Corel Supports Unicode & Open type Features but does not show ithi oberon,can you tell me why the screen shows combined ligature while corel document shows part of ligature made of.i wanna use text as displayed in encode check the first word Language Gujarati
View 1 Replies
What's the easiest way to determine if an Open Type font is enhanced with ligatures, optional caps, etc? I have not found any means other than to open each one individually and try to implement the features.
View 1 Replies View RelatedI frequently require mathematical symbols such as ≤ or ≥, which are easy enough to insert as unicode characters and supported by common fonts such as Arial.
However, when I try to import text containing such characters, such as within an Excel table, they just import as "?" instead. I've tried pasting Excel table in various formats. As an Excel object or a Metafile the overall formatting is retained correctly but the symbols become question marks. Enhanced Metafile preserves the symbols but alters the fonts so that the text no longer fits within the cell, ruining the layout.
I've also noticed that when I manually insert unicode symbols using the text tool in CorelDraw X6 it changes the font to Adobe Fangsong Std R (which looks awful). If I try to change the font after the fact, everything changes except the symbols. Highlighting the symbols also looks different: rounded highlight rectangle versus normal rectangle for ordinary text. It seems CorelDraw refuses to treat these symbols as ordinary unicode text forcing them instead into this horrible wirey font instead.
I also have issues try to export from CorelDraw to say Powerpoint where Corel will automatically format some text as ligatures but when exporting these just show up as "?" in Powerpoint.
1) Is there any way to get CorelDraw X6 to reliably import and export text, including unicode symbols, without messing up the formatting/layout.
2) is there any way to get CorelDraw not to change the font of symbols?
I'm using Windows 7. The previews were working now they just don't work, "preview not available". I see no check box in window 7 to turn that on or off, unlike in windows xp. I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.
Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.
I use CorelDraw X4 to design CD covers that need Devanagari characters. However I found that using fonts like Mangal (which is used for devanagari in MSOffice) is not supported - the double-consonants are displayed incorrectly. how to type in Devanagari in CDR X4?
View 8 Replies View RelatedIn Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
CorelDraw 12 & Windows XP.
Type 1 fonts not displaying. Open Type & True Type OK. Type 1 OK in all other programs. Problem just happened a day or so ago.
How can I have the numbers in order ,Without typing them ( like in Excel )?
for example: having numbers from 1 to 1000 without typing them
KitchenCriativa_ai_sample.png
As part of a "kit", I need to export my files to 8 different file types. I've never really checked the .ai file type before as to how it appears. I did, however, tonight and found awful results. When I import my .ai file back in it looks awful. I'll post samples so you can see.... How to fix this on export? (How to upload both files so the one you see below is the result of the .ai export)
I seem to vaguely recall a method from some vector drawing program where you can press or hold ctrl or alt or shift and change the next type of node you will draw while using the bezier tool, or the pen tool, or the multi-line tool.
Is there any way to do this in 12, or use VBA to make it happen. I really just need to switch back and fourth between cusp and symmetrical.
if you can type the alpha symbol for angle in Coreldraw.
View 2 Replies View RelatedI just got a new computer. I am currently making a postcard and the text won't type...
My old computer was Windows XP and my new computer is Windows 7. It installed with no problem.
blend.cdr
I have an arc shape that I'm trying to fill with a gradient-type blend where it will be 0% spot on the lower left side gradually going around to 100% spot on the lower right side. The example I have attached shows the shape on the left with a conical fountain just to give an idea of something close, but it won't actually work for my shape. I also attached a cdr X5 file which contains a blend I was working on, but can't seem to get it to work (that is the shape on the right). I tried cutting it in half which works, but I still can't get it.
I have all my color setting set to RGB but when opening already saved documents the colors still show up to be CMYK. How do I change this?
View 8 Replies View RelatedI am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
Not sure if this is expected behavior but I've found that it's only possible to snap to one type of guide/grid at any given time.
For example if you want to snap to a guideline in the horizontal and the pixel grid in the vertical, you won't be able to. Instead, the snap will work on the guide and completely ignore the pixel grid.
issues using True Type Fonts when printing some text through CorelDraw x6. Basically I do screen printing, and I have issues printing TTF's... The text when it prints out chops letters/adds spacing where its not needed, and towards the end of the sheet of vellum - starts to print the first letter of word on the left over again...
I haven't had issues printing off of my HP printer, but that broke so I invested in a BROTHER HL-2230 monochrome laser printer.
I often toggle between Portrait and Landscape when I begin working out a layout. Is there an easy way to make the Printable Area dotted lines automatically follow suit? My printer's default is already set to "Match Orientation".
Up till now I have been going to File>Print Setup>Preferences>Layout>Portrait or Landscape for each and every toggle!
In X4 I was able to see the names of fill colors in the lower right corner. This information does not appear in X6. Instead, there are only numbers.
How do I get the color names to appear in X6?
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedWhen designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
When I save a Corel X5 file the thumbnail doesn't show an image like it did when I saved a corel file in X3. It shows the green pencil symbol .....is this normal?
View 8 Replies View RelatedQQ截图20120523105022.png
Strokes list inside style pattern is not displayed inthe art of pen tool, but can be used normally.
why all-the-sudden this macro does not show up in the list of macros? I'm not sure if it is conflicting with something else and it's been happening off and on.
CorelDraw X4 (14.0.0.704)
Win 7 64bit
12GB RAM
Recently, when I draw a line, it not show the line until done it.
Means, I cant see where is my actual line.
Moreover, when i highlight the object (many objects), it doest show where is my line indicator...
I've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.
View 14 Replies View RelatedAll the products installed on my Win 7 Pro 64 Start Menu show the jumplist properly, including Corel X5. This is not working for X6. Yes, I know I can use the Open Recent. menu once I am in CorelDraw.
View 4 Replies View RelatedI've been using Corel Draw and Photo-Paint for many years, on many versions of Windows, and as far as I remember, Windows Explorer has always shown a thumbnail for a .cpt file instead of the plain icon.
I've now got a Windows 7 machine (professional version 64 bit), and .cpt files show up as plain white icons, instead of thumbnails.
When I mirror horizontally and print the text will not show up. I can print fine Vertical, normal but not horizontal?
View 2 Replies View Related
