CorelDRAW Graphics Suite X4 :: How To Type In Devanagari

Feb 19, 2009

I use CorelDraw X4 to design CD covers that need Devanagari characters. However I found that using fonts like Mangal (which is used for devanagari in MSOffice) is not supported - the double-consonants are displayed incorrectly. how to type in Devanagari in CDR X4?

View 8 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X6 :: Resizing Font Changes It In Another Type

Dec 20, 2013

In Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize  manually. I post a sequence about this problem.

Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.

View 3 Replies View Related

CorelDRAW Graphics Suite 12 :: Type 1 Fonts Not Displaying?

Dec 18, 2012

CorelDraw 12 & Windows XP.

Type 1 fonts not displaying. Open Type & True Type OK. Type 1 OK in all other programs. Problem just happened a day or so ago.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Type Numbers In Order

Nov 1, 2011

How can I have the numbers in order ,Without typing them    ( like in Excel )?

for example: having numbers  from 1 to 1000  without typing them

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting To AI File Type

May 9, 2011

KitchenCriativa_ai_sample.png

As part of a "kit", I need to export my files to 8 different file types.  I've never really checked the .ai file type before as to how it appears.  I did, however, tonight and found awful results.  When I import my .ai file back in it looks awful.  I'll post samples so you can see.... How to fix this on export?  (How to upload both files so the one you see below is the result of the .ai export)

View 10 Replies View Related

CorelDRAW Graphics Suite 12 :: Changing Next Node Type While Drawing

Aug 24, 2011

I seem to vaguely recall a method from some vector drawing program where you can press or hold ctrl or alt or shift and change the next type of node you will draw while using the bezier tool, or the pen tool, or the multi-line tool.

Is there any way to do this in 12, or use VBA to make it happen.  I really just need to switch back and fourth between cusp and symmetrical.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Type Alpha Symbol For Angle

Aug 16, 2011

if you can type the alpha symbol for angle in Coreldraw.

View 2 Replies View Related

CorelDRAW Graphics Suite 12 :: Making A Postcard And Text Won't Type

May 11, 2011

I just got a new computer.  I am currently making a postcard and the text won't type...

My old computer was Windows XP and my new computer is Windows 7.  It installed with no problem.

View 7 Replies View Related

CorelDRAW Graphics Suite X6 :: Enhanced Open Type Fonts?

Mar 23, 2012

What's the easiest way to determine if an Open Type font is enhanced with ligatures, optional caps, etc? I have not found any means other than to open each one individually and try to implement the features.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Fill With Gradient Type Blend

Nov 28, 2011

blend.cdr

I have an arc shape that I'm trying to fill with a gradient-type blend where it will be 0% spot on the lower left side gradually going around to 100% spot on the lower right side. The example I have attached shows the shape on the left with a conical fountain just to give an idea of something close, but it won't actually work for my shape. I also attached a cdr X5 file which contains a blend I was working on, but can't seem to get it to work (that is the shape on the right). I tried cutting it in half which works, but I still can't get it.

View 8 Replies View Related

CorelDRAW Graphics Suite X3 :: Type Facing Text To Exact Dimensions

Aug 5, 2011

I am having a problem trying to get text to fit to exact dimensions.  Here is a link to a graphic representation of the problem I will explain below: [URL] .......... 

This is an example of a plaque I'm working on.  The red box Q will be a photograph while the black box will be text (represented by the blue lines).  I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q.  Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.

I can't make the text fit correctly.  If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch.  If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC).  Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.

When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Objects Only Snap To One Type Of Guide At One Time?

Jan 15, 2013

Not sure if this is expected behavior but I've found that it's only possible to snap to one type of guide/grid at any given time.

For example if you want to snap to a guideline in the horizontal and the pixel grid in the vertical, you won't be able to.  Instead, the snap will work on the guide and completely ignore the pixel grid.

View 10 Replies View Related

CorelDRAW Graphics Suite X6 :: Using True Type Fonts When Printing Some Text?

Sep 25, 2012

issues using True Type Fonts when printing some text through CorelDraw x6. Basically I do screen printing, and I have issues printing TTF's... The text when it prints out chops letters/adds spacing where its not needed, and towards the end of the sheet of vellum - starts to print the first letter of word on the left over again...

I haven't had issues printing off of my HP printer, but that broke so I invested in a BROTHER HL-2230 monochrome laser printer.

View 12 Replies View Related

CorelDRAW Graphics Suite X5 :: Supports Unicode And Open Type Features But Does Not Show It

Apr 3, 2011

Corel Supports Unicode & Open type Features but does not show ithi oberon,can you tell me why the screen shows combined ligature while corel document shows part of ligature made of.i wanna use text as displayed in encode check the first word Language Gujarati

View 1 Replies View Related

CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?

Mar 18, 2012

why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.

I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?

Dec 1, 2010

We are having a big problem with dropping lines of text or parts of graphics.  It is happening on 3 different laser systems and 2 different printers. 

View 14 Replies View Related

CorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly

Sep 5, 2009

Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics

Jul 21, 2013

i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.

 I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.

It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution.  Maybe X6 is more stable when exports or I have to simplify the project somehow but...

FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size

Nov 9, 2011

I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.

When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.

Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Entire Suite Freezes On Start Up?

Jul 23, 2011

Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens. 

A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.

I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates. 

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Mixing Vector Graphics And Bitmaps

Mar 14, 2011

I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting Web Graphics To Correct Size

Dec 1, 2011

How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.)  However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.

Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?

May 9, 2011

X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.

Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects.   Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.

Very costly and time consuming - print preview shows all correct but output is not the same.

Running Win 7 64bit  8GB Ram

View 14 Replies View Related

CorelDRAW Graphics Suite X6 :: Opening AI File That Have Linked Graphics

Jun 19, 2013

I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?

As a sub note I can't go back to the supplier of the Ai file to make any changes.

View 4 Replies View Related

CorelDRAW Graphics Suite X4 :: Links To Graphics Are Broken When Using Help File

Oct 18, 2012

I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?

As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e.  you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?

Jan 2, 2013

02012013010.jpg

Blank Blocks behind text and graphics

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Error While Installation - No Graphics Shown

Dec 6, 2013

After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:

What does it mean? I can´t imagine where this comes from?!? How to handle this fault?

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Dual Graphics Cards

May 22, 2011

I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5.  Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5). 

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Export PDF When Graphics Has EPS Files In It?

Jun 9, 2011

Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF  - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Print Merging Graphics

Nov 6, 2013

I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts.  I use a fixture that holds 40 parts, two rows of 20, for each type of part.  I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file.  The lasering file is just as many pages as I need to run the order and is much smaller than the master file.

That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month.  That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all.  I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.

What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually.  I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Unable To Uninstall Graphics

Jun 13, 2011

When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved