AutoCad :: PDF Image Will Not Print In PS?
Mar 2, 2013
I am using Revit MEP 2013. I inserted a pdf in model space. My drawing and original pdf file is in the same directory. I can print the image while I am in model space. I went to paper space and used a polygon viewport to make the pdf show in PS (had to use polygon to get rid of unwanted items on pdf). The viewport that has the MS pdf won't print on any of my printers and won't show in print preview. I have checked to make sure all layers are on a print layer and made sure that the image in MS was not on defpoints. I originally dragged and dropped the pdf into MS. I then used xref to attach the drawing. Neither method would print in PS.
View 4 Replies
ADVERTISEMENT
Mar 14, 2014
Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
View 1 Replies
View Related
Apr 19, 2013
When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies
View Related
Sep 12, 2012
I have a drawing with loads of images on it. All I want to do is print the image name so instead of a picture showing it should say "banana.jpg" or whatever the image name is.
I've tried unloading the images and plotting, but nothing happens.
View 6 Replies
View Related
May 25, 2010
I'm creating my own title block and inserting a company logo. I go into edit title block and click insert image. I choose my .bmp file then fit it to my title block and exit sketch and save. Once out of the edit, the image looks fine but when I do a print preview the image is stretched and when I actually print the sheet, there is no image at all.
View 3 Replies
View Related
Aug 21, 2013
I work with use autocad 2012, and am trying to create a pdf of a plane containing several aerial photos. I have set ImageFrame to 0. And I use Export to Pdf from output tab. When it creates pdf, images have a gray border or white, so I can see the connection between them.
I have ensured that there is no space between the images. I export from a layout with rotated UCS. The images are Tiff format.
View 4 Replies
View Related
Nov 20, 2012
I am trying to print some white text / couple of lines over top of an image in white - so that they do not blend in after the drawing has been printed.
I am using monochrome printing status - and have set the color printing to (use object color), and set the 'screening' value to '0'.
I have ensured that the color 'white' under plot styles is also set to 255,255,255. I have ensured that the printer configuration for 'Merge Control' is set to 'Lines Overwrite'.
Yet its till prints the lines in Black!!!
The only thing I noticed is that when you look at the layer table itself it still shows the plotter to overwrite white with color : 'color_7' which is black correct?
however the option is greyed out so that you cannot elect or change it... And I cannot find anywhere to alter this color overwrite 'plot style' as it is labelled...
Do I just need to change this 'plot style' setting? where can I find this?
ACAD white layer.jpg
View 0 Replies
View Related
Dec 2, 2011
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
View 7 Replies
View Related
Sep 27, 2013
i am using autocad 2014 when i am try to print the image in big page such as 24 X 24 inches my image will scatter, the curve lines are look like zig zag lines and texts are faded, how to increase the resolution of the image so that i can print it in large paper.my printer is not connected to my computer that's why i have to convert the drawing to jpeg image, and my resolution become very low to print in big size paper.
View 1 Replies
View Related
Sep 26, 2012
Data Connect Image Printing problem.I have an Aerial image that I bought in via Data Connect. It's been working well for a while. Suddenly the next time I go to Print, either to the plotter, DWF or PDF, for some reason the entire Image is thrown to the northwest corner of the viewport at a miniscule scale! The image is fine on-screen, until you print or even do a print preview!
I tried disconnecting and reconnecting, did an audit before I reconnected, deleted all my Cache files, but to no avail! This is not the first time this has happened, but the last time it did, disconnecting, doing an audit, and deleting the Cache files before reconnected appeared to solve the problem. But this time (just when we upgraded to Map 3D 2012), it didn't work.
View 1 Replies
View Related
Sep 13, 2007
Since switching to 2007 our company logo, a png image, plots with a line down the right side the image. It does not show up in plot preview or when plotting to pdf or dwf. I have set image frame to 0 and 2 with no change.
View 4 Replies
View Related
Nov 18, 2011
When in print preview the image is squashed horizontally.
View 2 Replies
View Related
Mar 22, 2012
I need to print this drawing and I cannot get either print to PDF or print to printer working properly.
I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.
No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.
Here's a link that explains what the printer is doing: [URL] .......
The image is supposed to fill the whole viewport, but most of the viewport is blank.
View 0 Replies
View Related
Jul 12, 2011
Can i import an image (such as a photo of a plant) into autocad and print it in colour? I can currently print the image but without colour.
View 6 Replies
View Related
Jan 10, 2014
When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
View 4 Replies
View Related
Jul 25, 2012
Following instructions from Autodesk as to how to install the Raster driver for image exports I installed "plotters" for JPEG, TIFF, BMP and PNG. None of them work. When I try to one of them, the result is a blank file about 39KB in size.
View 1 Replies
View Related
Oct 26, 2012
For some reason I cannot print the whole of an image onto an A4 sheet of paper. I have 2 problems
a) I want the image to be exactly the size of the paper (with no margin). I have removed the margin from the printer dialogue and used the 'print size' command to make the image the right size for an A4 image. The print preview shows there's no margin, but the print still has a small margin.
I am losing about 10 columns of pixels from the left side of the image. Once again the whole image is shown in the preview, but the print has data missing. This still happens when I reduce the size of the image so that there's plenty of room on the paper.
View 2 Replies
View Related
Nov 8, 2012
I'd like to prepare and then print a 3d lenticular image.
View 4 Replies
View Related
Dec 21, 2012
I have someone who wants to make a six foot print of one of my images. Will a 50mb image be large enough? If not, they will need to enlarge on their end (UK). How big will they need to make it.?
View 3 Replies
View Related
Nov 18, 2012
Why is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.
View 1 Replies
View Related
May 5, 2013
I cannot print anything from Photoshop CS5. I always get the message: Could not print “image name” because there is not enough memory (RAM).I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB file because I always get that error message.
(I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)
View 2 Replies
View Related
Sep 13, 2013
I want to prepare my images in PS CS6 for print. I have read several articles that TIFF files print best since they do not lose any information but sometimes you can barely see the difference from a TIFF to a JPEG. However, I have also been told by a professional wedding photographer that you should always give your clients JPEGS since it is such a universal file format. I noticed on websites like CVS photo or Shutterfly they do not even accept TIFF files.
what file settings are best when printing JPEGS?I would normally save a file as the following:
- JPEG (quality 12/baseline optimized)
- 16-bit
- 300 dpi
- 3000x the longest side
- RGB color space
However, when I use the 'Image Processor' in PS to save all of my open files as JPEGs, it always saves them as 8-bit, sRGB color space. I have have a few concerns with this..
- Do JPEGs have to be 8-bit? If so, is this ok for printing? I have heard 16-bit is best.
- Shouldn't print files be RGB color space? NOT sRGB?
- Does the dpi matter?
Is there any easy way to change the auto settings when saving as a JPEG in the 'Image Processor'? Or maybe I could create an action for saving? Although, I have tried this and it never seems to work properly.
View 2 Replies
View Related
Nov 20, 2006
I have a photo that I'd like to print out for 16x24.
How do I do that?
I looked at the Picture Package and the largest size is 8x10.
View 1 Replies
View Related
May 27, 2005
We are an e-commerce company and wish to do a show case of our web sites in a presentation.I have been asked to make some posters and have done some screen shots. The current dpi is 72dpi, and the printers need the highest resolution possible. How can I resize to get the highest resolution possible. I tried resizing using "Image size..." to 300 dpi, then resizing back to the original 72(to see what it would look like), but when going back to 72 dpi it blurs the screen shots. what must I do?
View 1 Replies
View Related
May 10, 2008
I am using CS2. when I print with preview and choose "any" icc profile, I see an off color image. This off color image is printed off color and not what I originally had. It is approximately 1/2 to one stop density lighter (and redder) and the shadows are cyan/blue, instead of neutral black.
If I choose Adobe RGB as the profile and print, the image is close but not correct. This is happening with CS2 and elements 6.
Of course the r1800 is set for ICM and off - no color adjustment.
I have down loaded new profiles, reinstalled my epson r1800, checked for missing files in CS2.
I am running windows XP Home, 2gig memory, dell xps. I have been using this system for over two years without a problem until now.
View 12 Replies
View Related
Mar 4, 2008
I have made a map that I want to print over several pages, then I can tape the pages together. How do I get PS CS3 to do this? I can only see how to scale it to a single page, or it gets cropped. Otherwise I have to split the single image into multiple small one-page sections and print them?
View 3 Replies
View Related
Jun 25, 2012
When I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).
How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.
View 1 Replies
View Related
Jun 1, 2012
So, I have designed a logo for a web site and the site owner wants it for a business card and letterhead. Saving an image for web is easy and I understand all that but how do I prepare a file for a printer? I'm guessing this is just nipping in to the local print shop on the high street.
View 2 Replies
View Related
Jan 26, 2013
How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?
View 2 Replies
View Related
Jun 27, 2012
I am using lightroom 3.6 and I would like to know how to print an image at 100% of it's size for a given resolution. In other words without any ipscaling or interpolation.
View 8 Replies
View Related
Mar 6, 2013
in dummy terms, how to crop a image for print. If I have a image that I have cropped, and I want to print a 4X6 and a 8X10, how do I crop it so parts of the edges do not get cut off?
View 4 Replies
View Related
