AutoCad :: Site A Viewport Within Block
Mar 9, 2012
I am looking to site a viewport within a block in order to control its presence with visibility states. Is there any way of doing this and maintaining the ability to enter mspace through the viewport?
Or is there another way of controlling its presence (like visibility states)? I basically need to give the option of either a portion of the title block showing a site location plan OR a section furnished with an mtext box to add general notes.
View 1 Replies
ADVERTISEMENT
Jun 24, 2013
I'm using C3D 2013. I received a survey drawing (unknown version) from a third party. I tried both xref'ing and inserting as block into my drawing and it was over 7,100' SW from my site. BUT when I copy from 0,0,0 in his drawing and paste 0,0,0 in my drawing, it lands on my site. If I xref my drawing into his drawing, it lands on his survey information. Why doesn't his drawing land on my site when I xref or insert as block?
View 6 Replies
View Related
Mar 24, 2009
why a standard block, created by autodesk (a dynamic arrow with gradiated hatch to be exact), shows in model space but not in the viewport.
It's not on a frozen layer or non print layer.
i am using:
Autocad LT 2009
Win 7 Pro 64bit, Dell Precision M6500
View 9 Replies
View Related
Jun 11, 2012
I am trying to create a viewport field so when you change the viewport scale, the title block will update. The only problem is that I when I scale to 1:500 its stating its 2:1.
As I am working with the unit scale "meters" and when I want to scale my drawing at 1:500 the command I use is z (enter) 2/1xp. But I want the viewport field to say 1:500 instead.
View 9 Replies
View Related
Apr 23, 2012
I have about 10 instrumentation enlarged plans that are drawing in model space and all the equipment text and instrument bubbles and blocks are in paper space.
All of the drawings are at 1/4" but they are getting loaded down with too much info, so we are cutting each of them into twenty drawings instead of ten. While I can change the view port very easily and scale it up accordingly, after I do that I will have to re arrange the text and blocks. I'm looking for a way to scale the blocks and text in a way to where it will change the location of the text and blocks, without actually changing the size. So I bring the drawings up from 1/4" = 1'-0" to 1/2" = 1'-0". If I scale all of the blocks up by 2, it will put them in the right location, but all of the text and blocks will be too large. I could select them all and change their scale down in the property palette, but I would still have to trim down all of the leader lines going from the instruments to their bubbles.
Long story short, is there a way to scale a block or text from a basepoint to where if you scale it, it will change it's location, but not the scale of the block or text?
View 7 Replies
View Related
Jan 6, 2014
How to freeze a specific layer inside a block within the viewport?
View 3 Replies
View Related
Sep 11, 2013
I believe there is a way to create a block of displayed objects that are shown within viewport. I know I have done this before with basic Autocad. The closest thing at the moment that I can think of is "SOLPROF" but that only works for 3D objects.
The way I remember the command working was you started off with the command, select the objects with the viewport/or maybe it was just the viewport, the command made an instantaneous block of the objects that were only within the display area.
View 1 Replies
View Related
Oct 28, 2013
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
View 9 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Mar 9, 2012
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies
View Related
Jan 23, 2013
Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
View 1 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Jul 20, 2011
I am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies
View Related
Jul 1, 2011
I did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
View 2 Replies
View Related
Jan 31, 2012
how do you create a viewport within an existing viewport ?
View 9 Replies
View Related
Mar 4, 2013
Is there any reason to have aligments in a site instead of jsut under the general alignments?
View 3 Replies
View Related
Mar 12, 2012
I'm running several flavors of AutoCAD.I installed some add-ins from the Exchange site into vanilla AutoCAD.Now they are showing up in Map, but each on it's own individual Add-Ins tab.I now have 7 Add-Ins and 1 Plug-Ins tabs.
1 - I didn't think the add-ins would work in anything but vanilla AutoCAD (or is it you just can't access them through Exchange?).
2 - is there a way to get them all on one tab (I tried in the CUI but didn't get it to work)?
View 5 Replies
View Related
Sep 4, 2012
I've never used AutoCAD before but I'm trying to make a site plan. I attached a picture of the property I'm trying to make a site plan of. Basically, it's a building that 59' by 92' that has a fenced in yard that is roughly a rectangle. I'd like to fit the site plan on regular 8.5"x11" sheet of paper. I know how to draw lines but don't know how to make them the right lengths. It doesn't need to be perfect with angles but I'd like to make it look nice with like a border and titles and such. I've been trying to read up on how to do it but I just get overwhelmed.
View 9 Replies
View Related
Jan 26, 2011
I have changed the model to show new areas and coloured them in. They show up on the Model, but not on the set up Site Layout that you print. I can highlight part for the drawing and it will print with the changes. However, if I require the whole drawing the Site Layout prints without the changes. What do I need to do?
View 6 Replies
View Related
Mar 15, 2013
I have AutoCAD 2011 and i am trying to convert a 2D site grid into 3D, but to a certain level
View 1 Replies
View Related
Nov 12, 2013
Is there a method to obtain the overall Site boundary? I have not found one, if there is, but it would sure come in handy when creating reports. We must always include the project Boundary as the first item in a report, so being able to add it to the existing reports would be a huge timesaver.
View 6 Replies
View Related
Dec 20, 2011
I would like the grading of a site to happen only on part of the site; I need the rest of the site to remain unchanged.
I thought I was finished with this project, the volumes seemed about correct, and then I noticed in the comparison surface (showing areas of Cut and areas of Fill) that soil is being taken from parts of the site that need to remain undisturbed. This is a residential site with a conservation easement and other forested areas that we won't be disturbing.
How do I set a boundary or breakline (or what?) to limit the grading/cut/fill to the area I want?
AutoCAD Civil 3D 2010
View 9 Replies
View Related
Sep 3, 2013
If I have a site that I want to grade using two different configurations whats the proper hierarchy of everything? I am confused as to sites-grading groups-surfaces and how they mesh.
Concept A - Site with FFE of 471
Concept B - Site with FFE of 465
View 9 Replies
View Related
Jan 23, 2014
I have (2) separate AutoCAD files; (1) topo, which is at 1"=40'-0" scale, and (1) master site plan from the arch, which is at 1"=30'-0" scale; how do i 'merge' the (2) files and adjust the scales so they match?
View 4 Replies
View Related
Oct 29, 2013
planning consultant has asked me to show the roof pitches on a site plan.
View 9 Replies
View Related
Oct 8, 2012
I want to print off a site using a makerbot that contains some retaining walls as a present for our client. I was hoping to use 123D to print it off to a makerbot, but I have been unable to load a drawing in it. How to 3d print a site, and if so what tricks you have used. I am currently trying to make a solid from a surface and see if that will export.
View 6 Replies
View Related
Feb 8, 2011
how to go about drawing up a site plan
View 9 Replies
View Related
Jun 2, 2012
I am trying to fix the grading on a flat site. As part of that I have all the islands labled A1, A2, A3, B1, B2, B3.
I would like to have the feature lines have the same prefix as the islands. I can create feature line and it will give me the option "Feature". I over write to A1, etc. The next time I add a feature line it flips back to "Feature"
How it picks the prefix for the 6" offset for top & bottom of curb. It would be nice to be able have it keep the prefix until you tell it differently without having to flip to the settings tab for each island.
2012
View 7 Replies
View Related
Jul 17, 2012
I have a rogue feature line that I do not know where or why it appeared from. (Somehow it is a duplicate of my curb line, but offset.)I cannot delete this feature line. It is not applied to any surface as a break line, but when I go to delete it, it freezes autocad.
I have done all the basic steps of purging, audit, recovering, even tried mapclean and I still cannot delete it.
View 6 Replies
View Related
Oct 31, 2013
Is there a way to control what layer a site is created on?
I am surprised I hadn't noticed until now that a site is actually an AECC_PARCEL In 2012 it comes in on the current layer. This causes some undesirable behavior. If your current layer is locked you are unable to create a site. If you later lock the layer the site is on you are prevented from changing site properties. I found it when I could not purge a layer because it contained the site.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 1 Replies
View Related
Apr 26, 2012
i have a preliminary alignment used to create some proposed profiles now we have pin point the location of the correct alignment and i want to copy serveal profiles from the preliminary aligment to the new alignment all at once instead of one at a time with superimpose.
View 4 Replies
View Related
