I have figured out how to change the appearance and precisions to the most of the numbers, but i still can not figure out a lot. Currently i am working on the output of the Parcel Map Check Report. If you look at the attachment i have an Image of what i have been asked to generate and an excel file of what i have been able to generate. I need to figure out how to remove the "," from the coordinates and how to rearrange/ change font of the way some things come out.
View 4 Replies
View Related
Sep 5, 2012
Using Report manager - Toolbox editor panorama I create a new parcel tool, in this case an xslt type, set up and can run it by right clicking the new tool while still in the panorama box. When I save it using the disk icon at the top of the page it does not show up in the Reports Manager toolbox. I refresh both boxes and still have a no show. Get out of the editor and still nada in the toolbox. I'm using C3D 2012 sp2 Win 7 64 bit. This report and setup acts correctly on a sister machine (32bit) C3D 2012 sp2 Win XP sp3.
View 1 Replies
View Related
Oct 8, 2012
I am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
View 3 Replies
View Related
Jul 2, 2012
How to replicate this? Add a vertical link to an assembly and have it target a profile for the elevation. In the section editor, check out the parameters of the link and see if it reports the correct elevation. Here's a video of what I did, how to do it in your own drawing: [URL]
Using C3D 2013 on Win 7 64.
View 2 Replies
View Related
Oct 31, 2013
i am very desappointed that it is not possible to install inventor suite 2011 on windows 8.1.
I have made the update of windows 8 and inventor does'nt not start, even with acomplet new install.
in my school, whe have inventor 2011 and the new students can't install inventor 2011 on their new pc.
the school don't change the version of inventor while the pc will not change (win xp and 32 bits, not good for inventor 2014).
View 5 Replies
View Related
Mar 12, 2012
I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".
Two issues: 1. it will not label a reverse curve properly....it shows them all as "compound curves". 2. A curve to curve is always shown as "NonTangent".
I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).
Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.
Curve to TangentReverseCurve
Curve to NonTangentReverseCurve
This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):
From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;
Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent
Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;
Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.
Civil 3D 2011
Windows 7 x64
View 3 Replies
View Related
Jun 3, 2013
is there maybe an error in the XSL?
Here is my alignment, correctly labelled in South Azimuth:
Before customising, the Alignment_Curve report gives me this:
View 2 Replies
View Related
May 2, 2012
It’s been drilled into me that we should keep Civil 3D Objects as separate as we can in the design process, thus minimizing data loss in case of corruption (or other some such disaster). So, our current workflow for our transportation projects is as follows:
Receive LandXML files of points, surface and existing CL alignment from surveyor.
Create a separate dwg for points which is then xref attached into our base model
Create dwg for EG surface, create dref
Create base model (existing conditions)
Create Roadway dwg, import LandXML of existing CL
Create design CL, dref
Create design profile, dref
Create Corridor dwg
[code]...
We are now being asked to produce slope staking reports, which require a “live” corridor and a SLG. Our current workflow doesn’t have both of these in the same drawing and since you can’t dref a corridor or a SLG, I'm forced to duplicate the SLG in the corridor dwg. Obviously copy/paste the SLG isn't an option either. I tried that, then exploding them down to polylines and creating a new SLG from the polylines, select them all, yeah, random creation.
Is the intended workflow to have the design corridor, SLG and all the section views in one drawing?
View 1 Replies
View Related
Feb 21, 2012
When I Create a Station offset to points report, the points are out of order and it does not display all of the points.
View 2 Replies
View Related
Jul 9, 2013
In Civil 3D 2013, in the Toolbox tab, I go to Report Manager, and select the Points_List, which then creates an HTML file.
I open it up in Chrome and when I print it, part of the point information at the bottom of Page 1 is cut off and shows up at the top of Page 2.
Is there a way to fix this?
View 2 Replies
View Related
Dec 5, 2012
I need to run two reports one for Cut and Fill, and one for Materials (shapes). I would like two material lists for the same alignment and sample line group.
The process, setup the materials list for Pave, Base, and Subbase. Generate report, delete list and setup for Cut and Fills, run the report. You do this over and over. Autodesk please add a way to save and import these setups, and a way to create multiple lists for each alignment and sample line group.
Note: Why the Civil 3d default for the interlude into the actual Compute Materials dialogue is Pave, Subbase, Base is beyond me, could someone tell the programmers that Subbase is generally below Base. Each time I have to delete the CIvil 3D defaults and redo this step.
View 1 Replies
View Related
Aug 28, 2012
i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies
View Related
