I am wondering if there is a way to modify the Map Check Report to include Acreage Calculations like it used to. I am only given the square feet and need both. I know I can calculate it easily, but it would be nice if it were there by default.
View 5 Repliesi am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View RelatedAttached is a zip file with the source code I used to modify the Parcel Map Check Report, as discussed HERE. It is essentially the code as provided with C3D2009, modified to reduce the amount of paper required to print them out. There are some other optimizations (allow sorting by columns is one), but this was mostly done a few years ago and I do not recall everything I may have done. Projects included for C3D versions 2010-2012.
View 1 Replies View RelatedI copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedI'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
How to customize the reports that Civil 3d can generate to my firms needs. I have figured out how to change the appearance and precisions to the most of the numbers, but i still can not figure out a lot. Currently i am working on the output of the Parcel Map Check Report. If you look at the attachment i have an Image of what i have been asked to generate and an excel file of what i have been able to generate. I need to figure out how to remove the "," from the coordinates and how to rearrange/ change font of the way some things come out.
View 4 Replies View RelatedI am trying to run a parcel area report generator, and I get the above error message, along with the path xslParcel_Area.xsl and an advisory to reinstall the program.
I think it is pointing to the full path location of C:ProgramDataAutodeskC3D 2012enuDataReportsxsl.
The file (Parcel_Areas.xsl) exists in this location.
NONE of the parcel reports that I tried to execute work - they all return the same grammtically painful error message.
When opening a parcel (xml) report created from AutoCAD Civil3D 2012, Internet Explorer 10 displays message stating "internet explorer restricted this webpage from running scripts or activex controls."
In Internet Explorer 9, we would previously just click "allow blocked content" and the General Legal Description dialogue box would work correctly, collapse, expand, show information when buttons are clicked, etc. The attached file does function properly with IE9, but not IE10.
After upgrading to IE10, the General Legal Description Dialogue box will not collapse, expand, the dropdown buttons will not function properly, and information is not displayed correctly after clicking "allow blocked content"
I am assuming there is a new security feature in IE10 that will not allow the script/activex control to function properly in the .html file that was created. I have reduced Security levels in IE10, and also changed settings under Tools > internet options > advanced > checked boxes: "allow active content from CDs to run on My Computer," "Allow active content to run in files on My Computer," and "Allow software to run or install even if the signature is invalid." and restarted computer. This did not change the issue as stated above. I have also opened the html file in IE 10 64-bit and firefox, and still get the same results.
Attached is the file I am troubleshooting with. I have changed the file extension to .txt. If you download the file, just change it back to .html extension.
Internet Explorer 10
Civil2D 2012 x64
Windows 7 Professional
HP Z200 workstation
When I run the Map Check report in C3D 2010, the Delta angle on curves displays to a tenth of a second, no matter what I do with settings. It should display to the whole second.
View 4 Replies View RelatedI have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies View RelatedWhen creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
Is it possible to insert a formula or is there an existing expression I could use to calculate area in acres from a General Overall Length line label if I input the width?
View 5 Replies View RelatedIf I draw a line and label it I get the correct bearing and distance. If I list the line it gives me a different bearing. how can I correct this?
View 1 Replies View RelatedIs there a way to count all types of object in a drawing?
Like this:
Command: ????
Number of blocks: 22
Number of 3d faces: 2
.
.
Number of hatches:1
"Qselect" does it but it can be very slow if there are a large number of objects in the file.
I guess this information is savea as "meta data" and can be accessed even without opening the file???
Is there a way to re-order the point file format listing for points on the settings tab? I have tried everything and it will not change the order of the listing.
View 3 Replies View RelatedOn a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
View 6 Replies View RelatedI am new to C3D and I have been going through all of the tutorials and learning everything I can from the given data, which has been amazingly useful. Everything has been running spot on except today when I was going throughtthe parcels tutorial, I applied Parcel Number and Area to a group of parcels I created via the tutorial dwg file "Parcle-1A". Everything displays correctly except the Area is not shown as it does in the sample pic. I have applied the "Parcel Number And Area" to the Area Label Style, but it still does not display the area. Only the Parcel Number. Is there some part of this process that I am overlooking? The tutorial dwg file is called "Parcel-1A". It was too large to attach, but you can find all of the tutorial dwg files via the Help Menu. It depends on your OS to where they are located.
If you go under Parcels Tutorial>Exercise 1: Creating Parcels from AutoCAD Objects, you can see exactly what I am working with.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
I have a drawing with two parcel tables in it. I would like the header on one to be Line Table 1 and the other Line Table 2, is this possible? When I change the text in the style, the header in both change.
View 2 Replies View Related2014 (COM Preferred)
Are Parcel center points available in the API?
The origin of the Area Label would be ideal.
What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
I am trying to set the value of the exisitng userdefined property "Address" of Parcels using the com method SetUserDefinedPropertyValue but have had not luck. I have looked at the following help sections but that has not worked.
[URL]
Is there a way to make the parcel ROW as my target with for my corridor?
View 2 Replies View RelatedI have parcel segments with a PL linetype. One of the segments came in upside down. Is there a way to flip this line without actually manually pulling the pickbox's?
View 8 Replies View RelatedI would like to have my parcels be able to label the lots with sometihng other than the Lot # given by the setup of the parcel itself. What i'd like to be able to do is have it label Outlot A - which I haven't been able to figure out to date.
How can I get the parcel style to use something other than the word Lot or a number (given the typical lot is a number). We have various reasons why Outlot A is a needed label. How does one go about getting C3D to use something other than the name template in parcel style. I can toggle the name template option off once I create the parcel. But, when I toggle it off - then go to the name and change it to Outlot A - the parcel label still shows as Lot 1. Why?
C3D 2011 32bit
Win XP SP3
C3D 2013 managed dot net..I was hoping to find ParcelLoops as a member of Parcel. But its not. used AECC_PARCEL as dxf selection filter then passed to object type; Autodesk.Civil.DatabaseServices.Parcel
I need to access the parcel boundary segments .. have I used the incorrect object?
I don't have much experience with parcels. We don't subdivide property. But I have to do some Acquisition maps and this is the first time I've had an opportunity to do them in Civil 3D.
I wont get in to the gory detail, but I created some parcels that were very slightly off for rotation. It turned out there were some distance problems too. I thought I would just rotate the parcel based on a couple of known corners and then snap to corners I had from a drawing in the correct system.
Mostly that worked. But now I have a curve that isn't tangent because the far end of one of the tangents was adjusted. Also, somehow, the radius is off. I'm only talking about a couple of thousands of a foot, but I'd like to make it right since it has to be edited anyway. I've tried the parcel editing tools from the ribbon and read some of the sections in help that I thought might apply. I haven't been able to adjust the curve.
So now after all the warm-up, my questions. Can I just erase that curve and use the parcel creation tools to add a new curve? Will that curve automatically be added to the correct parcel? Is there anyway to modify the existing curve to be tangent to the revised lines? IOW What's the best way to proceed?
Is there anyway to create parcel labels (or any other kind of C3D label) that are NOT annotative?
C3D v.2012
Any quick way of calculating average Parcel Area? I used to export to LandXML and do an area report in CSV. That doesn't seem to be working for me when I export out of C3D 2012.
The workaround I found was to select all the parcels in Prospector, copy to clip board, paste in excel, find and replace "_Sq. Ft._" with 0, then do the average.
I'm trying to add user defined properties to parcels, and then apply various styles to control shading of parcels, and to display some or all of the user defined data, as applicable depending on the values of that data.
I have managed to create a user defined category within my [User-Defined Property Classification] and then create categories within that classification.
The problem I'm having is that I want to be able to see those classifications in prospector so that I can sort based on those values, and then batch assign styles. How to display the classifications.
I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?