AutoCad :: How To Draw A Site Plan
Sep 4, 2012
I've never used AutoCAD before but I'm trying to make a site plan. I attached a picture of the property I'm trying to make a site plan of. Basically, it's a building that 59' by 92' that has a fenced in yard that is roughly a rectangle. I'd like to fit the site plan on regular 8.5"x11" sheet of paper. I know how to draw lines but don't know how to make them the right lengths. It doesn't need to be perfect with angles but I'd like to make it look nice with like a border and titles and such. I've been trying to read up on how to do it but I just get overwhelmed.
View 9 Replies
ADVERTISEMENT
Feb 8, 2011
how to go about drawing up a site plan
View 9 Replies
View Related
Jan 23, 2014
I have (2) separate AutoCAD files; (1) topo, which is at 1"=40'-0" scale, and (1) master site plan from the arch, which is at 1"=30'-0" scale; how do i 'merge' the (2) files and adjust the scales so they match?
View 4 Replies
View Related
Oct 29, 2013
planning consultant has asked me to show the roof pitches on a site plan.
View 9 Replies
View Related
Jun 10, 2013
I'm trying to work out a way to calculate the fill volume difference for a proposed landscaping plan (images attached) and how to model and calculate the amount of fill required to do the job.
Site-Plans-4-Recovered.jpgSite-Plans-4-Recovered2.jpg
View 3 Replies
View Related
Mar 25, 2013
I have been sent a 2D site plan that is not to World Coordinates. How do I move this plan to the correct World Coordinates?
Using AutoCAD 2011
View 4 Replies
View Related
Oct 28, 2013
Regarding the use of the 360 mobile app:
I am a site planner/landscape architect in need of displaying autocad site plans on my ipad / iphone. This is possible through 360, but the limit on file size and xrefs is not allowing me to get all of my info viewable. Also, I am in need of inserting aerial imagery so that I may be able to track my location on site via GPS.
View 9 Replies
View Related
Apr 1, 2013
I received a site plan for my house in an unknown scale. It is in 1'=100' scale printed on 24x36, but for some reason I cannot work with it in AutoCAD 2009. I'm trying to place my 1'=30' scale house on the site plan, but the house is ending up gigantic and not to scale. TutorCAD.dwg
View 9 Replies
View Related
Feb 21, 2012
a civil engineer sent us a .dwg file for a site survey. However, the .dwg contours are just showing up as a series of overlapping rectangles. He attached two .txt files, one for elevation point locations, the other for tree locations. Both give coordinates... i.e. :452,2718.7202,2509.7896,569.4979,GL etc. I know that the .txt file is giving locations, but I do not know how to generate plines etc. from the given coordinates in the .txt file. I downloaded ascponit.lsp, but i'm not sure if this is meant for this...
I'm using AutoCAD 2008.
View 3 Replies
View Related
Feb 28, 2013
how to use Civil 3D to create a grading plan for a solar PV site or a golf course?
Here is the situation. We have a large 100 acre site that is not flat. We want to do minimal grading to "smooth out the surface". So that maximum slope on the site is 10%. The site does not have to be graded completely flat. We are trying to work with the existing contours and terrain as much as possible.
Is there some functiion or some way for Civil 3D to "smooth out a surface"? We want to work with the existing slopes and contours of the site and just need a grading plan that will smooth out mounds, holes, or high slope areas.
View 9 Replies
View Related
Feb 9, 2012
I have a finished 2D autocad drawing but I want to use the proposed elevations and change the ones in the google maps import.Does Civil 3D have it built in?
View 9 Replies
View Related
Mar 16, 2011
How to import an engineer's site plan w/ contours so that it displays correctly (i.e., scale, topography, etc.), then use it in elevations, 3d perspective, section?
View 2 Replies
View Related
Apr 24, 2012
How can I calculate the landscape areas in a site plan?
Can I make a schedule to show the landscaping verse asphalt percentage?
View 5 Replies
View Related
Oct 26, 2013
bring back my site plan view!, and the ability to use shadow and realistic material!because when did another site view i am unable to use shadow and realistic view!
View 1 Replies
View Related
Jan 11, 2013
I was working on a project adding topography and trees when revit crashed. I saved a recovery file which i then opened and saved over the old file. what I hadn't noticed was the the defaut site view in the project browser had gone missing. how to recover this view / plan which shows the topography, origin point and survey points etc?
View 1 Replies
View Related
Nov 15, 2013
C3D 2012
I have a number of Sites in my drawing. I want to be able to set a Site current (in LISP) so that when you create or draw a feature line, the site is set to the desired value. I haven't seen a variable or setting for this.
View 9 Replies
View Related
May 16, 2012
by default revit shows roof plan in the Site plan view.
Is it possible to show site plan that one line would represent building contour? Also is it possible to cast shadows of all the building if the first floor is selected?
i was trying to make site plan from the fist floor, but since i gave intense topography ground is being cut and i need full topography. i am using 2013 revit.
View 2 Replies
View Related
Aug 19, 2011
I'm having an issue with JPG attachments. In this case, we are attaching a reference civil site plan drawing. The image correctly appears in the sheet, and even in the "preview" window while exporting to DWF. However, the DWF file does not show the image. Is this a hidden export setting or a view setting in Design Review?
View 3 Replies
View Related
Mar 2, 2011
I already learned how to draw a plan of walls in autocad11 and make sure they have the desired height, so I can now draw a whole floor or story. But I do not know how to draw the one above it or under it.
View 9 Replies
View Related
Sep 30, 2012
who have time for draw a floor plan as .dwg file? She send me a .skp File from a House but i don´t have enough experience for draw it in Auto CAD architecture file.
View 9 Replies
View Related
Jan 7, 2009
What are the options for drawing utilities (namely water lines) in plan view and having them properly show in profile view?
I'm familiar with creating a polyline, turning it into a feature line, weeding vertices, etc. That works all right but is lnog-winded and really doesn't work well when dealing with lots of curves.
View 4 Replies
View Related
Apr 4, 2012
I'd like to draw an half elliptic cylinder with its base on a yz plan ... but I don't find the tool to change from xy to another plan.
View 4 Replies
View Related
May 30, 2012
I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies
View Related
Mar 4, 2013
Is there any reason to have aligments in a site instead of jsut under the general alignments?
View 3 Replies
View Related
Mar 12, 2012
I'm running several flavors of AutoCAD.I installed some add-ins from the Exchange site into vanilla AutoCAD.Now they are showing up in Map, but each on it's own individual Add-Ins tab.I now have 7 Add-Ins and 1 Plug-Ins tabs.
1 - I didn't think the add-ins would work in anything but vanilla AutoCAD (or is it you just can't access them through Exchange?).
2 - is there a way to get them all on one tab (I tried in the CUI but didn't get it to work)?
View 5 Replies
View Related
Mar 9, 2012
I am looking to site a viewport within a block in order to control its presence with visibility states. Is there any way of doing this and maintaining the ability to enter mspace through the viewport?
Or is there another way of controlling its presence (like visibility states)? I basically need to give the option of either a portion of the title block showing a site location plan OR a section furnished with an mtext box to add general notes.
View 1 Replies
View Related
Jan 26, 2011
I have changed the model to show new areas and coloured them in. They show up on the Model, but not on the set up Site Layout that you print. I can highlight part for the drawing and it will print with the changes. However, if I require the whole drawing the Site Layout prints without the changes. What do I need to do?
View 6 Replies
View Related
Mar 15, 2013
I have AutoCAD 2011 and i am trying to convert a 2D site grid into 3D, but to a certain level
View 1 Replies
View Related
Nov 12, 2013
Is there a method to obtain the overall Site boundary? I have not found one, if there is, but it would sure come in handy when creating reports. We must always include the project Boundary as the first item in a report, so being able to add it to the existing reports would be a huge timesaver.
View 6 Replies
View Related
Dec 20, 2011
I would like the grading of a site to happen only on part of the site; I need the rest of the site to remain unchanged.
I thought I was finished with this project, the volumes seemed about correct, and then I noticed in the comparison surface (showing areas of Cut and areas of Fill) that soil is being taken from parts of the site that need to remain undisturbed. This is a residential site with a conservation easement and other forested areas that we won't be disturbing.
How do I set a boundary or breakline (or what?) to limit the grading/cut/fill to the area I want?
AutoCAD Civil 3D 2010
View 9 Replies
View Related
Sep 3, 2013
If I have a site that I want to grade using two different configurations whats the proper hierarchy of everything? I am confused as to sites-grading groups-surfaces and how they mesh.
Concept A - Site with FFE of 471
Concept B - Site with FFE of 465
View 9 Replies
View Related
