I’ve already tried to purge and audit the file and delete every object that I can find that may be a proxy but it still shows up every time I open the file
Is there any way for me to QSELECT or remove the object that is causing me problems
I do have the enablers on so I can see the object problem is there so many objects I don’t know where to start looking.
I have several hundred drawings that I needed to update the Title Block on. I used Toolpac to Redefine the blocks, then Scriptpro to run a simple script to ATTSYNC the blocks. This was all done in AutoCAD Map 3D 2012. Now, when my users open the drawings with AutoCAD LT 2012, they get a proxy graphics warning. I opened a drawing in AutoCAD 2012 as well and the proxy warning came up there too so I know it's not just LT. I assume it has to do with AutoCAD Map, however when I've run the same sort of processes (updating title block) from the command line in Map 3D, the proxy graphics aren't introduced.
I am unsure how to determine what proxy graphic was introduced. I've tried a lsp to delete the proxy but it says none was found.
LISP application that will remove Proxy Images from inside a selected block?
View 9 Replies View RelatedI'm using Max 2012, and I wonder if there's a simple way to create an object that, when selected, would select a different specified object in the scene.
I'll explain the situation. I'd like to make a series of spline drawings in the shape of my rig, basically creating a simplified drawing of a skeleton, and then be able to click on, for example, the upper leg of this simplified drawing, and have the actual upper leg bone within the rig itself become selected.
Ideally, I'd like for the spline drawing I clicked to be unselected after I click it, leaving only the bone it represents selected. In essence, I want to make a group of "buttons" that can be used to select bones and helpers within a rig.
Mediastudio 5 pro ultimate
Win7 64
AMD 960T on six cores
Asus M5A78L M LX +
8 GB
HD 3000 integrated graphics
OS is installed on a 128 MB SSD
Project target file is on a 500GB WD Blue.
I have ripped a Blue Ray DVD as an .m2t, at an average bit rate of about 18.5 Mb/sec, with a resulting file size of over 16GB. Needles to say this file bogs the machine when not running the proxy. When I finish a session and close the program, the proxy file is gone the next time I open the project. The same thing happens when the machine goes to sleep with the project open. I have to either slog through working directly on the project without the proxy while it slowly rebuilds, or wait a couple of hours for the rebuild to complete.
Any way to stop the file from being deleted? I went to power options and selected never, but the next day it was gone again.
Another thing would be to increase the speed of the proxy creation, as it only uses about 20% of the CPU. Better to get it done faster... I have tried raising the priority of the process to high with little if any change.
want to upated attributes in proxy entity is this possible?
View 1 Replies View RelatedI have been using autocad for a while and have always been able to use "R" to remove objects from a selection set. All of a sudden now when I want to use that command it activates the "Redraw" command instead of letting me remove objects from my set.
How to get it back to the way I had it before?
I am currently working on a project with an architect and I have some elevations that are in the current floor plan sheet. During the last project review he wants to move them off the floor plan sheet and onto another sheet. No Problem. However when i went back to regenerate the elevation to copy to another sheet, I noticed that there were a flashing boxes where the old elevations were. Is there something there that needs to be purged somehow. I tried using the purge command and they are still there.
View 1 Replies View RelatedIs it possible to bind a drawing and have only the objects visible in the viewport to remain in model space after binding. I'm working with some pretty big models and am trying to reduce file sizes after binding.
View 3 Replies View RelatedI'm using Photoshop CS2 and I need to remove the background from an image which has tulle with many folds, how do i keep the transparency?
View 3 Replies View RelatedMy boss came to me with a max question and its been a while since ive used max. he has a single diagonal line on the face of every solid in his model. I tried every fix i know and nothing worked.
then we found a site and the fix worked after reboot, for all of 5 minutes and the it went back. He is using XP based pc with MAX7.
I am using stokes to mask out a shape I want. I want to remove these strokes altogether but retain the masked shape.
So for example the below image has three circles with a white stroke to form the shapes I desire.
I am perfectly happy with this when it is on a white background but I want the strokes to be transparent rather than white so that they cannot be seen on a non-white background (see below).
Obviously if I just make the strokes transparent I lose the desired shape.
This is what I am trying to achieve (this was done in Photoshop but I want to achieve the same in Illustrator).
Basically, I am working on this pause screen pic from Mass Effect 3. I am trying to turn it into a good background for my phone. I'm trying to do a number of things with it, some of which are proving easier than others. The most difficult thing I want to do is remove all the buttons from the right hand side, so there are five buttons on the left and just background on the right.
How would be best to go about this? I have tried selecting individual sections and painting over them with a gradient fill, and I've tried using an automatic resynthesizer plugin using a selected texture, but neither have yielded good results. The former becomes obvious due to its uniformity when done in large doses and the latter just comes out all wrong.
I am trying to iterate through objects in a layer and if the object satisfy a condition, I want to remove it.
Problem is that from what I suspect, if I use a "for loop" then when I remove an element, the initial length of the loop becomes invalid by removing the element. So what I would need is to iterate through objects in another matter and I am clueless.
I have attached some pictures, you can notice the flash spots due to reflection on silver color. What's the best way to remove these spots and improve the photo quality. (I understand the best way is to shoot the photos in a specific environment to disallow this effect, but I am asking if there is away to edit it using Light room and remove the flash effect).
[URL]......
[URL]......
[URL]......
[URL]......
[URL]........
[URL].........
I have attached some pictures, you can notice the flash spots due to reflection on silver color. What's the best way to remove these spots and improve the photo quality. (I understand the best way is to shoot the photos in a specific environment to disallow this effect, but I am asking if there is away to edit it using Lightroom and remove the flash effect).
[URL]
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
I've been getting pink or purgle lines bordering certain objects in my photographs. You can see them on the RAW images. When I merge them using HDR you can see how prominent the lines become. I'm not sure if the problem occurs in my camera (Canon T2i) or lens when I take the shot.I've tried using Color Range and the Magic Wand Tool but it is a tedious process.
View 17 Replies View Relatedhow to birhgten and shapren and use the stamp tool to remove unwanted objects. but how would i go about making this picture look fantastic. im using it as my desktop but it looks a little fuzzy. i added title and switz flag to it.
View 5 Replies View RelatedRemove unwanted objects with content-aware healing
View 12 Replies View RelatedIs it possible to create proxy object using .net in AutoCAD?
View 1 Replies View RelatedI received a drawing from an outside contractor that uses something with proxy entities. I can see them just fine on the screen but when I try to plot the drawing they disappear. It also came from a newer version so I had to use the DWG True View to convert it if that may have caused my issue.
View 5 Replies View RelatedIs it possible to edit acad proxy entity.
View 6 Replies View RelatedWhen i start up AutoCAD C3D 12, this dialog box is pop up " This drawing was created with a newer version of Civil 3D. All entities created by Civil 3D within the drawing are in a proxy state..............are disabled for this drawing." I just started an AutoCAD, Not open any drawing yet!
How do i turn this message off? (permanently)
P.S. It just happened recently since the IT guy changed some variables on my machine, but no clue what variables he changed?
I am working with AutoCAD 2012 LT and initially received a message concerning proxy graphics that listed a number of options for viewing when opening a drawing from another source (that was from another and another, etc). At that time, I believe I chose show proxy graphics, however, I can no longer get that original message to appear, which I think told me which enablers were missing. I now get a message regarding the drawing to be compatible by exploding AEC objects or loading proxy objects enabler. I am stuck, walls have text in them, doors are shown closed.
- I have tried opening the original file again, but no longer receive the original proxy graphics message, just the New version of objects in drawing message. Can I ever get the original message back, have I somehow changed my settings?
-If I change the settings for proxyshow or proxygraphics, these items will disappear.
-How do I know which enabler to use?
I recently received an autocad drawing with a number proxy entities in it. They exploded ok. However by exploding them am I losing any properties that may be useful. And what really are proxy entities?
View 7 Replies View RelatedMost individual want to remove the Proxy Information Dialog Box. I already understand how to turn this off PROXYSHOW/PROXYNOTICE/PROXYGRAPHICS. What I'd like to know is where the data that is displayed in the Proxy Information Dialog Box comes from? Is there a way to get this information after the fact (as in, after I've closed the dialog box, but while the current drawing is open)?
View 1 Replies View RelatedWhat are proxy graphics and why cant I view them?!....trying to view a site layout drawing and half of it is missing, the person who sent me it uses draft sight rather than AutoCAD has that got anything to do with it?
View 9 Replies View RelatedI have ACA2011. I received a Topo from someone an it's grade lines are Proxy Entities. I need to snap to one and can't. Is there a way to snap to these? I just want to move the topo to the right Z height, but need to snap to at least one grade line to do so.
View 1 Replies View RelatedOur office has upgraded to new Windows 7 computers with AutoCAD 2013.
For the last (3) years, we have had an RTEXT in our titleblock file that shows the path, file name, date, and time. This RTEXT thingy was originally copied from a consultants file to ours. The titleblock file is x-reffed to the other sheet files, and has been working fine in all files until the upgrade.
Now, when we open a file, the only thing that is shown for the RTEXT is the bounding box. This happens on all of our computers. The express tools are installed. If I type RTEXT > [enter], it displays correctly and will work fine ... until the CAD is shut down. If it is re-opened, once again, just the bounding box.
Typing the command every time I open the file is a nuisance for me, and is something that others in the office would never get used to doing.
Most of the drawings I work in have proxy graphics. Is there a way to set the default to "Show Proxy Graphics" so I don't have the Proxy Information box come up every time I open a drawing?
View 2 Replies View Related