Is there any way of printing Autocad reports using a different web browser than IE? My computer has lost the use of IE so I've loaded Firefox. I can no longer access any of the reports. I use the reports mostly for point print outs but I have used some of the others as well. I'm using C3D 2009.
View 5 RepliesIs there any option to customize the reports generated from Civil 3D 2011.
View 2 Replies View RelatedHow to create custom reports or modify existing reports using VBA. NET or other tool.
View 4 Replies View RelatedMaking my cut and fill reports more accurate?
The main question I have is when should I delete lines in my surface, so if there is literature on how to manipulate surfaces created from survey data that would be perfect.
Where can I find all the column types that are found in the different report types so I can use them in custom reports.
View 1 Replies View RelatedHow to customize the reports that Civil 3d can generate to my firms needs. I have figured out how to change the appearance and precisions to the most of the numbers, but i still can not figure out a lot. Currently i am working on the output of the Parcel Map Check Report. If you look at the attachment i have an Image of what i have been asked to generate and an excel file of what i have been able to generate. I need to figure out how to remove the "," from the coordinates and how to rearrange/ change font of the way some things come out.
View 4 Replies View RelatedUsing Report manager - Toolbox editor panorama I create a new parcel tool, in this case an xslt type, set up and can run it by right clicking the new tool while still in the panorama box. When I save it using the disk icon at the top of the page it does not show up in the Reports Manager toolbox. I refresh both boxes and still have a no show. Get out of the editor and still nada in the toolbox. I'm using C3D 2012 sp2 Win 7 64 bit. This report and setup acts correctly on a sister machine (32bit) C3D 2012 sp2 Win XP sp3.
View 1 Replies View RelatedI am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
How to replicate this? Add a vertical link to an assembly and have it target a profile for the elevation. In the section editor, check out the parameters of the link and see if it reports the correct elevation. Here's a video of what I did, how to do it in your own drawing: [URL]
Using C3D 2013 on Win 7 64.
I have edited the "GeneralLegalPhrasings.xml" file used for the parcel report "General_Legal_Description_for_Parcels".
Two issues: 1. it will not label a reverse curve properly....it shows them all as "compound curves". 2. A curve to curve is always shown as "NonTangent".
I've attached the .xml file (I only edited the imperial parcels - the second large group of <Metes>).
Quite simply, these two "types" below have the words "reverse curve" and tangent or non-tangent accordingly in the output phrase, but it only creates non-tangent compound reports.
Curve to TangentReverseCurve
Curve to NonTangentReverseCurve
This is the report from the parcel in the attached dwg file (notice the "curve to the left" -> "curve to the right" labelled as compound, and all non-tangent curve to curve):
From the POINT OF BEGINNING; Thence, North 90° 00' 00" West, 129.16 feet to a point for corner;
Thence, North 00° 00' 00" East, 100.00 feet to a point for corner, the beginning of a curve; tangent
Thence, 61.46 feet along the arc of a ____ curve to the right, having a radius of 39.13 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 55.34 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 47.09 feet along the arc of a ____ curve to the left, having a radius of 29.98 feet, a central angle of 90° 00' 00", and a chord which bears North 45° 00' 00" East, 42.40 feet, to a point for corner, the beginning of a compound curve; non-tangent
Thence, 94.33 feet along the arc of a ____ curve to the right, having a radius of 30.03 feet, a central angle of 180° 00' 00", and a chord which bears North 90° 00' 00" East, 60.05 feet, to a point for corner;
Thence South 00° 00' 00" West, 169.11 feet to the POINT OF BEGINNING and containing 0.483 acres of land.
Civil 3D 2011
Windows 7 x64
is there maybe an error in the XSL?
Here is my alignment, correctly labelled in South Azimuth:
Before customising, the Alignment_Curve report gives me this:
It’s been drilled into me that we should keep Civil 3D Objects as separate as we can in the design process, thus minimizing data loss in case of corruption (or other some such disaster). So, our current workflow for our transportation projects is as follows:
Receive LandXML files of points, surface and existing CL alignment from surveyor.
Create a separate dwg for points which is then xref attached into our base model
Create dwg for EG surface, create dref
Create base model (existing conditions)
Create Roadway dwg, import LandXML of existing CL
Create design CL, dref
Create design profile, dref
Create Corridor dwg
[code]...
We are now being asked to produce slope staking reports, which require a “live” corridor and a SLG. Our current workflow doesn’t have both of these in the same drawing and since you can’t dref a corridor or a SLG, I'm forced to duplicate the SLG in the corridor dwg. Obviously copy/paste the SLG isn't an option either. I tried that, then exploding them down to polylines and creating a new SLG from the polylines, select them all, yeah, random creation.
Is the intended workflow to have the design corridor, SLG and all the section views in one drawing?
When I Create a Station offset to points report, the points are out of order and it does not display all of the points.
View 2 Replies View RelatedWe have 2011 installed have customized some of the .XSL reports in ProgramDataAutodeskC3D 2011enuDataReportsxsl
After installing 2013, the %ReportDir% variable for 2011 is pointing to the 2013 install, where the reports have NOT been customized. So when you run a report in 2011, it is using the XSL files in the 2013 location.
So the long and the short of it is the 2013 install broke our 2011 custom reporting ability.how to control the %ReportDir% variable in 2011?
[URL]
I need to run two reports one for Cut and Fill, and one for Materials (shapes). I would like two material lists for the same alignment and sample line group.
The process, setup the materials list for Pave, Base, and Subbase. Generate report, delete list and setup for Cut and Fills, run the report. You do this over and over. Autodesk please add a way to save and import these setups, and a way to create multiple lists for each alignment and sample line group.
Note: Why the Civil 3d default for the interlude into the actual Compute Materials dialogue is Pave, Subbase, Base is beyond me, could someone tell the programmers that Subbase is generally below Base. Each time I have to delete the CIvil 3D defaults and redo this step.
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedI am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
I would like to know if there is a way to produce a report, or an Excel or text file in order to list and sort all the construction files by the levels or divisions they are in (i.e. to retrieve information from the corresponding project navigator xml files).
View 1 Replies View Relatedhow to add custom browser views to the project browser window. See the attached image
View 1 Replies View RelatedI can't find the preferences for changing the default browser than opens when previewing an animation.
View 2 Replies View Relatedhow to connect the Inventor db to PHC db ?
Its an SQL Crystal db on manufactor... but I dont know what is of the inventor...
I was wondering how to combine common subassemblies so you don't have to seperately count them.
I realize the long way around this is avoiding subassemblies in general and linking a circuit drawing with a predefined additional MAN, CAT in the drawing of the subassemblie(s). This also allows me to annotate the subassembly Footprints. I havent seen an easy way of auto inserting subassemblies and linking common subitems to make a unique item number. The above is all I get when linking subassemblies through the databases (which also doesn't allow you to annotate/ insert the subassembly footprints). I must be missing a way to auto insert the subassembly Footprints . . . creating unique drawings with the subassembly Footprints is time consuming.
I'm having big issues trying to get a .SID picture to plot. The .SID shows up in the print preview page, but then never makes it to the plotter.
View 6 Replies View RelatedWhen I quit CS6, it seems to think that it crashed and I get an error message. What could be causing this? I'm on an i Mac in OSX 10.6.
View 5 Replies View RelatedI have an issue where we print a set of drawings from SSM and a couple of the drawings (not the complete set) had detail call outs with hashtags where the field didn't update.
This is with the FIELDEVAL setting for these drawings at 31. You can open that drawing and print it and the callouts populate fine. I had another user in the same office try and print the drawings 2 weeks later and the callouts populated.
I tried right after that (I am in a different office 45 miles away) and the callouts didn't populate. I"m thinking this has got to be some type of network latency issue because it's very sporadic.
I recently had to re-format my hard drive and lost the print driver that communicates with the Kip Plotter that I have and Autocad civil 3d 2011. I am needing the Kip10.hif print driver but cannot find it anywhere on the web that I have looked, where I can download this driver, I have the disk for the Plotter but if only includes the drivers for civil 3d 2009.
View 1 Replies View RelatedWe recently upgraded to Civil 3d 2014 and have had a strange box show up after printing to PDF. We use Acroplot to print to PDF. Please see attachment. It has only happened to 3 users so far and one user's system stopped doing it.
Also experience a slow open and processing initially when you made the switch to 2014 (we upgraded from 2011 c3d). We suspect it may be a conversion of files causing this. Many of the xrefs or DS have not been saved in 2014.
I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.
Here is how it is setup and what I have tried
The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.
The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.
The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch
Lines merge is on and needs to be on.
I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.
I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.
I realize my PS cs3 is outdated and I only have a G5 power pc tiger - but my PS worked beautifully until around the time I loaded in an Epson NX625 and its extras.
Now PS keeps crashing at startup. Only PS; my Bridge and others don't.
Here is the crash report.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE AdobeCrashReport SYSTEM "AdobeCrashReporter.dtd">
<crashreport version="1.1" crVersion="2.5.0.02272007" applicationName="Photoshop" applicationVersion="10.0.1" build="10.0.1 (10.0.1x20071012 [20071012.r.1644 2007/10/12:09:30:00 cutoff; r branch]), ©1990-2007 Adobe Systems Incorporated">
<time year="2012" month="2" day="16" hour="14" minute="30" second="5" />
<user guid="6E5715C8-98DB-41C2-BF0F-BFBD47E935B0" />
[code]....
I have totally uninstalled and reinstalled. I removed all and any related folders that didn't get removed on the uninstall. It still keeps crashing on startup. The opening box comes up starts going through its stuff and then shuts down and a crash report gets generated. It is the same report each time.
Today I use a dvd maker freeware program...load this mpg file and it creates the dvd folder and I create the image from that. Total size is 4.2 and it reports using 94% of the dvd available space. Freeware program puts in extra screens advertisements so can't use it.
I attempt to use the share-create disc and import same mpg file and it reports in the bar that its 6.48GB. To me this is a problem and I can't understand why it reports it as 2.2GB larger than the actual file size. There is no menu its from a new project, nothing imported to the timeline, just open, create, import and my OS and every other program must be reporting it wrong.