AutoCAD Civil 3D :: Printing With Kip 3000 Series?

Jun 18, 2012

I recently had to re-format my hard drive and lost the print driver that communicates with the Kip Plotter that I have and Autocad civil 3d 2011. I am needing the Kip10.hif print driver but cannot find it anywhere on the web that I have looked, where I can download this driver, I have the disk for the Plotter but if only includes the drivers for civil 3d 2009.

View 1 Replies


CorelDRAW Graphics Suite X6 :: Printing Color With HP Photosmart 8200 Series?

Jan 22, 2013

I'm having problems with printing documents in color using the Corel Draw X6 (Windows 7). My printer is an HP Photosmart 8200 Series and I'm using the most recent driver from HP. I've made sure that the color is turned on (i.e. grayscale is turned off).

When I go the print dialog and the preview I only see black and white (and get no colors when proceeding with printing). For some strange reason I don't get a 'color' tab in the print dialog (where I could check whether grayscale/black&white printing is turned on).

But when I use a different printer driver (e.g. Windows XPS) then suddenly I see the correct preview with color. So somehow this is linked to the HP printer driver.

View 2 Replies View Related

Photoshop Elements :: Document 60cm X 23cm - Printing In Series To Paste Afterwards

Aug 18, 2013

I am trying to print a doc 60cm x 23cm but my printer will only accept A4 paper.  I am happy to have this printed over a few sheets but even using the custom print options for paper and print sizes I am only able to print one section of the picture. How I can print a series from the picture so I can paste up afterwards?

View 1 Replies View Related

AutoCAD Civil 3D :: Create A Profile From A Series Of Points

Dec 15, 2013

I have collected points across a 500m distance with easting, northing and height values. This line of points is measuring a stepped slope of a field.

I want, if possible, to create a profile (something that looks like a slice of the slope, so that the steps and profile of the slope is clear.

Can this be achieved? Will you be able to guide me through the process?

View 6 Replies View Related

AutoCAD Civil 3D :: Extrude Preview (Series Of 3D Faces)

May 6, 2013

I'm trying to extrude a series of 3D faces, a very large series, over 200,000 3D faces. I´ve done this before only it was not on so many faces as I can select only like 3,000 faces aprox at any one time or the computer crashes.

I think this problem could be solved, or at least I could save some time, if the extruding preview could be turned off. By extruding preview I mean that when I enter the extrude command and select the objects to extrude, then immediatly there's a preview of what the objects would look like once they're extruded and that's what's causing the delay and the crashes.

Is there any way this could be turned off?

I've attached an image.

View 5 Replies View Related

AutoCAD Civil 3D :: Recreate Long Series Of Curves From Arc Specs

May 8, 2013

I have a copy of an old plan showing curved boundaries which I wish to recreate in C3D. There's lots of connecting arcs, all of which are annotated like:

RAD 15
CHORD 21.213
ARC 23.56
T.L. 15

I can see that the first line is the radius, the 2nd and 3rd lines are the length and orientation of the arc chord, the 4th line is the arc length. I've been able to get a correct result by firstly drawing the chords, then adding arcs with the appropriate radii between the two ends of each chord. However, I'm sure there's a quicker and easier way. Sometimes the arcs are separated by short sections of straight line which have length and bearing details as well. 

Attached is a screen shot of a short length.

View 3 Replies View Related

AutoCAD Civil 3D :: Connect The Lowest Points Of Series Of Cross Sections?

May 15, 2013

is there a way to connect the lowest points of each cross section, for a series of cross sections, and possibly make a pline or feature line in plan view?

Civil 3D 2013 SP1, Win 7-64 bit

View 9 Replies View Related

Photoshop :: 3D Feature In CS6 - Intel HD 3000 Graphics

Jul 9, 2012

I'm just wondering if it is normal I don't have the 3D feature in Photoshop CS6. I had it installed in my old laptop (an old one with a AMD Vision processor) and the 3D option was available, but after I moved all my old programs to my new one (a Windows 7, 64 bits, Intel Core i5, Intel HD 3000 Graphics video card) this option is not available. I dunno if it's due to the fact that OpenCL is not available in my laptop or if it's anything else.

View 21 Replies View Related

Photoshop :: Tiling 3000 Individual Images

Mar 28, 2009

I have 3020 (three thousand and twenty) individual .jpg files that are 72x90 pixels each, and the images have borders. I would like to make this lot of images arranged into a hi-res wallpaper (my current resolution is 1680x1050, but I would like it a little larger for possible future larger resolutions), without gaps, placed starting horizontally in alphabetical order.

This might seem like an odd request, but I'm stumped on how to do it. I wouldn't mind if someone did this arrangement for me, but I would also like to know how to perform it myself, as I would like to do it again in the near future.

I have CS3.

View 1 Replies View Related

Photoshop Elements :: Copying Album (3000 Photos) To Another Computer?

Oct 6, 2013

I have Elements 10 on both my Dell Laptop and also on a HP PC.  I want to copy an album that I created on the Laptop (3000 photos) onto the PC.  When I try to export the Album to either the Laptop hard drive or DVD it fails and Elements shuts down.  I don't want to do it via a backup as there are many photos I do not want to copy.  How do I isolate the Album alone.

View 2 Replies View Related

Lightroom :: Folders With Subfolders And More Than 3000 Pictures Cannot Be Displayed In Library Mode

Mar 12, 2012

I use a file structure in lightroom with subfolders within folders to organize photos; some of these top level folders contain many thousands of pictures; I have found that any top level folder with greater than 3000 photos will no open, and therefore all photos within that top level folder are not searchable. When I try opening such a large folder, the phrase "no photos in selected folder" is displayed. This has never been happened in LR3, but is happening in LR4.  Folders less than abour 2500 photos can be opened and searched easily.

View 2 Replies View Related

AutoCAD Civil 3D :: SID Not Printing As Background?

May 7, 2013

I'm having big issues trying to get a .SID picture to plot.  The .SID shows up in the print preview page, but then never makes it to the plotter.

View 6 Replies View Related

AutoCAD Civil 3D :: Printing & Network Latency

Oct 28, 2013

I have an issue where we print a set of drawings from SSM and a couple of the drawings (not the complete set) had detail call outs with hashtags where the field didn't update.

This is with the FIELDEVAL setting for these drawings at 31. You can open that drawing and print it and the callouts populate fine. I had another user in the same office try and print the drawings 2 weeks later and the callouts populated.

I tried right after that (I am in a different office 45 miles away) and the callouts didn't populate. I"m thinking this has got to be some type of network latency issue because it's very sporadic.

View 1 Replies View Related

AutoCAD Civil 3D :: Printing Reports Using Different Web Browser Than IE?

Mar 15, 2013

Is there any way of printing Autocad reports using a different web browser than IE?  My computer has lost the use of IE so I've loaded Firefox.  I can no longer access any of the reports.  I use the reports mostly for point print outs but I have used some of the others as well. I'm using C3D 2009. 

View 5 Replies View Related

AutoCAD Civil 3D :: Dialogue Box Appears After Printing To PDF

Aug 12, 2013

We recently upgraded to Civil 3d 2014 and have had a strange box show up after printing to PDF.  We use Acroplot to print to PDF.  Please see attachment.  It has only happened to 3 users so far and one user's system stopped doing it. 

Also experience a slow open and processing initially when you made the switch to 2014 (we upgraded from 2011 c3d).  We suspect it may be a conversion of files causing this.  Many of the xrefs or DS have not been saved in 2014. 

View 4 Replies View Related

AutoCAD Civil 3D :: Lines Not Printing Behind Screen

Jan 17, 2013

I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.

Here is how it is setup and what I have tried

The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.

The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.

The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch

Lines merge is on and needs to be on.

I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.

I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.

View 5 Replies View Related

AutoCAD Civil 3D :: Printing Drawing On A4 Paper Size

Jun 25, 2013

How can  i print my drawing (1400 * 250)m on several A4 paper size,I'm using C3d 2012.

View 3 Replies View Related

AutoCAD Civil 3D :: Crashes When Printing PDF From Sheet Manager?

May 6, 2013

Autocad crashes when printing PDF from sheet manager

Project plotted fine before

View 3 Replies View Related

AutoCAD Civil 3D :: Printing Hypsometry - Surface Not Appearing

Jul 21, 2012

I'm trying to print the hypsometry but when I do it, the surface doesn't appear. The problem is the same with other types of elevations.

I checked the layers properties, but it doesn't seem to be the problem as all the layers are printables.

I can print the hypsometry in the model space.

View 5 Replies View Related

AutoCAD Civil 3D :: Slope Hatching Not Visible When Printing To PDF

Jul 3, 2012

I am using AutoCAD Civil 3D 2012 and Adobe X Pro.  When I print to PDF (using plotter DWG to PDF) the hatching for the slopes analysis does not show up.  I have other hatching in the plan and that shows up, along with the outline for the slopes.  Its just the actually slope hatching that doesn't show up. 

View 2 Replies View Related

AutoCAD Civil 3D :: Printing Point List With Page Breaks

Jul 9, 2013

In Civil 3D 2013, in the Toolbox tab, I go to Report Manager, and select the Points_List, which then creates an HTML file.

I open it up in Chrome and when I print it, part of the point information at the bottom of Page 1 is cut off and shows up at the top of Page 2.

Is there a way to fix this?

View 2 Replies View Related

AutoCAD Inventor :: Creating Series Of Connectors

Oct 24, 2013

I want to build a connector library in Inventor. So I choose to start with the 8STA motorsport connectors.

I build the connector based on parameters and created an iPart. So far so good.

View 4 Replies View Related

AutoCAD Map 3D :: How To Import Geotiffs And Series Of Points

Sep 26, 2011

New user of autocad map 3d. My company has tasked me with figuring out how to plot updates (new and modified cell towers) that come to us as lat/long coordinates on a aeronautical sectional map from the FAA's website.

The sectional maps come to us as GeoTiffs at 1:500,000 scale.  We could plot these out by hand but I am trying to make the process a lot faster by using Map3d. My questions are:

1- How do i import the geotiffs keeping the right scale, projection, etc.

2-How do i insert a series of points at the same time

3- Can i output the file as a tiff when im done?

View 6 Replies View Related

AutoCad 2D :: How To Select All Entities On A Series Of Layers

Oct 10, 2012

I need a function similar to Qselect.

In this case I would like to select all entities on a series of layers. (i.e.: a-site-* or a-fill*). I know I can do this with qselect by doing each layer one at a time and append the existing selection set.

Instead, I've been locking all layers except the series I'm looking for, but it seems like there should be a quicker way.

View 9 Replies View Related

AutoCAD Civil 3D :: Export LandXML Error - Printing Point List

Sep 28, 2012

Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:

Export LandXML is currently is currently not supporting the following drawing units:

Millimeters, Centimeters, Decimeters, Inches.

I have used the unit command to make sure I am in feet.  Niot sure what else to look at.

View 1 Replies View Related

AutoCAD Civil 3D :: Inserted Alignment Line Table - Printing Too Small

Mar 21, 2013

Inserted an alignment line table. It's in model space and viewported (locked) to the layout. On the screen it looks fine but during print preview and printing it comes out too small. Can this be controlled?

View 8 Replies View Related

Photoshop :: Photoshop And 3000+ Fonts

Sep 25, 2007

I like having huge numbers of fonts so I can spend 3 hours wondering which one suits the best but since I implemented them to Windows fonts my PS loads about 4 mins and likes to start loading something more even while I'm working on sth. Is there any way to make PS not to load all of these fonts during startup but when I load fonts selection window or something around that?

View 4 Replies View Related

AutoCAD Civil 3D :: PDF File Size Is Large When Printing Drawing With Rotated Views?

May 15, 2012

I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?

View 4 Replies View Related

AutoCAD Inventor :: Any Sort Of Live Update Tool That Comes With 10 Series?

Jun 25, 2006

Is there any sort of "Live Update" tool that Comes w/ Inventor 10 series? I have been to the "downloads" page at Autodesk site for Inventor 10, and have already installed sp3a, and a couple of the hotfixes (1054780 & 1057155) - I was trying to follow the dates and hotfix numbers in an effort to bring my product completely up to date, but now Inventor does not seem to be working correctly - I suspect that I did something in the wrong order. How can I know that my product is completely up-to-date, and is it possible to get a sequential list of SP's and Hotfixes so I know what order I'm supposed to install? I have also tried "repair" from the installation disk, but after "gathering all required information", nothing happens.

View 3 Replies View Related

AutoCAD 2010 :: Make Any Number / Letters Or Series Of Both Or Each As Subscripts?

May 29, 2012

Is there a way to make any number,letters, or a series of both or each as subscripts?

View 2 Replies View Related

AutoCad 3D :: Applying Surface / Turning Series Of Curves Into Solid Object

Mar 23, 2012

I am currently working on a project that involves some basic collision simulation of an LNG ship in Solidworks. However, before I can do that I need to turn the ship (which at the moment exists as a series of curves, see attachment!) into a solid object, which I can then export as an IGES file.

So far I have tried the PRESSPULL command and it hasn't worked at all, only produced a "not responding message".

View 3 Replies View Related

Copyrights 2005-15, All rights reserved