We have just installed a new server and transferred all the information accross. Since this point, all my inserted graphics (company logo etc. in *.jpg format) have disappeard. Instead of the graphic, a little box appears with text stating the path where the original graphic was stored on the old server.
Since then I have tried to recreate a drawing block which works until I then insert that block into my drawings and they disappear again. I have given the new blocks different names, I have delieted all the old blocks from the drawing and purged, but every time I insert the block into the drawing, the graphics disappear. I have even tried inserted them into the drawing individually from the original jpeg stored on the new server which also doesn't work.
I have attached both files.Is there a way to rectify this or is there a different way to create a drawing title block
I inserted a scanned PDF xref and now I can't get it to plot in a viewport. Is there a way to make the inserted PDF opaque so that objects behind it don't show.
I have two PDFs slightly overlapped, and for some reason all of the areas that are transparent in the PDF print with grey outlines in a PDF, but not when sent to a hard copy printer.
I need to insert an image into AutoCAD 2011, but it has to be embed (not a separate file).When I insert the image as an OLE, it's poor quality and pixelated. Is there any other way to insert an image file into the dwg?
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
Most of the drawings I work in have proxy graphics. Is there a way to set the default to "Show Proxy Graphics" so I don't have the Proxy Information box come up every time I open a drawing?
I often toggle between Portrait and Landscape when I begin working out a layout. Is there an easy way to make the Printable Area dotted lines automatically follow suit? My printer's default is already set to "Match Orientation".
Up till now I have been going to File>Print Setup>Preferences>Layout>Portrait or Landscape for each and every toggle!
When I save a Corel X5 file the thumbnail doesn't show an image like it did when I saved a corel file in X3. It shows the green pencil symbol .....is this normal?
why all-the-sudden this macro does not show up in the list of macros? I'm not sure if it is conflicting with something else and it's been happening off and on.
I've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.
All the products installed on my Win 7 Pro 64 Start Menu show the jumplist properly, including Corel X5. This is not working for X6. Yes, I know I can use the Open Recent. menu once I am in CorelDraw.
I've been using Corel Draw and Photo-Paint for many years, on many versions of Windows, and as far as I remember, Windows Explorer has always shown a thumbnail for a .cpt file instead of the plain icon.
I've now got a Windows 7 machine (professional version 64 bit), and .cpt files show up as plain white icons, instead of thumbnails.
Is there a way to have the status bar show up whenever a file is printing or saving. So far the only way it shows up is if you click on the little icon at the bottom right of the window.
When I select "Save As" or "Export", the list of available file formats is only a fraction of what the help file shows as supported file formats. The help file instructs me to use the instructions in "To modify or repair a CorelDRAW Graphics Suite installation" but this does not work. How can I get or verify that all the file format filters listed in Supported file formats are installed in my CorelDraw 15?
Right now I am particularly interested in saving a CDR in the Visio (VSD) file format, but I would like to have of them available.
In Connect I see only blank thumbnails of my .cdr files. The nice thing of this program should be thati can scroll through my files and look at large thumbnail So I know what iám working on.
I'm using Windows 7. The previews were working now they just don't work, "preview not available". I see no check box in window 7 to turn that on or off, unlike in windows xp. I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.
Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.
Is there a way to create a keyboard shortcut to hide a layer? I'm building a drawing by tracing a bitmap on a separate layer. I turn the layer visibility off & on a lot to check my work.
I have so many objects, the little eyeball in the object manager keeps scrolling out of its window .
My object manager all of a sudden decided to not show the objects on the layers. If I click the "eye" on the layer it will show or hide, but the names of the objects on the layers are not listed under the layer name.
If I right click on the layer, it has the check beside visible, printable, and editable. I have Corel Draw Graphics Suite X4.
Using 2011 Civil3D at the moment. Im trying to insert a PDF as an xref and once its in the model space, it won't let me rotate or scale the image. When clicking on it, the nodes in each corner do not appaear.
I am trying to export a file for my printer and my CMYK colors are not looking right on the exported file, they are very dull and the colors are not the same at all.
I have changed my DRAW files to be ONLY CMYK colors and have experimented with the Color Management tool to no use at all and reset the workspace.
For example: the blues that my client chose are C56 M0 Y6 K0 and C30 M0 Y60 K0 - they look great onscreen, but once I export to a jpg/eps/tif/etc the colors dull down and don't match at all!
For some reason my text option list will only show one font option at a time (in CorelDRAW 11), but when I use X4 it shows the 5 last ones. Where in the 'Options' section can I correct that to show the longer listing?
I modified the "Prepress" pdf preset to show crop marks and saved this pdf preset as "Cropmarks". However when I use the "Collect for Output" wizard, the new pdf preset (i.e. "Cropmarks") does not show up as an option in the dropdown.
Is there a way to make it available/show up in the "Collect for Output" wizard?
Corel Supports Unicode & Open type Features but does not show ithi oberon,can you tell me why the screen shows combined ligature while corel document shows part of ligature made of.i wanna use text as displayed in encode check the first word Language Gujarati
I am using a WMS in Autodesk 3D Map 2012 to display an Arial image in the Model area. As I zoom in, the Arial image changes showing things in more detail.
Is there a way to crop the image inside a specific boundary? Keep in mind that the image is basically a WMS, not a raster image.
P.S. If i try to print the area of the WMS Arial image that I am interested in (in order to avoid cropping) the result is a grey area.
I created a block w/ attributes for my border and saved it for future use on other drawings. But when I insert it, even if the units are the same the blocks I inserted scaled smaller than the actual border that i wanted it to be.
