AutoCAD Civil 3D :: Reports Manager - Parcel Map Check
Jul 23, 2013
How to customize the reports that Civil 3d can generate to my firms needs. I have figured out how to change the appearance and precisions to the most of the numbers, but i still can not figure out a lot. Currently i am working on the output of the Parcel Map Check Report. If you look at the attachment i have an Image of what i have been asked to generate and an excel file of what i have been able to generate. I need to figure out how to remove the "," from the coordinates and how to rearrange/ change font of the way some things come out.
I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".
Two issues: 1. it will not label a reverse curve properly....it shows them all as "compound curves". 2. A curve to curve is always shown as "NonTangent".
I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).
Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.
Curve to TangentReverseCurve
Curve to NonTangentReverseCurve
This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):
From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;
Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent
Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;
Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.
Using Report manager - Toolbox editor panorama I create a new parcel tool, in this case an xslt type, set up and can run it by right clicking the new tool while still in the panorama box. When I save it using the disk icon at the top of the page it does not show up in the Reports Manager toolbox. I refresh both boxes and still have a no show. Get out of the editor and still nada in the toolbox. I'm using C3D 2012 sp2 Win 7 64 bit. This report and setup acts correctly on a sister machine (32bit) C3D 2012 sp2 Win XP sp3.
i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
I am wondering if there is a way to modify the Map Check Report to include Acreage Calculations like it used to. I am only given the square feet and need both. I know I can calculate it easily, but it would be nice if it were there by default.
Attached is a zip file with the source code I used to modify the Parcel Map Check Report, as discussed HERE. It is essentially the code as provided with C3D2009, modified to reduce the amount of paper required to print them out. There are some other optimizations (allow sorting by columns is one), but this was mostly done a few years ago and I do not recall everything I may have done. Projects included for C3D versions 2010-2012.
I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
Is there any way of printing Autocad reports using a different web browser than IE? My computer has lost the use of IE so I've loaded Firefox. I can no longer access any of the reports. I use the reports mostly for point print outs but I have used some of the others as well. I'm using C3D 2009.
The main question I have is when should I delete lines in my surface, so if there is literature on how to manipulate surfaces created from survey data that would be perfect.
I am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz 4.00 GB RAM Windows 7 Professional - 64-bit Nvidia Quadro 600 - 1GB DDR3
How to replicate this? Add a vertical link to an assembly and have it target a profile for the elevation. In the section editor, check out the parameters of the link and see if it reports the correct elevation. Here's a video of what I did, how to do it in your own drawing: [URL]
It’s been drilled into me that we should keep Civil 3D Objects as separate as we can in the design process, thus minimizing data loss in case of corruption (or other some such disaster). So, our current workflow for our transportation projects is as follows:
Receive LandXML files of points, surface and existing CL alignment from surveyor.
Create a separate dwg for points which is then xref attached into our base model Create dwg for EG surface, create dref Create base model (existing conditions) Create Roadway dwg, import LandXML of existing CL Create design CL, dref Create design profile, dref Create Corridor dwg [code]...
We are now being asked to produce slope staking reports, which require a “live” corridor and a SLG. Our current workflow doesn’t have both of these in the same drawing and since you can’t dref a corridor or a SLG, I'm forced to duplicate the SLG in the corridor dwg. Obviously copy/paste the SLG isn't an option either. I tried that, then exploding them down to polylines and creating a new SLG from the polylines, select them all, yeah, random creation.
Is the intended workflow to have the design corridor, SLG and all the section views in one drawing?
We have 2011 installed have customized some of the .XSL reports in ProgramDataAutodeskC3D 2011enuDataReportsxsl
After installing 2013, the %ReportDir% variable for 2011 is pointing to the 2013 install, where the reports have NOT been customized. So when you run a report in 2011, it is using the XSL files in the 2013 location.
So the long and the short of it is the 2013 install broke our 2011 custom reporting ability.how to control the %ReportDir% variable in 2011?
I need to run two reports one for Cut and Fill, and one for Materials (shapes). I would like two material lists for the same alignment and sample line group.
The process, setup the materials list for Pave, Base, and Subbase. Generate report, delete list and setup for Cut and Fills, run the report. You do this over and over. Autodesk please add a way to save and import these setups, and a way to create multiple lists for each alignment and sample line group.
Note: Why the Civil 3d default for the interlude into the actual Compute Materials dialogue is Pave, Subbase, Base is beyond me, could someone tell the programmers that Subbase is generally below Base. Each time I have to delete the CIvil 3D defaults and redo this step.
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1 Dell Precision T7400, Xeon CPU 3.16 GHz Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.
I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
I would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.
How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?
