AutoCAD Civil 3D :: Modified Parcel Map Check Report Source Code
Jun 14, 2012
Attached is a zip file with the source code I used to modify the Parcel Map Check Report, as discussed HERE. It is essentially the code as provided with C3D2009, modified to reduce the amount of paper required to print them out. There are some other optimizations (allow sorting by columns is one), but this was mostly done a few years ago and I do not recall everything I may have done. Projects included for C3D versions 2010-2012.
View 1 Replies
ADVERTISEMENT
Jun 21, 2012
i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies
View Related
Jan 2, 2014
I am wondering if there is a way to modify the Map Check Report to include Acreage Calculations like it used to. I am only given the square feet and need both. I know I can calculate it easily, but it would be nice if it were there by default.
View 5 Replies
View Related
Oct 24, 2012
I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies
View Related
Mar 8, 2012
I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
View 3 Replies
View Related
Jul 23, 2013
How to customize the reports that Civil 3d can generate to my firms needs. I have figured out how to change the appearance and precisions to the most of the numbers, but i still can not figure out a lot. Currently i am working on the output of the Parcel Map Check Report. If you look at the attachment i have an Image of what i have been asked to generate and an excel file of what i have been able to generate. I need to figure out how to remove the "," from the coordinates and how to rearrange/ change font of the way some things come out.
View 4 Replies
View Related
Jun 13, 2012
I am trying to run a parcel area report generator, and I get the above error message, along with the path xslParcel_Area.xsl and an advisory to reinstall the program.
I think it is pointing to the full path location of C:ProgramDataAutodeskC3D 2012enuDataReportsxsl.
The file (Parcel_Areas.xsl) exists in this location.
NONE of the parcel reports that I tried to execute work - they all return the same grammtically painful error message.
View 8 Replies
View Related
Apr 3, 2013
When opening a parcel (xml) report created from AutoCAD Civil3D 2012, Internet Explorer 10 displays message stating "internet explorer restricted this webpage from running scripts or activex controls."
In Internet Explorer 9, we would previously just click "allow blocked content" and the General Legal Description dialogue box would work correctly, collapse, expand, show information when buttons are clicked, etc. The attached file does function properly with IE9, but not IE10.
After upgrading to IE10, the General Legal Description Dialogue box will not collapse, expand, the dropdown buttons will not function properly, and information is not displayed correctly after clicking "allow blocked content"
I am assuming there is a new security feature in IE10 that will not allow the script/activex control to function properly in the .html file that was created. I have reduced Security levels in IE10, and also changed settings under Tools > internet options > advanced > checked boxes: "allow active content from CDs to run on My Computer," "Allow active content to run in files on My Computer," and "Allow software to run or install even if the signature is invalid." and restarted computer. This did not change the issue as stated above. I have also opened the html file in IE 10 64-bit and firefox, and still get the same results.
Attached is the file I am troubleshooting with. I have changed the file extension to .txt. If you download the file, just change it back to .html extension.
Internet Explorer 10
Civil2D 2012 x64
Windows 7 Professional
HP Z200 workstation
View 1 Replies
View Related
Oct 31, 2009
When I run the Map Check report in C3D 2010, the Delta angle on curves displays to a tenth of a second, no matter what I do with settings. It should display to the whole second.
View 4 Replies
View Related
Aug 26, 2013
I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies
View Related
Oct 17, 2012
When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
View 4 Replies
View Related
Jul 6, 2012
How can i interact with the source code of LOFT command.Especially, I'd like to inform me, about the method that Loft commad uses in order to draw a solid. I suppose that the two sketches I want to intersect, are close enough, thus the programm, can't generate the geometry...
View 2 Replies
View Related
Feb 15, 2013
At my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.
Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.
I just need some code that will get the file name of the part displayed in the drawing. Note that we use iparts so the code must get the member file name and not the factory file name.
Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDrawingDoc.ActiveSheet
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 8 Replies
View Related
May 28, 2011
Is it possible to have a look at the sourcecode oft Paint? I am having trouble with a Nikon Coolscan IV Scanner. I am using at the moment twaindotnet. Do you have a better library?
View 3 Replies
View Related
Apr 1, 2011
Is website creator allow to view and edit html source code? WYSIWYG?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 3 Replies
View Related
Nov 29, 2013
In my plug-in I have some datagridview to show alignment data of all alignments in drawing.
I have a button called (regen) to update data in these datagridviews. I read again database drawing and re-source again datagridview. (method "upload_all")
I have read some posts and blogs about this: [URL] ....
and about overrule: [URL] ....
But I don´t understand almost.
I only want to execute method "upload_all" if some alignment is modified in the drawing.
Also, I would like to do it if some alignment is just created or deleted.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 1 Replies
View Related
Mar 12, 2013
I created an alignment in one file. Then in another file I data shortcut that alignment in. From there I created an existing ground profile using that alignment. Later I modified the alignment. When I go into my profile drawing containing the existing ground profile, it did not update. I have had this happen on several projects and I can not figure out why it is not updating. My station range on the existing ground profile is set to automatic.
I used to do this all the time in 2012 and never had this problem. I am using 2013 with the latest update..
View 6 Replies
View Related
Apr 4, 2013
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 7 Replies
View Related
Apr 27, 2012
I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
View 6 Replies
View Related
Oct 21, 2013
I am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
View 2 Replies
View Related
Oct 30, 2013
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies
View Related
Aug 21, 2013
2014 (COM Preferred)
Are Parcel center points available in the API?
The origin of the Area Label would be ideal.
View 8 Replies
View Related
Jan 7, 2014
What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
View 9 Replies
View Related
Aug 21, 2012
I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.
[URL]
View 1 Replies
View Related
Aug 7, 2011
Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies
View Related
Jul 16, 2008
I have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
View 8 Replies
View Related
Mar 8, 2012
I would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.
How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?
C3D 2011 32bit
Win XP SP3
View 5 Replies
View Related
Oct 4, 2013
C3D 2013 managed dot net..I was hoping to find ParcelLoops as a member of Parcel. But its not. used AECC_PARCEL as dxf selection filter then passed to object type; Autodesk.Civil.DatabaseServices.Parcel
I need to access the parcel boundary segments .. have I used the incorrect object?
View 4 Replies
View Related
Aug 7, 2012
I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.
I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.
Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.
So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?
View 1 Replies
View Related
Sep 4, 2012
Is there anyway to create parcel labels (or any other kind of C3D label) that are NOT annotative?
C3D v.2012
View 7 Replies
View Related
Mar 11, 2013
just a general question regarding contour labelling. Does it refresh automatically after I modified the labelling setting? My experience is no. Here is what I did, given an existing surface. Go to Surfaces -> Add Surface Labels -> Contour-Multiple at Intervals, I gave a decent interval, labels the entire surface with a few runs. Later on I decided to say hide the contour label lines, so I would go to Settings ->right click on Surface->Contour Labelling Defaults->set Display Contour Label Line to False, click Apply. So this setting will affect all the contour labelling created thereafter, but does it change the contour labels that I already created? If not, how can I change those labels?
View 3 Replies
View Related
