Most of the drawings I work in have proxy graphics. Is there a way to set the default to "Show Proxy Graphics" so I don't have the Proxy Information box come up every time I open a drawing?
View 2 Replies
I am working with AutoCAD 2012 LT and initially received a message concerning proxy graphics that listed a number of options for viewing when opening a drawing from another source (that was from another and another, etc). At that time, I believe I chose show proxy graphics, however, I can no longer get that original message to appear, which I think told me which enablers were missing. I now get a message regarding the drawing to be compatible by exploding AEC objects or loading proxy objects enabler. I am stuck, walls have text in them, doors are shown closed.
- I have tried opening the original file again, but no longer receive the original proxy graphics message, just the New version of objects in drawing message. Can I ever get the original message back, have I somehow changed my settings?
-If I change the settings for proxyshow or proxygraphics, these items will disappear.
-How do I know which enabler to use?
What are proxy graphics and why cant I view them?!....trying to view a site layout drawing and half of it is missing, the person who sent me it uses draft sight rather than AutoCAD has that got anything to do with it?
View 9 Replies View RelatedMediastudio 5 pro ultimate
Win7 64
AMD 960T on six cores
Asus M5A78L M LX +
8 GB
HD 3000 integrated graphics
OS is installed on a 128 MB SSD
Project target file is on a 500GB WD Blue.
I have ripped a Blue Ray DVD as an .m2t, at an average bit rate of about 18.5 Mb/sec, with a resulting file size of over 16GB. Needles to say this file bogs the machine when not running the proxy. When I finish a session and close the program, the proxy file is gone the next time I open the project. The same thing happens when the machine goes to sleep with the project open. I have to either slog through working directly on the project without the proxy while it slowly rebuilds, or wait a couple of hours for the rebuild to complete.
Any way to stop the file from being deleted? I went to power options and selected never, but the next day it was gone again.
Another thing would be to increase the speed of the proxy creation, as it only uses about 20% of the CPU. Better to get it done faster... I have tried raising the priority of the process to high with little if any change.
want to upated attributes in proxy entity is this possible?
View 1 Replies View RelatedFor several releases Autocad's layer manager has shown only XREF layers in the layer manager by default. Open a drawing with Xrefs (nearly every drawing I have ever worked with) and to access the layers that are actually *in* the drawing, I must first open the layer manager, select the "Xref" filter, and check the Invert Filter box. Then I see the layers that would more logically be shown be default.
Does any way to change this so the non-Xref layers show up be default??? I am currently using Autocad Architecture 2012.
When you have a part with a thread feature, the default setting should show the thread feature in the drawing view...rather than making the user right click the view and select "Display Thread Feature". I don't understand why this doesn't show up in the drawing automatically...it is, after all, a feature on the part.
View 3 Replies View RelatedHow can I set Show Rulers as default to all documents?
View 4 Replies View RelatedPhotoshop hides some of the menu items. Often I don't know exactly what I'm looking for and need to be able to see everything. It also restricts the use of keyboard shortcuts. I'd like, for example, to be able to go Alt-I-M-C to change the image to CMYK, but since the CMYK option is hidden it doesn't recognise the last bit and I have to use my mouse.It's a small niggle,
View 3 Replies View RelatedWe have just installed a new server and transferred all the information accross. Since this point, all my inserted graphics (company logo etc. in *.jpg format) have disappeard. Instead of the graphic, a little box appears with text stating the path where the original graphic was stored on the old server.
Since then I have tried to recreate a drawing block which works until I then insert that block into my drawings and they disappear again. I have given the new blocks different names, I have delieted all the old blocks from the drawing and purged, but every time I insert the block into the drawing, the graphics disappear. I have even tried inserted them into the drawing individually from the original jpeg stored on the new server which also doesn't work.
I have attached both files.Is there a way to rectify this or is there a different way to create a drawing title block
Yes (Command I) is a quick fix to this issue but wondering why the default is set as invert?
View 10 Replies View Relatedi have to change it t pixel everytime i start up photoshop.
View 6 Replies View Relatedhow to show dimensions for any room in plan , instead of default Area (SQ FT)
For example ....BEDROOM 10' 3" x 10' 0"
PSE 11 defaults to folder only and I wish to view by the complete folder list inc sub-folders.
View 3 Replies View Relatedhow can I get it to always show the layer edges?
View 1 Replies View RelatedCurrently you have to check a box, and then build a module for H.264 export.
We all get it that you want people to use Media Encoder. But I never use it. It forces me to render a separate file, then re-render that file. I don't need the extra lossless files floating around my machine, and H.264 mp4's looks great coming straight out of after effects.
Since upgrading I've had set up 4 people output workflow. They all went back to making huge MOV files.
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedIs it possible to create proxy object using .net in AutoCAD?
View 1 Replies View RelatedI received a drawing from an outside contractor that uses something with proxy entities. I can see them just fine on the screen but when I try to plot the drawing they disappear. It also came from a newer version so I had to use the DWG True View to convert it if that may have caused my issue.
View 5 Replies View RelatedIs it possible to edit acad proxy entity.
View 6 Replies View RelatedWhen i start up AutoCAD C3D 12, this dialog box is pop up " This drawing was created with a newer version of Civil 3D. All entities created by Civil 3D within the drawing are in a proxy state..............are disabled for this drawing." I just started an AutoCAD, Not open any drawing yet!
How do i turn this message off? (permanently)
P.S. It just happened recently since the IT guy changed some variables on my machine, but no clue what variables he changed?
I’ve already tried to purge and audit the file and delete every object that I can find that may be a proxy but it still shows up every time I open the file
Is there any way for me to QSELECT or remove the object that is causing me problems
I do have the enablers on so I can see the object problem is there so many objects I don’t know where to start looking.
I have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
But when I double click out of the file manager it opens X5 ??
View 2 Replies View RelatedI have all my color setting set to RGB but when opening already saved documents the colors still show up to be CMYK. How do I change this?
View 8 Replies View RelatedI recently received an autocad drawing with a number proxy entities in it. They exploded ok. However by exploding them am I losing any properties that may be useful. And what really are proxy entities?
View 7 Replies View RelatedMost individual want to remove the Proxy Information Dialog Box. I already understand how to turn this off PROXYSHOW/PROXYNOTICE/PROXYGRAPHICS. What I'd like to know is where the data that is displayed in the Proxy Information Dialog Box comes from? Is there a way to get this information after the fact (as in, after I've closed the dialog box, but while the current drawing is open)?
View 1 Replies View RelatedI have ACA2011. I received a Topo from someone an it's grade lines are Proxy Entities. I need to snap to one and can't. Is there a way to snap to these? I just want to move the topo to the right Z height, but need to snap to at least one grade line to do so.
View 1 Replies View RelatedOur office has upgraded to new Windows 7 computers with AutoCAD 2013.
For the last (3) years, we have had an RTEXT in our titleblock file that shows the path, file name, date, and time. This RTEXT thingy was originally copied from a consultants file to ours. The titleblock file is x-reffed to the other sheet files, and has been working fine in all files until the upgrade.
Now, when we open a file, the only thing that is shown for the RTEXT is the bounding box. This happens on all of our computers. The express tools are installed. If I type RTEXT > [enter], it displays correctly and will work fine ... until the CAD is shut down. If it is re-opened, once again, just the bounding box.
Typing the command every time I open the file is a nuisance for me, and is something that others in the office would never get used to doing.
So I wrote this script last night, well recorded it in Corel really
Sub NewDoc() ' ' Recorded 8/8/2011 ' ' Description: ' ' Dim doc1 As Document Set doc1 = CreateDocument() doc1.MasterPage.SetSize 11#, 8.5 With doc1.MasterPage .Orientation = cdrLandscape .PrintExportBackground = False .Bleed = 0# .Background = cdrPageBackgroundSolid .Color.CMYKAssign 0, 0, 0, 5 End WithEnd Sub
Mainly used to open a new document and make the layout background solid and non printable. I really like this feature since I work with the color white a lot, however I could not find any setting to start new documents with anyway. The macro creates a new doc and changes the layout setting to what I like, but when i run it with no documents open, the only menus i get are File View Tools.
