I have an existing drawing that was created in AutoCad 2012. I now have AutoCad mechanical 2013 and when I try to insert a steel member into the drawing (metric) the member inserts very small. How do I solve this problem and get the shapes to insert at the proper scale to the drawing?
View 3 RepliesI have a W1`2x40 structural member in a column position. I am cutting elevations, I want the web to show as hidden but can't seem to get it to work. I have attached the drawing with my 2d elevation style.
View 1 Replies View RelatedIn Inventor 2013 it was easily to switch in a drawing view between different iPart members. Through Edit view => Tab Model State and then it was possible to switch between different iPart members. So it was easy to make a copy in the Vault from only the dwg (from a iPart member) and then change the iPart member. Now in Inventor 2014 it is not possible anymore.
View 1 Replies View RelatedThere wasn't a metric template so I created one. I've also been working on setting up Annotative and Dynamic Blocks. Mostly we work in Imperial and so the blocks were drawn in Imperial units.
When I insert some of my Annotative Blocks (Section marks and Labels, etc.), some insert scaled up 25.4 (which is what I want) and others don't.
Take the attached examples:
SOIL-Gravel.dwg is not Annotative. Insunits is set to 1
NOTE-title.dwg is Annotative. Insunits is set to 1.
I notice on my Insert Dialog Box that the Block Unit Factor changes from 25.4 (SOIL) to 1
(NOTE).
For some reason NOTE-Section Cut (Annotative) inserts at 25.4, but the Dynamic Parameters fail to scale up.
I've played around with INSUNITSDEFSOURCE and INSUNITSDEFTARGET, but neither seem to change. I understand they only work if INSUNITS of the block is 0. Which I have also toggled.
I am drawing hydraulic steel pipes using the 3d sketch command. I enter in the points representing the change of direction of the center line of the pipe as if it had no bend radii.
The points are entered in using absolute X,Y,Z coordinates, choosing one end of the pipe as 0,0,0.
I then join the points using the line command. I then put the bend radii on using the bend command.
I then draw a 2d sketch of the 2 circles representing the id , od of the pipe on a normal plane at the start point 0,0,0
I then sweep the 2D sketch along the path of the 3D sketch. I then place axes at the center of each straight portion of pipe . I then place points the intersection points of consecutive axes to replicate the original setting out points (3D x,y,z coordinates) that I used in the 3D sketch.
Then I create my idw with 3 orthographic views (showing the relevant axes as a symbols in each view, an isometric view and a coordinate table showing the x,y,z coordinates of each labelled change of direction. I then pull the pipe into an assembly and put the fittings on each end.
This is another IDW showing the fittings and a parts list. I have inventor suite 2012, along with tube and pipe. However I have never tried it.I don't know how it works, maybe it would be better to use that?
Another question on the measuring of pipes. If a sample is made and then backdraughting needs to be done how do you measure it.
Method used before I arrived was measuring lengths and angles. Highly inaccurate. Never worked. Pipes never drawn. Ended up being photographed only, which was not good enough to make spare parts for service technicians in the field, they had to go out to measure on site and make up on site.
I introduced measuring the change of direction vertices of the centreline of the pipe as if there was not bend radius.
More accurate, but highly difficult to measure. Use steel rules and squares. Never right the first time. Always have to check putting the pipe on top of a full scale drawing.
Tried to improve method of measurement by printing out a A0 piece of graph paper and using that as the background to lay the pipe on. Better/easier and more accurate again, but still not spot on, have to check and adjust using the pipe on top of a full scale plot.
Short of buying some type of expensive 3D measuring machine, which in our case would not warrant the cost as we do not do this type of drawing 100 per cent of our time, not even 30 per cent, what is the best method of measuring pipes accurately.
I recently, can not enter my steel of drawing space.
The following warning displays.
Can i set my drawing in 1:160 metric scale..... because that one scale is not in CAD.........
View 9 Replies View RelatedI have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
View 1 Replies View RelatedI'm trying to make an ATTDEF (in combination with a circle/reference object) to show coordinates in meters, even though the drawing units are in mm.
The general drawing units may not be changed. I want the output to be 7,453 rather than 7453. Yes, with comma and three decimals.. But how ?
I create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies View RelatedWe have some machines which seem to work in imperial maesurement a dn others which work in metric. it is frustrating when trying to insert a map block that is metric and is inserting into a drawing which is set up as imperial. We have tried using the - dwgunits to change to mm, and then using insunits , insunitsdef source and insunitsdeftarget to 0, this works when the PC is currentyl in use. when shut down and restarted it reverts back to imperial setting.
Am i right in thinking this is something that needs to be done at the software installation stage to make it default to metric everytime?
How can I have both Inch & Metric dimensions on a drawing? Preferably, inch above metric below.
View 1 Replies View RelatedI am very new to Autocad. Last time I used it was around 1996 and it is a whole new beast today. I am using Autocad 2012 at the moment.
I need to submit a metric drawing for a proposed borehole amongst utilities that I have been forwarded in .dwg format. The scale needs to be 1:250. I have copied and pasted the utilities information into a new drawing, where I've added my borehole with dimensions, company title block, and some additional notation.
In a system where scaling seems to be varied by zooming, plotting, and drawing - how do I achieve 1:250 scale for submission of this plan?
If you draw in decimal how do you plot in a 1:100 etc scale, i.e. how to plot a metic, scaled drawing.
View 1 Replies View RelatedAutoCAD 2010
Wondering if there's a way to enter imperial units in command line of a metric drawin and have it convert imperial to metric.
IE. I'm constantly taking field site dimensions in imperial and it'd be useful if i didn't have to do conversion every time.
i have a drawing from a client that is in metric and i need to print the drawings in inches in 1:1 for my boss. i should know this but it seems to be a bigger problem than i thought.
View 9 Replies View RelatedI would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
My firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies View RelatedWhen exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies View RelatedI am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
I've been playing around with Pro for a while now, followed quite a few of the tutorials from Messrs Priester and Bouton - which have been great, and a really good way to learn stuff with Xara.
I'm trying to draw a steel ball bearing 'cos I think that would be great way to experiment with gradients and transparencies, - but like a lot of the black arts of digital graphics I can't get a decent result.
Is it possible to obtain Architectural unit dimensioning (ft and inches) in a metric drawing ?
View 3 Replies View Relatedhow to scale out these drawings. I have a CAD drawing using metric scale. This drawing has multiple title blocks. and each title block has its own scale. 1:500, 1:50, 1:150, 1:75. Now I make a block out of each title block and scale them out to find out if they plot out on the same sheet, and they do. Now, I still can't find out the scale factor to print them out to scale. I tried using using the scale shown in for each drawing for example 1:500 and it is super small when I do a print preview.
View 7 Replies View RelatedI would like a few rules to be triggered once the new drawing template is opened.select sheet size, I have been given a rule that already works, basically the rule selects a border and title block based on sheet size selection.
trigger = iTrigger0iLogicForm.Show("BorderChange", FormMode.Modal)iLogicVb.UpdateWhenDone = TrueIf Parameter("BorderSize") = "A0" Then ActiveSheet.ChangeSize("A0", MoveBorderItems := True)ActiveSheet.TitleBlock = "MJTD A0"ActiveSheet.Border = "MJTD A0.
[code]....
I would also like a rule to let me annotate in metric or imperial. this is where I require assistance. I am not sure the best way to achieve this rule. My programming is very basic.I have found some links here, but I can't seem to make them work in the drawing environment. Also these rules seems to change the units of an already created .ipt.
Rule #1 Link
Rule #2 Link
I am just looking for a rule to select either .in or mm from the styles library(i think) , before I even place a base view. Regardless of the original units used to make the model.
Using Civil 3D 2012, is there a way to import/export a list of metric annotation scales for use in another drawing?
View 4 Replies View RelatedI have installed Building Design Suite Premium 2012 and i can´t find the metric libraries or metric templates for any of the 3 revits.
Any of you know how to do it???
I am trying to insert a block from another drawing, the only way I have been to acheive this has been to open the drawing
Set ObjDocument = ThisDrawing.Application.Documents.Open("D:ACADBlocksGENERAL.dwg")
For Each ObjBlock In ObjDocument.Blocks
If InStr(ObjBlock.Name, "LOGO") <> 0 Then
CopyObjects
End If
Next
ObjDocument.Close
I would prefer not to open the drawing to access the block, is this possible in VBA.
Is there any advantage when inserting someone else drawing into yours to xref it rather than copy and pasting into your drawing?
View 1 Replies View RelatedI have an exercise where I created a title block. phase 2 of the exercise asks me to insert the title block into another existing dwg. I went to the insert tab then went to attach the file I had created for the title block.
View 9 Replies View RelatedI am using AutoCAD LT 2009, and am having some problems.
I want to have some jpeg images on my cad drawing, so i just insert the image, which is fine. I can print this fine, and allis good. however,when i go to PDF the drawings, using a standard downloadable DWG - PDF convertor, the jpegs dissapear. everything else is fine, but the jpegs are no longer on the PDF'ed drawing.